View AD8665ARZ_7663209.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

16 v, 4 mhz rr0 amplifier s ad8665 / ad8666 / ad8668 rev. b information furnished by analog devices is b elieved to be accurate and reliable. however, no responsibility is assumed by analog devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. specifications subject to change without notice. n o license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. one technology way, p.o. box 9106, norwood, ma 02062 - 9106, u.s.a. tel : 781.329.4700 www.analog.com fax: 781.461.3113 ? 2006 C 2011 analog devices, inc. all rights reserved. features offset voltage: 2.5 mv max low input bias current: 1 pa max single - supply operation: 5 v to 16 v dual - supply operation: 2.5 v to 8 v low noise: 8 nv/hz @ 10 khz wide bandwidth: 4 mhz rail - to - rail output unity - gain stable lead - free packaging ad8666/ad8668 q ualified for automotive applications applications sensor amplification reference buffers medical equipment physiological measurements signal filters and conditioning consumer audio photodiode amplification adc driver level shifting circuits general description the ad866x family is single supply, rail - to - rail output amplifiers with low noise performance featuring an extended operating range with supply voltages up to 16 v. they also feature low input bias currents, wide signal bandwidth, and low input voltage and current noise. for lower offset voltage, choose the ad8661/ad8662/ ad 8664 family . the combination of low offsets, very low input bias currents, and wide supply range make these amplifiers useful in a wide variety of cost sensitive applications normally associat ed with much higher priced jfet amplifiers. systems u sing high impedance sensors, such as photo diodes, benefit from the combination of low input bias current, low noise, and low offset and bandwidth. the wide operating voltage range matches high performan ce adcs and dacs. audio applications and medical monitoring equipment can take advantage of the high input impedance, low voltage and current noise, wide bandwidth, and the lack of popcorn noise found in many other low input bias current amplifiers. the ad 866x family is specified over the extended industrial temperature range (?40 c to +125 c). see the ordering guide for automotive models. pin configurations figure 1 . ad8665, 5 - lead sot - 23 (rj - 5) figure 2 . ad8665, 8 - lead soic_n (r - 8) figure 3 . ad8666, 8 - lead soic_n (r - 8) figure 4 . ad8666, 8- lead msop (rm - 8) figure 5 . ad8668, 14 - lead tssop (ru - 14) figure 6. ad8668, 14 - lead soic_n (r - 14) 1 2 3 5 4 ?in +i n v+ out ad8665 top view (not to scale) v? 06195-039 nc 1 ?in 2 +in 3 vee 4 nc 8 vcc 7 out 6 nc 5 ad8665 top view (not to s ca le) nc = no connect 06195-040 out a 1 ?in a 2 +in a 3 v? 4 v+ 8 out b 7 ?in b 6 +in b 5 ad8666 top view (not to s ca le) 06018-001 out a 1 ?in a 2 +in a 3 v? 4 v+ 8 out b 7 ?in b 6 +in b 5 ad8666 top view (not to s ca le) 06195-002 1 2 3 4 5 6 7 ad8668 in a +in a v+ out b ?in b +in b out a 14 13 12 11 10 9 8 ?in d +in d v? out c ?in c +in c out d top view (not to s ca le) 06195-003 out a ?in a +in a v+ ou t d ?in d +in d v? +in b +in c ?in b o ut b ?in c out c ad8648 top view (not to s ca le) out a ad8668 top view (not to s ca le) ad8648 top view (not to s ca le) 6 1 2 3 4 5 7 14 13 12 11 10 9 8 ad8668 top view (not to s ca le) 06195-004
