? 5 models ranging from 35w to 250w with a large power reserve ? capable of handling 70v, 25v, 8-ohm, and 4-ohm speaker loads ? 8 module bays ? wide selection of advanced plug-in modules ? 2 module bays capable of handling signal processing plug-in output modules ? 4 levels of priority between modules ? 11 -segment led output level meter monitors the output level of the power amplifier with peak and average meter switch ? motorized master volume control that can be remotely operated ? bass and treble controls ? two-color led for each channel indicates input active/clipping ? lockable switch permits user to select either trans- former-coupled outputs or a direct low-impedance output ? 5-position barrier strip, with clamping washers, pro- vides connections for speaker loads ? master mute function overrides all audio from the mixer section of the amplifier ? screw terminal for master mute and remote volume control functions ? each of the 8 module bays has an associated inde- pendent volume control ? bass and treble control bypass switch (located in module bay 6) ? 1 25 hz lo-cut feature (switch located in module bay 6) ? signal processing insert jacks allow external equip- ment to be inserted between the pre-amp output and the power amp input ? pre-eq unbalanced buffer output signal ?post? all unit controls, but ?pre? any external signal process- ing equipment connected ? grounded, unswitched ac convenience receptacle with a 500w maximum capacity provided for exter- nal equipment ? remote volume control panel (rvcp) (sold sepa- rately) ? security cover to protect volume, bass, and treble controls (pvsc) (sold separately) ? rack mountable (rack mounting kit rpk87 sold sep- arately) ? 2 rack spaces high (3- 1 /2") features description specifications subject to change without notice. ? 2002 bogen communications, inc. part no. 54-80 1 3-0 1 r2 elec printed in u.s.a. 0210 power vector modular amplifiers models v35,v60, v 1 00,v 1 50, and v250 bogen's power vector modular amplifiers offer a wide range of power from which to choose from, with five models ranging from 35w to 250w. the amplifiers are designed to work with both high- (70/25v) and low- (4/8-ohm) impedance speaker systems. each model includes eight module bays for plug-in input modules and allows up to four levels of priority between modules. two module bays are capable of accepting signal processing plug-in output modules. each module is controlled by an independent volume control with an associated signal/clip led for signal status. an 11 -segment led output meter monitors output signal level. each model includes a motorized master volume control that can be controlled using a remote volume control panel (rvcp, sold separately).
the amplifier shall be a bogen power vector amplifier, model v35,v60,v 1 00,v 1 50 or v250. the amplifier shall be compatible with both high- (70/25v) and low- (4/8-ohm) impedance speakers, with the capability of 35, 60, 1 00, 1 50, or 250 watts, respectively. the amplifier shall provide 8 module bays for plug-in input modules with two of the bays also capable of handling plug- in signal processing output modules.there shall be 4 levels of priority between modules. each of the 8 module bays shall have an associated inde- pendent volume control. each independent volume control shall have a signal/clip led to indicate if a clipping condition is occuring. each amplifier shall also include bass and treble controls, as well as a motorized master volume control, which can be remotely operated using the rvcp accesso- ry (sold separately). two screw terminals shall be provided for invoking a mas- ter mute function that will interrupt all audio from the mixer section of the power vector amplifier. an 11 -segment led output level meter will register either the average or peak level of the amplifier?s output level, determined by an average/peak switch. each power vector amplifier shall have a tone control bypass switch and a low-cut filter switch located on the rear of the amplifier in module bay 6. a lockable switch will permit the selection of transformer- coupled output or direct output for speaker runs. master mute and remote volume control functions are controlled using a screw terminal. signal processing insert jacks (rca connectors) will allow external equipment to be inserted between the pre-amp output and the power amp input. each model will have a pre-eq unbalanced (rca jack) buffer output whose signal is post all volume controls, tone controls, and output module signal processing, but before (pre-eq) any external signal processing equipment con- nected to the signal processing insert jacks. each amplifier will include a 500w maximum, unswitched ac power receptacle. the amplifier shall fit into a 1 9" rack and fit in two rack spaces. it shall allow the attachment of feet for tabletop placement.each model shall measure 17" w x 3- 1/2" h x 13-1/2" d.the v35 shall weigh 24 lb., the v60 - 28 lb., the v 1 00 - 32 lb., the v 1 50 - 35 lb., and the v250 - 40 lb. architect and engineer specifications 50 spring street, ramsey, new jersey 07446, u.s.a. 20 1 -934-8500 fax: 20 1 -934-9832 web site: www.bogen.com power output (rms): v35 v60 v 1 00 v 1 50 v250 rated: 35w 60w 1 00w 1 50w 250w typical @ 1 khz:* 45w 85w 1 40w 200w 340w frequency response transformer: 45-20 khz; 0/-2 db direct: 20-20 khz; 0/- 1 db distortion transformer: 0.5%** direct: 0. 1 %** (.05 typical @ 1 khz) signal-to-noise ? fundamental: -94 db with aux module: -70 db with mic module: -60 db with tel module: -70 db tone controls bass frequency: 1 00 hz (+/- 1 0 db minimum) treble frequency: 1 0 khz (+/- 1 0 db minimum) low cut frequency: 1 25 hz @ -6 db/octave sensitivity 0.4v (at module bay connector) output regulation: 2 db or better, no load to full load output impedance transformer-coupled: 70v, 25v, 8 ohms (bal or unbal) direct coupled: 4 ohms inserts insert "out" level: 1 vrms (@frp) insert "out" impedance: 50 ohms maximum insert "in" sensitivity: 1 vrms insert "in" impedance: 1 0k ohms minimum pre-eq output output level: 4vrms (@frp) output impedance: 50 ohms maximum ac power receptacle: 500 watts maximum power, unswitched ac voltage: 1 20v ac, 60hz ac current: v35 v60 v 1 00 v 1 50 v250 0.6a 1 .3a 2.0a 3.5a 5.5a product weight (lb.): v35 v60 v 1 00 v 1 50 v250 24 28 32 35 40 dimensions: 1 6- 1 /2" w x 3- 1 /2" h x 1 2" d (all models) technical specifications * typical, @ 1 khz/0. 1% thd /4 ?)
|