Part Number Hot Search : 
BD676 1N2983B D4148 473ML 40N60 SDA5275 D1148 KIA2078
Product Description
Full Text Search
 

To Download R1S-0515 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  
           



   

!
  e-24 www.recom-power.com rev: 0/2014 selection guide part input output output efficiency max number voltage voltage current capacitive smd (3kv) (vdc) (vdc) (ma) (%) load (1) r1s**-xx3.3 (h) 3.3, 5, 12, 15, 24 3.3 303 75 2200f r1s**-xx05 (h) 3.3, 5, 12, 15, 24 5 200 72-78 1000f r1s**-xx09 (h) 3.3, 5, 12, 15, 24 9 111 74-78 1000f r1s**-xx12 (h) 3.3, 5, 12, 15, 24 12 84 75-80 470f r1s**-xx15 (h) 3.3, 5, 12, 15, 24 15 66 75-82 470f r1s**-xx24 (h) 3.3, 5, 12, 15, 24 24 42 74-84 220f r1d**-xx3.3 (h) 3.3, 5, 12, 15, 24 3.3 152 75 1000f r1d**-xx05 (h) 3.3, 5, 12, 15, 24 5 100 72-78 470f r1d**-xx09 (h) 3.3, 5, 12, 15, 24 9 56 74-78 470f r1d**-xx12 (h) 3.3, 5, 12, 15, 24 12 42 75-80 220f r1d**-xx15 (h) 3.3, 5, 12, 15, 24 15 33 75-82 220f r1d**-xx24 (h) 3.3, 5, 12, 15, 24 24 21 74-84 100f specifications ( measured at t a = 25c, nominal input voltage, full load and after warm-up) input voltage range 10% output voltage accuracy 2% typ., 5% max. line voltage regulation all variants 1.2%/1% of vin typ. load voltage regulation 3.3v output types 15% typ., 20% max. (10% to 100% full load) 5v output type 12% typ., 15% max. 9v output type 7% typ., 10% max. 12v, 15v, 24v output types 6% typ., 10% max. output ripple and noise (20mhz bw limited) 50mvp-p typ., 100mvp-p max. operating frequency 20khz min. / 60khz typ. / 100khz max. continued on next page 1 watt smd single & dual output fully rohs 6/6 conform full power at 100c ambient temperature 1kvdc or 3kvdc isolation options ul /csa certified, cb report suitable for fully automated assembly (including vapour phase soldering) optional continuous short circuit protection efficiency to 84% built-in en55022 class a filter features unregulated converters r1s** : ** without marking denotes 5 pins out of 8 fitted (includes /h option) ** with marking 8 denotes 8 pins out of 8 fitted (/h option not available) ** with marking 12 denotes 10 pins out of 12 fitted (includes /h option) r1d** : ** without marking denotes 6 pins out of 10 fitted (includes /h option) ** with marking 10 denotes with 10 pins out of 10 fitted (/h option not available) ** with marking 12 denotes 10 pins out of 12 fitted (includes /h option) ul-60950-1 certified en- 60950-1 certified en-60601-1 certified* ( */h suffix) case and pinning options (note restrictions on /h option) xx = input voltage (other input and output voltage combinations available on request) * add suffix ?h? for 3kv isolation, e.g. r1s-0505/h, r1d-0505/h , r1s12-0505/h, r1d12-0505/h * add suffix ?p? for continuous short circuit protection, e.g. r1s8-0505/p, r1s-0505/h p, r1d12-0505/hp * add suffix -r for tape & reel packing e.g. r1s-0505-r. for more details see application notes. r1s_r1d econoline dc/dc-converter with 3 year warranty description the r1s and r1d converters are of the enclosed open frame type, i.e. they are not potted. the converters are typically used in general purpose and industrial low power isolation and voltage matching applications where an smd converter is required. the converter series feature an extended ambient temperature operating range of -40c to +100c without derating and optional continuous short circuit protection. in addition to two isolation options and three different case formats, the converters are also available prepacked as tape and reel for use with automatic insertion machines. e358085 refer to application notes rohs 2011/65/eu 6/6 derating-graph (ambient temperature)
efficiency at full load see selection guide minimum load = 0% specifications valid for 10% minimum load only. isolation voltage (tested for 1 second) 1000vdc (rated for 1 minute***) 500vac / 60hz isolation voltage h-suffix (tested for 1 second) 3000vdc h-suffix (rated for 1 minute***) 1500vac / 60hz isolation capacitance r1s, r1s8, r1d, r1d10 15pf min. / 70pf max. r1s12, r1d12 10pf min. / 75pf max. isolation resistance 10 g min. short circuit protection 1 second p-suffix continuous operating temperature range (free air convection) -40c to +100c (see graph) storage temperature range -55c to +125c reflow temperature rohs compliant 245c (30 sec), peak 255c (5 sec) max. vapour phase process (for more details see application notes) 230c (90 sec) max. relative humidity 95% rh humidity susceptibility test 1000 hrs / 90% humidity / +85c ambient package weight r1s 1.0g r1s8 1.1g r1s12, r1d, r1d10, r1d12 1.2g packing quantity r1s, r1s8 40 pcs per tube r1s12, r1d, r1d10, r1d12 33 pcs per tube all types 500 pcs per reel mtbf (+25c) using mil-hdbk 217f 4275 x 10 3 hours (+85c) using mil-hdbk 217f 1365 x 10 3 hours certifications cb test report report: us/14402a/ul iec 60950-1:2001 1st ed. ul general safety report: e358085 ul 60950-1 2nd ed. cul general safety c22.2 no. 60950-1-03 en medical safety report: mdd1205098-2 + rm1205098-2 iec/en 60601-1 3rd edition medical report + iso14971 risk assessment en general safety report: spclvd1211033-3 en60950-1: 2006 + a12:2011 conducted / radiated emissions en55022 level a www.recom-international.com e-25 rev: 0/2014 r1s_r1d series specifications ( measured at t a = 25c, nominal input voltage, full load and after warm-up) econoline dc/dc-converter 3 +
+4       3 +
+4%&'       *+
  "("   #
$%&' (    #
$ )*     ( *+
   ( ( ( ( ( ( "("  r1s**-xx05 } detailed information see application notes chapter "mtbf" typical characteristics 1 1 ,)( 1 2    ,*
&'
  2 4+*&'&
r1s-r1d tolerance envelope 3 +
+4       3 +
+4%&'       *+
  "("   3 +
+4       3 +
+4%&'       *+
  "("   r1d**-xx05 ***any data referred to in this datasheet are of indivative nature and based on our practical experience only. for further deta ils, please refer to our application notes. notes note 1: maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter.
e-26 www.recom-power.com rev: 0/2014 package style and pinning (mm) econoline dc/dc-converter r1s** : ** without marking denotes 5 pins out of 8 fitted (includes /h option) e.g. r1s-0505, r1s-0505/h, r1s-0505/hp ** with marking 8 denotes 8 pins out of 8 fitted (/h option not available) e.g. r1s8-0505, r1s8-0505/p r1d** : ** without marking denotes 6 pins out of 10 fitted (includes /h option) e.g. r1d-0505, r1d-0505/h, r1d-0505/hp ** with marking 10 denotes with 10 pins out of 10 fitted (/h option not available) e.g. r1d10-0505, r1d10-0505/p 5 pin single smd package 6 pin dual smd package  (    ( (5" (. (. .( ( (. (              ( (. (5 .( ( ( ( (     
  ( (  .   ( . ( (. ( ( pin connections pin # single dual 1 ?vin ?vin 2 +vin +vin 4 ?vout com 5 +vout ?vout 7 no pin +vout 8 nc no pin 10 no pin nc nc = no connection xx.x 0.5 mm xx.xx 0.25 mm recommended footprint details recommended footprint details note: /h option is available in these pin packages 8 pin single smd package 10 pin dual smd package  (    ( (5" (. (. .( ( (. (              ( (. (5 .( ( ( ( (     
  ( (  .   ( . ( (. ( ( . " "  . "   / " /   pin connections pin # single dual d(isol) 1 ?vin ?vin ?vin 2 +vin +vin +vin 3ncnc- 4 ?vout com ?vout1 5 +vout ?vout +vout1 6 nc nc ?vout2 7 nc +vout +vout2 8ncnc- 9 - nc - 10 - nc nc nc = no connection recommended footprint details recommended footprint details note: /h option is not available in these pin packages xx.x 0.5 mm xx.xx 0.25 mm r1s_r1d series r1s-r1d
www.recom-international.com e-27 rev: 0/2014 econoline dc/dc-converter package style and pinning (mm) 12 pin single and dual smd package  (  
  6"(    
   ( (. (5 .( ( ( .   ( .         "  "  ( (. ( pin connections pin # single dual 1 ?vin ?vin 2 +vin +vin 3ncnc 5 ?vout com 6 nc ?vout 7ncnc 8 +vout +vout 10 nc nc 11 nc nc 12 nc nc nc = no connection recommended footprint details note: /h option is available in this pin package emc filtering - suggestion for en55022 class b (conducted and emitted) xx.x 0.5 mm xx.xx 0.25 mm r1s_r1d series r1s-r1d r1s** : ** with marking 12 denotes 10 pins out of 12 fitted (includes /h option) e.g. r1s12-0505, r1s12-0505/h, r1s12-0505/hp r1d** : ** with marking 12 denotes 10 pins out of 12 fitted (includes /h option) e.g. r1d12-0505, r1d12-0505/h, r1d12-0505/hp  8;
  7 .8%9,# & # #  8;
1,  7 .8%9,# & ,  # # standard and /h versions c 1 l 1 vin 4.7f 3.3h 3.3v 2.2f 4.7h 5v 2.2f 10h 9v 2.2f 10h 12v 2.2f 22h 15v 4.7f 22h 24v /p and /hp versions c 1 l 1 vin 4.7f 10h 3.3v 10f 10h 5v 4.7f 22h 9v 4.7f 22h 12v 4.7f 22h 15v 10f 47h 24v c1 = mlcc l1 = smd inductor the product information and specifications are subject to change without prior notice. all products are designed for non-safety critical commercial and industrial applications. the buyer agress to implement safeguards that anticipate the consequences of any failures that might cause harm, loss of life a nd/or damage property.


▲Up To Search▲   

 
Price & Availability of R1S-0515

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X