ad8665/ad8666/ad8668 rev. b | page 2 of 16 table of contents features .............................................................................................. 1 applications ....................................................................................... 1 general descript ion ......................................................................... 1 pin configurations ........................................................................... 1 revision history ............................................................................... 2 specifications ..................................................................................... 3 absolute maximum ratings ............................................................5 thermal resistance .......................................................................5 esd caution ...................................................................................5 typical performance characteristics ..............................................6 outline dimensions ....................................................................... 12 ordering g uide .......................................................................... 14 revision history 7 /11 rev. a to rev. b change to features and general description sections ............. .. 1 updated outline dimensions ....................................................... 12 changes to ordering guide .......................................................... 13 added automotive products section ........................................... 13 10/06 rev. 0 to rev. a added ad8665 ................................................................... universal added new figure 1 and figure 2, renumbered sequentially ................................................................ 1 changes to table 4 ............................................................................ 5 changes to figure 8, figure 9, and figure 11 ............................... 6 change to figure 40 ....................................................................... 11 updated outline dimensions ....................................................... 12 changes to ordering guide .......................................................... 13 4/06 rev 0: initial version
ad8665/ad8666/ad8668 rev. b | page 3 of 16 specifications v dd = 5 .0 v , v cm = v dd /2, t a = 25 o c, unless otherwise no ted. table 1 . parameter symbol conditions min typ max unit input characteristics offset voltage v os v cm = 2.5 v 0.7 2.5 mv v cm = ?0.1 v to +3.0 v 3.0 mv ?40c < t a < +125c 5.0 mv offset voltage drift v os /t ?40c < t a < +125c 3.0 10 v/c input bias current i b 0.2 1 pa ?40c < t a < +125c 550 pa input offset current i os 0.1 0.5 pa ?40c < t a < +125c 70 pa input voltage range v cm ?0.1 +3.0 v common - mode rejection ratio cmrr v cm = ?0.1 v to +3.0 v 84 100 db ?40c < t a < +125c 79 db large - signal voltage gain a vo r l = 2 k, v o = 0.5 v to 4.5 v 68 145 v/mv output characteristics output voltage high v oh i out = 1 ma 4.88 4.93 v ?40c < t a < +125c 4.86 v output voltage low v ol i out = 1 ma 50 85 mv ?40c < t a < +125c 105 mv short - circuit output current i sc 19 ma closed - loop output impedance z out at 1 mhz, a v = 1 50 power supply power supply rejection ratio psrr v dd = 5.0 v to 16 v 98 115 db ?40c < t a < +125c 94 db supply current per amplifier i sy 1.1 1.4 ma ?40c < t a < +125c 2.0 ma dynamic performance slew rate sr r l = 2 k 3.5 v/s gain bandwidth product gbp 4 mhz phase margin m 70 degrees noise performance peak -to - peak noise e n p-p 0.1 hz to 10 hz 2.4 v p -p voltage noise density e n f = 1 khz 10 nv/hz f = 10 khz 8 nv/hz channel separation cs f = 10 khz ?115 db
