ps7214-1a nec's 4-pin sop 1.0 on-state resistance 1-ch optical coupled mos fet california eastern laboratories ? low on-state resistance : r o n = 1.0 typ. ? large continuous load current : i l = 400 ma ? 1 channel type: 1 a output ? design for ac/dc switching line changer ? small and thin package: 4-pin sop, height= 2.1 mm ? high isolation voltage: bv = 1500 vr.m.s. ? low offset voltage ? ordering number of taping product: ps7214-1a-e3, e4, f3, f4 features data sheet nec's ps7214-1a is a low on-state resistance solid state relay containing a gaas led on the input side and mos fets on the output side. it is suitable for plc, etc. because of its large continu - ous load current and low on-state resistance. description ? measurement equipment ? fa equipment application
ps7214-1a package dimensions (unit: mm) 4 3 1 2 top view 4.4 7.00.3 0.50.3 0.15 +0.10 -0.0 5 2.54 4.00.5 0.05 +0.08 -0.0 5 2.05 +0.08 -0.0 5 0.40 +0.10 -0.0 5 0.25 m 1. led anode 2. led cathode 3. mos fet 4. mos fet
ps7214-1a ordering information absolute maximum ratings ( t a = 25oc, unless otherwise speci?ed ) *1 pw = 100 s, duty cycle = 1 % *2 pw = 100 ms, 1 shot *3 ac voltage for 1 minute at t a = 25 c, rh = 60 % between input and output part number package packing style application part number *1 ps7214-1a 4-pin sop magazine case 100 pcs ps7214-1a ps7214-1a-e3 embossed tape 900 pcs/reel PS7214-1A-E4 ps7214-1a-f3 embossed tape 3 500 pcs/reel ps7214-1a-f4 *1 for the application of the safety standard, following part number should be used. parameter symbol ratings unit diode forward current (dc) i f 50 ma reverse voltage v r 5.0 v power dissipation p d 50 mw peak forward current *1 i fp 1 a mos fet break down voltage v l 100 v continuous load current i l 400 ma pulse load current *2 (ac/dc connection) i lp 0.8 a power dissipation p d 300 mw isolation voltage *3 bv 1 500 vr.m.s. total power dissipation p t 350 mw operating ambient temperature t a ? 40 to +85 c storage temperature t stg ? 40 to +100 c
ps7214-1a electrical characteristics ( t a = 2 5 oc ) recommended operating conditions ( t a = 25oc ) parameter symbol min. typ. max. unit led operating current i f 2 10 20 ma led off voltage v f 0 0.5 v parameter symbol conditions min. typ. max. unit diode forward voltage v f i f = 10 ma 1.2 1.4 v reverse current i r v r = 5 v 5.0 a mos fet off-state leakage current i loff v d = 100 v 1.0 a output capacitance c out v d = 0 v, f = 1 mhz 120 pf coupled led on-state current i fon i l = 400 ma 2.0 ma on-state resistance r on i f = 10 ma, i l = 400 ma, t 10 ms 1.0 1.2 turn-on time *1 t on i f = 10 ma, v o = 5 v, r l = 500 , 1.3 2.0 ms turn-off time *1 t off pw 10 ms 0.1 1.0 isolation resistance r i-o v i-o = 1.0 kv dc 10 9 isolation capacitance c i-o v = 0 v, f = 1 mhz 0.5 pf *1 test circuit for switching time v l r l i f r in pulse input input monitor monitor v o t on t of f 10 % 90 % 0 v o = 5 v 50 % output input
ps7214-1a typical characteristics ( t a = 25oc, unless otherwise speci?ed ) 100 85 75 50 25 0 -25 20 60 80 100 40 0 maximum forward current i f (ma) ambient t emperature t a (oc) maximum for w ard current vs. ambient tempera ture output cap acit ance vs. output capacitance c out (pf) applied v oltage v d (v) maximum load current i l (ma) ambient t emperature t a (oc) maximum load current vs. ambient tempera ture applied vol ta ge i f = 50 ma 30 ma 20 ma 10 ma 5 ma 1 ma 100 0 -25 25 50 75 1.0 1.4 1.6 1.8 1.2 0.8 forward v oltage v f (v) of f-state leakage current i lof f (a) ambient t emperature t a (oc) ambient t emperature t a (oc) ambient tempera ture for w ard vol t age vs. 100 85 75 0 -25 50 25 400 600 200 0 load current vs. load vol ta ge load current i l (ma) load v oltage v l (v) off-st a te leakage current vs. ambient tempera ture f = 1 mhz 10 20 30 40 50 60 200 0 150 100 50 -0.8 -0.4 0.8 0.4 -200 -600 -400 200 600 400 i f = 10 ma, i l = 400 ma 0 10 -6 10 -1 1 10 -8 10 -7 10 -9 10 -1 0 0 20 40 60 8 0 v d = 100 v
