1 technical data sheet sma male connector clamp/solder attachment for rg178, rg196 confguration connector sma male connector interface type rg178,rg196 cable attachment method (shield/contact) clamp/solder body style straight electrical specifcations impedance, ohms 50 mechanical specifcations size length, in [mm] 0.728 [18.49] width/dia., in [mm] 0.312 [7.92] . weight, lbs [g] 0.013 [5.9] connector type sma male contact material and plating gold coupling nut material and plating brass, nickel hex size, in. 5/16 torque, in-lbs [nm] 5 [0.57] body material and plating brass, nickel dielectric type ptfe compliance certifcations (visit www.pasternack.com for current document) plotted and other data notes: v alues at 25 c, sea level sma male connector clamp/solder attachment for rg178, rg196 from pasternack enterprises has same day shipment for domestic and international orders. our rf, microwave and fber optic products maintain a 99% availability and are part of the broadest selection in the industry. click the following link (or enter part number in search on website) to obtain additional part information including price, inventory and certifcations: sma male connector clamp/solder attachment for rg178, rg196 PE4214 url: http://www.pasternack.com/sma-male-standard-rg178-rg196-connector-PE4214-p.aspx PE4214 PE4214 rev 01 sma male connector clamp/solder attachment for rg178, rg196
? 2013 pasternack enterprises all rights reserved 2 PE4214 rev 01 scale n/a dwg title cad file 127 fscm no. 53919 rev. a 090308 size a PE4214 notes: 1. unless otherwise specified all dimensions are nominal. 2. all specifications are subject to change without notice at any time. 3. dimensions are in inches [mm]. 4. fits mil-c-17 and equivalent cables. 1. slide clamp nut over cable. strip cable as shown. 2. flare braid and slide contact assembly over dielectric and under braid until the contact assembly stops. trim excess braid to diameter of the contact assembly. 3. solder contact onto center conductor. insert assembly into body and tighten. assembly procedures sma male connector clamp/solder attachment for rg178, rg196 PE4214 cad drawing
|