ad8665/ad8666/ad8668 rev. b | page 4 of 16 v dd = 16 v , v cm = v dd /2, t a = 25 o c, unless otherwise no ted. table 2 . parameter symbol conditions min typ max unit input characteristics offset voltage v os v cm = 8 v 0.6 2.5 mv v cm = ?0.1 v to +14.0 v 3.0 mv ?40c < t a < +125c 5.0 mv offset voltage drift v os /t ?40c < t a < +125c 3.0 10 v/c input bias current i b 0.2 1 pa ?40c < t a < +125c 550 pa input offset current i os 0.1 0.5 pa ?40c < t a < +125c 70 pa input voltage range v cm ?0.1 +14.0 v common - mode rejection ratio cmrr v cm = ?0.1 v to +14.0 v 90 110 db ?40c < t a < +125c 80 db large - signal voltage gain a vo r l = 2 k, v o = 0.5 v to 15.5 v 130 255 v/mv output characteristics output voltage high v oh i out = 1 ma 15.94 15.96 v ?40c < t a < +125c 15.90 v output voltage low v ol i out = 1 ma 22 40 mv ?40c < t a < +125c 50 mv short - circuit output current i sc 140 ma closed - loop output impedance z out at 1 mhz, a v = 1 50 power supply power supply rejection ratio psrr v dd = 5.0 v to 16 v 98 115 db ?40c < t a < +125c 94 db supply current per amplifier i sy 1.15 1.55 ma ?40c < t a < +125c 2.0 ma dynamic performance slew rate sr r l = 2 k 3.5 v/s gain bandwidth product gbp 4 mhz phase margin m 73 degrees noise performance peak -to - peak noise e n p-p 0.1 hz to 10 hz 2.5 v p -p voltage noise density e n f = 1 khz 10 nv/hz f = 10 khz 8 nv/hz channel separation cs f = 10 khz ?115 db
ad8665/ad8666/ad8668 rev. b | page 5 of 16 absolute maximum rat ings table 3. parameter rating supply voltage 18 v input voltage gnd to v dd differential input voltage 18 v output short - circuit to gnd indefinite storage temperature range ?65c to +150c operating temperature range ?40c to +125c lead temperature (soldering, 60 sec) 300c junction temperature 150c stresses above those listed under absolute maximum ratings m ay cause permanent damage to the device. this is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. exposure to absolute maximum rating conditions for extended per iods may affect device reliability. thermal resistance table 4 . thermal resistance package type ja jc unit 5- lead sot - 23 (rj -5) 240 92 c/w 8- lead soic_n (r -8) 158 43 c/w 8- lead msop (rm -8) 210 45 c/w 14- lead soic (r - 14) 120 36 c/w 14- lead tssop (ru - 14) 180 35 c/w esd caution
ad8665/ad8666/ad8668 rev. b | page 6 of 16 typical performance characteristics figure 7 . input offset voltage distribution figure 8. v os drift (tcv os ) distribution figure 9 . offset voltage vs. common - mode voltage figure 10 . input bias current vs. temperature figure 11 . output saturation voltage vs. load current figure 12 . output saturation voltage vs. temperatur e 100 0 ?3 3 input offset voltage (mv) number of amplifiers 90 80 70 60 50 40 30 20 10 ?2 ?1 0 1 2 v dd = 16v v cm = 8v t a = 25c 600 amplifiers 06195-005 20 0 0 12 tcv os ( v/c) number of amplifiers 18 16 14 12 10 8 6 4 2 1 2 3 4 5 6 7 8 9 10 11 v dd = 16v v cm = 8v ?40c < t a < +125c 300 amplifiers 06195-006 5 ?5 ?1 15 input common-mode voltage (v) input