ps7214-1a normalized to 1.0 at t a = 25 oc, i f = 10 ma, i l = 400 ma normalized on-state resistance r on ambient t emperature t a (oc) normalized on-st a te resist ance vs. ambient tempera ture on-st a te resist ance distribution number (pcs) on-state resistance r on ( ? ) n = 50 pcs, i f = 10 ma, v o = 5 v, r l = 500 ? n = 50 pcs, i f = 10 ma, v o = 5 v, r l = 500 ? number (pcs) t urn-off t ime t of f (ms) turn-off time distribution number (pcs) t urn-on t ime t on (ms) turn-on time distribution t urn-on t ime t on (ms) forward current i f (ma) turn-on time vs. for w ard current t urn-off t ime t of f (ms) forward current i f (ma) turn-off time vs. for w ard current v o = 5 v, r l = 500 ? v o = 5 v, r l = 500 ? 0.5 1.5 2.0 3. 0 1.0 2.5 0.0 100 75 50 25 -25 0 0.8 1.0 1.2 0 5 10 15 20 25 30 30 25 20 15 10 5 1.0 3. 0 4.0 6. 0 2.0 5.0 0 30 25 20 15 10 5 0.05 0.15 0.20 0.30 0.10 0.25 0 0.08 0.12 0 5 10 15 20 25 30 1.3 1.5 0 5 10 15 20 25 30 n = 50 pcs, i f = 10 ma, i l = 400 ma, t 10 ms
ps7214-1a normalized to 1.0 at t a = 25 oc, i f = 10 ma, v o = 5 v, r l = 500 ? normalized to 1.0 at t a = 25 oc, i f = 10 ma, v o = 5 v, r l = 500 ? normalized t urn-on t ime t on ambient te mperature t a ( o c) normalized turn-on time vs. ambient temperat ure normalized tu rn-of f t ime t of f ambient te mperature t a ( o c) normalized turn-off time vs. ambient tempera ture 100 0 -25 25 50 75 2.5 3. 0 0.0 2.0 1.5 1.0 0.5 100 0 -25 25 50 75 2.5 3. 0 0.0 2.0 1.5 1.0 0.5 remark the graphs indicate nominal characteristics.
ps7214-1a taping specifications ( units in mm ) ps7214-1a-e3 PS7214-1A-E4 ta pe direction outline and dimensions (t ape) 1.550.1 2.00.05 4.00.1 1.750.1 4.60.1 2.9 max. 0.3 8.00.1 2.40.1 1.5 +0. 1 -0 7.40.1 5.50.05 12.00.2 outline and dimensions (reel) packing: 900 pcs/reel 2.00.5 r 1.0 13.00.2 21.00.8 2.0 0.5 11 .9 to 15.4 outer edge of flange 17.51.0 13.51.0 180 +0 -1.5 +1 -0 60
ps7214-1a ps7214-1a-f3 ps7214-1a-f4 tape direction outline and dimensions (t ape) 1.550.1 2.00.05 4.00.1 1.750.1 4.60.1 2.9 max. 0.3 8.00.1 2.40.1 1.5 +0. 1 -0 7.40.1 5.50.05 12.00.2 outline and dimensions (reel) packing: 3 500 pcs/reel 2.00.5 r 1.0 13.00.2 21.00.8 3302.0 1001.0 2.0 0.5 11 .9 to 15.4 outer edge of flange 17.51.0 13.51.0 13.00.2
ps7214-1a recommended soldering conditions (1) infrared re?ow soldering ? peak re?ow temperature 260 c or below (package surface temperature) ? time of peak re?ow temperature 10 seconds or less ? time of temperature higher than 220 c 60 seconds or less ? time to preheat temperature from 120 to 180 c 120 30 s ? number of re?ows three ? flux rosin ?ux containing small amount of chlorine (the ?ux with a maximum chlorine content of 0.2 wt% is recommended.) (2) wave soldering ? temperature 260 c or below (molten solder temperature) ? time 10 seconds or less ? preheating conditions 120 c or below (package surface temperature) ? number of times one ? flux rosin ?ux containing small amount of chlorine (the ?ux with a maximum chlorine content of 0.2 wt% is recommended.) (3) cautions ? fluxes avoid removing the residual ?ux with freon-based and chlorine-based cleaning solvent. 220oc package surface t emperature t (oc) t ime (s) (heating) to 10 s to 60 s 260oc max. recommended temperature profile of infrared reflow 12030 s (preheating) 180oc 120oc life support applications these nec products are not intended for use in life support devices, appliances, or systems where the malfunction of these prod ucts can reasonably be expected to result in personal injury . the customers of cel using or selling these products for use in such applications do so at their own risk and agree to fully indemnify cel for all damages resulting from such improper use or sale. a business partner of nec compound semiconductor devices, ltd. 04/18/2005
|
