description the slim font seven segment displays incorporates a new slim font character design. this slim font features narrow width, specially mitered segments to give fuller appearance to the illuminated character. faces of these displays are painted a neutral gray for enhanced on/off contrast. all devices are available in either common anode or common cathode configuration with right hand decimal point. features as alingap red color gray face paint gray package gives optimum contrast design flexibility common anode or common cathode excellent appearance slim font design mitered corners, evenly illuminated segments devices as alingap red description hdsp-561c common anode hdsp-563c common cathode hdsp-56xc series 13 mm slim font seven segment displays data sheet
2 part numbering system notes: 1. for codes not listed in the figure above, please refer to the respective datasheet or contact your nearest avago representative for details. 2. bin options refer to shippable bins for a part number. color and intensity bins are typically restricted to 1 bin per tube (exceptions may apply). please refer to respective datasheet for specific bin limit information. 5082 -x x x x-x x x x x hdsp-x x x x-x x x x x mechanical options [1] 00: no mechanical option color bin options [1,2] 0: no color bin limitation maximum intensity bin [1,2] 0: no maximum intensity bin limitation minimum intensity bin [1,2] 0: no minimum intensity bin limitation device configuration/color [1] c: alingap red device specific configuration [1] refer to respective datasheet package [1] refer to respective datasheet
3 12.25 ?0.25 (0.482) 1.25 (0.049) 7.40 (0.292) 1.25 (0.049) 10 13.00 (0.512) 17.50 ?0.3/?.25 (0.689) 6.40 ?0.25 (0.252) 7.00 ?0.25 (0.276) 3.60 ?0.3 (0.142) 15.24 ?0.3 (0.600) 0.30 ?0.08 typ. (0.012) 45 a dp b c f e g d 10 9 8 7 6 123 4 5 0.50 ?0.08 (0.020) 3.59 ?0.3 typ. (0.141) 2.54 ?0.3 typ. (0.100) package dimensions and internal circuit pin function 1e 2d 3 common a/c 4c 5dp 6b 7a 8 common a/c 9f 10 g notes: 1. all dimensions are in millimeters (inches). 2. unless otherwise stated, tolerances are 0.25 mm.
4 absolute maximum ratings at t a = 25?c description symbol hdsp-561c/563c units dc forward current per segment or dp [1,2,3] i f 50 ma peak forward current per segment or dp [2,3] i peak 100 ma average forward current [3] i ave 30 ma reverse voltage per segment or dp (i r = 100 a) v r 5v operating temperature t o ?0 to +105 ?c storage temperature t s ?0 to +120 ?c wave soldering conditions temperature 250 ?c time 3 s notes: 1. derate linearly as shown in figure 1. 2. for long term performance with minimal light output degradation, drive currents between 10 ma and 30 ma are recommended. for more information on recommended drive conditions, please refer to application brief i-024 (5966-3087e). 3. operating at currents below 1 ma is not recommended. please contact your local representative for further information. bin name min. [2] max. [2] t 18.000 25.000 u 25.001 36.000 notes: 1. bin categories are established for classification of products. products may not be available in all bin categories. 2. tolerance for each bin limit is 10%. optical/electrical characteristics at t a = 25?c device series hdsp- parameter symbol min. typ. max. units test conditions 561c forward voltage i v 1.90 2.40 v i f = 20 ma 563c reverse voltage v r 5vi f = 100 a peak wavelength peak 635 nm peak wavelength of spectral distribution at i f = 20 ma dominant wavelength [3] d 622.5 626 630 nm spectral halfwidth ? 1/2 40 nm wavelength width at spectral distribution 1/2 power point at i f = 20 ma speed of response s 20 ns exponential time constant, e -t s capacitance c 40 pf v f = 0, f = 1 mhz intensity bin limits [1] (mcd at 10 ma)
5 contrast enhancement for information on contrast enhancement, please see application note 1015. soldering/cleaning cleaning agents from ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning led parts. all of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic led parts. for information on soldering leds, please refer to application note 1027. figure 1. maximum forward current vs. ambient temperature. derating based on t jmax = 130?c. figure 2. forward current vs. forwrad voltage. i f forward current per segment ma 0.0 0 v f forward voltage v 120 60 2.0 3.0 80 20 1.0 2.5 40 1.5 100 i f maximum average current ma 0 0 t a ambient temperature ? c 60 30 120 40 10 20 20 40 50 60 80 100 figure 3. relative luminous intensity vs. dc forward current. figure 4. relative efficiency (luminous intensity per unit current) vs. peak current. relative luminous intensity (normalized to 1 at 10 ma) 0 0 i f forward current per segment ma 3.5 3.0 1.5 1.0 40 20 60 10 30 50 2.5 2.0 0.5 relative efficiency (normalized to 1 at 10 ma) 0 010203040 60 i peak peak forward current per segment ma 0.2 0.4 0.6 0.8 1.0 1.4 1.2 50
for product information and a complete list of distributors, please go to our website: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies limited in the united states and other countries . data subject to change. copyright ? 2006 avago technologies limited. all rights reserved. 5988-4823en may 31, 2006
|