offset voltage (mv) 4 3 2 1 0 ?1 ?2 ?3 ?4 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 v dd = 16v t a = 25c 06195-007 temperature (c) input bias current (pa) ?40 0 300 250 200 150 100 50 120 10080 40 60 20 0 ?20 v s = 5v and 16v 06195-008 10000 0.1 0.001 100 load current (ma) output saturation voltage (mv) 0.01 0.1 1 10 1 10 100 1000 v dd = 16v t a = 25c v dd to v oh sourcing v ol sinking 06195-009 100 0 ?40 120 temperature (c) output saturation voltage (mv) 80 60 40 20 ?20 0 20 40 60 80 100 v dd = 16v i out = 1ma v dd to v oh sourcing v ol sinking 06195-010
ad8665/ad8666/ad8668 rev. b | page 7 of 16 figure 13 . open - loop gain and phase vs. frequency figure 14 . closed - loop output impedance vs. frequency figure 15 . common - mode rejection ratio vs. frequency figure 16 . power supply rejection ratio vs. frequency figure 17 . voltage noise density vs. frequency figure 18 . 0.1 hz to 10 hz voltage noise 80 ?20 1k 10m frequency (hz) open-loop gain (db) 10k 100k 1m 60 40 20 0 0 225 open-loop phase shift (degrees) 45 90 135 180 v dd = 16v r l = 2k ? c l = 10pf m = 73 gain phase 06195-011 1000 0.01 100 10m frequency (hz) z out ( ?) 1k 10k 100k 1m 0.1 1 10 100 a v = +100 v dd = 16v a v = +1 06195-012 a v = +10 120 0 1k 4m frequency (hz) cmrr (db) 10k 100k 1m 100 80 60 40 20 v dd = 16v t a = 25c 06195-013 100 0 1k 4m frequency (hz) psrr (db) 10k 100k 1m 80 60 40 20 v dd = 16v t a = 25c psrr? psrr+ 06195-014 100 1 10 10k frequency (hz) voltage noise density (nv/ hz ) 100 1k 10 v dd = 5v to 16v t a = 25c 06195-015 time (1s/div) voltage (1 v/div) v dd = 5v to 16v t a = 25c 06195-016
ad8665/ad8666/ad8668 rev. b | page 8 of 16 figure 19 . small - signal transient response figure 20 . large - signal transient response figure 21 . small - signal overshoot vs. load capacitance figure 22 . positive overload recovery time figure 23 . negative overload recovery time figure 24 . input offset voltage distribution time (0.5 s/div) v out (20mv/div) v dd = 16v r l = 10k ? c l = 10pf a v = +1 06195-017 time (2 s/div) v out (v) v dd = 8 v r l = 10k ? c l = 10pf a v = +1 10 ?10 ?8 ?6 ?4 ?2 2 4 6 8 0 06195-018 70 0 1 1000 load capacitance (pf) overshoot (%) 10 100 60 50 40 30 20 10 v dd = 16v v in = 100mv p-p +os ?os 06195-019 time (5s/div) 0v 8v ?100mv 0v v in v out v dd = 8v a v = ?100 06195-020 time (5s/div) ?8v 0v 0v 100mv v in v out v dd = 8v a v = ?100 06195-021 80 0 ?3 3 input offset voltage (mv) number of amplifiers 70 60 50 40 30 20 10 ?2 ?1 0 1 2 v dd = 5v v cm = 2.5v t a = 25c 550 amplifiers 06195-022
ad8665/ad8666/ad8668 rev. b | page 9 of 16 figure 25 . v os drift (tcv os ) distribution figure 26 . offset voltage vs. common - mode voltage figure 27 . outpu t saturation voltage vs. load current figure 28 . output saturation voltage vs. temperature figure 29 . open - loop gain and phase vs. frequency figure 30 . closed - loop output impedance vs. frequency 30 0 0 10 tcv os ( v/c) number of amplifiers 25 20 15 10 5 1 2 3 4 5 6 7 8 9 v dd = 5v v cm = 2.5v ?40c t a +125c 300 amplifiers 06195-023 5 ?5 ?0.5 3.5 input common-mode voltage (v) input offset voltage (mv) 4 3 2 1 0 ?1 ?2 ?3 ?4 0 0.5 1.0 1.5 2.0 2.5 3.0 v dd = 5v t a = 25c 06195-024 0.1 0.001 load current (ma) output saturation voltage (mv) 0.01 0.1 1 10 20 1 10 100 1000 3000 v dd = 5v t a = 25c v dd to v oh sourcing v ol sinking 06195-025 120 0 ?40 120 temperature (c) output saturation voltage (mv) 100 80 60 40 20 ?20 0 20 40 60 80 100 v dd = 5v i load = 1ma v dd to v oh sourcing v ol sinking 06195-026 80 ?20 1k 10m frequency (hz) open-loop gain (db) 10k 100k 1m 60 40 20 0 0 225 open-loop phase shift (degrees) 45 90 135 180 m = 70 gain phase v dd = 5v r l = 2k ? c l = 10pf 06195-027 1000 0.01 100 10m frequency (hz) z out ( ?) 1k 10k 100k 1m 0.1 1 10 100 v dd = 5v a v = +100 a v = +10 a v = +1 06195-028
ad8665/ad8666/ad8668 rev. b | page 10 of 16 figure 31 . common - mode rejection ratio vs. frequency figure 32 . power supply rejection ratio vs. frequency figure 33 . small - signal transient response figure 34 . large - signal transient response figure 35 . small - signal overshoot vs. load capacitance figure 36 . positive overload recovery time 120 0 1k 4m frequency (hz) cmrr (db) 10k 100k 1m 100 80 60 40 20 v dd = 5v t a = 25c 06195-029 100 0 1k 4m frequency (hz) psrr (db) 10k 100k 1m 80 60 40 20 v dd = 5v t a = 25c psrr? psrr+ 06195-030 time (0.4 s/div) v out (20mv/div) v dd = 5v r l = 100k ? c l = 10pf a v = +1 06195-031 time (1 s/div ) v out (v) 1.5 ?2.5 1.0 0.5 0 ?0.5 ?1.0 ?1.5 ?2.0 v dd = 2.5 v r l = 10k ? c l = 10pf a v = +1 06195-032 70 0 1 1000 load capacitance (pf) overshoot (%) 10 100 60 50 40 30 20 10 v dd = 5v v in = 100mv p-p ?os +os 06195-033 time (4 s/div ) 2.5v 0v 0v ?100mv v dd = 2.5 v a v = ?100 v out v in 06195-034
ad8665/ad8666/ad8668 rev. b | page 11 of 16 figure 37 . negative overload recovery time figure 38 . supply current vs. temperature figure 39 . supply current vs. supply voltage figure 40 . no output phas e reversal time (4 s/div ) 100mv 0v 0v ?2.5v v dd = 2.5 v a v = ?100 v out v in 06195-035 2.0 0 ?40 120 temperature (c) supply current (ma) 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 ?20 0 20 40 60 80 100 v out = v dd /2 v dd = 16v v dd = 5v 06195-036 2.00 0 0 16 supply voltage (v) supply current (ma) 1.75 1.50 1. 25 1.00 0.75 0.50 0.25 2 4 6 8 10 12 14 06195-037 time (10 s/div) voltage (v) v out v in 10 ?10 8 6 4 2 0 ?2 ?4 ?6 ?8 v dd = 8 v a v = +1 06195-038
ad8665/ad8666/ad8668 rev. b | page 12 of 16 outline dimensions figure 41 . 8 - lead standard small outline package [soic_n] narrow body (r- 8) dimensions shown in millimeters and (inches) figure 42 . 8 - lead mini small outline package [msop] (rm - 8) dimensions shown in millimeters controlling dimensions are in millimeters; inch dimensions (in parentheses) are rounded-off millimeter equivalents for reference only and are not appropriate for use in design. compliant to jedec standards ms-012-aa 012407-a 0.25 (0.0098) 0.17 (0.0067) 1.27 (0.0500) 0.40 (0.0157) 0.50 (0.0196) 0.25 (0.0099) 45 8 0 1.75 (0.0688) 1.35 (0.0532) seating plane 0.25 (0.0098) 0.10 (0.0040) 4 1 8 5 5.00 (0.1968) 4.80 (0.1890) 4.00 (0.1574) 3.80 (0.1497) 1.27 (0.0500) bsc 6.20 (0.2441) 5.80 (0.2284) 0.51 (0.0201) 0.31 (0.0122) coplanarity 0.10 compliant to jedec standards mo-187-aa 6 0 0.80 0.55 0.40 4 8 1 5 0.65 bsc 0.40 0.25 1.10 max 3.20 3.00 2.80 coplanarity 0.10 0.23 0.09 3.20 3.00 2.80 5.15 4.90 4.65 pin 1 identifier 15 max 0.95 0.85 0.75 0.15 0.05 10-07-2009-b
ad8665/ad8666/ad8668 rev. b | page 13 of 16 figure 43 . 14 - lead thin shrink small outline package [tssop] (ru - 14) dimensions shown in millimeters figure 44 . 14 - lead standard small outline package [soic_n] narrow body (r- 14) dimensions shown in millimeters and (inches) compliant to jedec standards mo-153-ab-1 061908-a 8 0 4.50 4.40 4.30 14 8 7 1 6.40 bsc pin 1 5.10 5.00 4.90 0.65 bsc 0.15 0.05 0.30 0.19 1.20 max 1.05 1.00 0.80 0.20 0.09 0.75 0.60 0.45 coplanarity 0.10 sea ting plane controlling dimensions are in millimeters; inch dimensions (in parentheses) are rounded-off millimeter equi v alents for reference on ly and are not appropri a te for use in design. compliant t o jedec s t andards ms-012-ab 060606- a 14 8 7 1 6.20 (0.2441) 5.80 (0.2283) 4.00 (0.1575) 3.80 (0.1496) 8.75 (0.3445) 8.55 (0.3366) 1.27 (0.0500) bsc sea ting plane 0.25 (0.0098) 0.10 (0.0039) 0.51 (0.0201) 0.31 (0.0122) 1.75 (0.0689) 1.35 (0.0531) 0.50 (0.0197) 0.25 (0.0098) 1.27 (0.0500) 0.40 (0.0157) 0.25 (0.0098) 0.17 (0.0067) coplanarit y 0.10 8 0 45
ad8665/ad8666/ad8668 rev. b | page 14 of 16 figure 45 . 5 - lead small outline transistor package [sot - 23] (rj - 5) dimensions shown in millimeters ordering guide model 1 , 2 temperature range package description package option branding AD8665ARZ ?40c to +125c 8- lead soic_n r-8 AD8665ARZ - reel ?40c to +125c 8- lead soic_n r-8 AD8665ARZ - reel7 ?40c to +125c 8- lead soic_n r-8 ad8665arjz - r2 ?40c to +125c 5- lead sot - 23 rj -5 a1b ad8665arjz - reel ?40c to +125c 5- lead sot - 23 rj -5 a1b ad8665arjz - reel7 ?40c to +125c 5- lead sot - 23 rj -5 a1b ad8666arz ?40c to +125c 8- lead soic_n r-8 ad8666arz - reel ?40c to +125c 8- lead soic_n r-8 ad8666arz - reel7 ?40c to +125c 8- lead soic_n r-8 ad8666armz ?40c to +125c 8- lead msop rm -8 a16 ad8666armz - reel ?40c to +125c 8- lead msop rm -8 a16 ad8666warz -r7 ?40c to +125c 8- lead soic_n r-8 ad8666warz -rl ?40c to +125c 8- lead soic_n r-8 ad8668arz ?40c to +125c 14- lead soic_n r- 14 ad8668arz - reel ?40c to +125c 14- lead soic_n r- 14 ad8668arz - reel7 ?40c to +125c 14- lead soic_n r- 14 ad8668aruz ?40c to +125c 14- lead tssop ru -14 ad8668aruz - reel ?40c to +125c 14- lead tssop ru -14 ad8668waruz - r7 ?40c to +125c 14- lead tssop ru -14 ad8668waruz - rl ?40c to +125c 14- lead tssop ru -14 1 z = rohs compliant model 2 w = qualified for automotive applications. automotive products the ad8666w/ad8668w models are available with controlled manufacturing to support the quality and reliability requirements of automotive applications. note that the se automotive models may have specifications that differ from the commercial models; therefore, designers should review the specifications section of this data sheet carefully. only the automotive grade products shown are available for use in automotive applications. contact your local analog devices account representative for specific product ordering inform ation and to obtain the specific automotive reliability repor ts for these models. compliant to jedec standards mo-178-aa 10 5 0 seating plane 1.90 bsc 0.95 bsc 0.60 bsc 5 1 2 3 4 3.00 2.90 2.80 3.00 2.80 2.60 1.70 1.60 1.50 1.30 1.15 0.90 0.15 max 0.05 min 1.45 max 0.95 min 0.20 max 0.08 min 0.50 max 0.35 min 0.55 0.45 0.35 11-01-2010-a
ad8665/ad8666/ad8668 rev. b | page 15 of 16 notes
ad8665/ad8666/ad8668 rev. b | page 16 of 16 notes ? 2006 C 2011 an alog devices, inc. all rights reserved. trademarks and registered trademarks are the property of their respective owners. d06195 -0- 7/11(b)

▲Up To Search▲

Price & Availability of AD8665ARZ

	To Download AD8665ARZ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .