pre-amplified 5v excitation gauge xfgn data sheet 1 features on-chip amplification and temperature compensations pre-calibration of offset voltage and span surface mount package ordering information weight (grams) 0.35 measurable pressure range(kpa) part number 0 to -24.5 xfgn-603pgvsr 0 to -100 xfgn-6100kpgvsr 0 to 25 xfgn-6025kpgsr 0 to 50 xfgn-6050kpgsr 0 to 100 xfgn-6100kpgsr 0 to 200 xfgn-6200kpgsr specifications model 603pgv 6100kpgv 6025kpg 6050kpg 6100kpg 6200kpg unit recommended operating conditions pressure type gauge pressure - rated pressure -24.5 -100 25 50 100 200 kpa measurable pressure range 0 to -24.5 0 to -100 0 to 25 0 to 50 0 to 100 0 to 200 kpa temperature range 0 to 50 deg.c pressure media non-corrosive gases only (no liquid) - excitation current (constant) 5+/-0.25 vdc absolute maximum rating maximum load pressure twice of rated pressure - maximum excitation voltage 8 vdc operating temperature -10 to 80 deg.c storage temperature -20 to 100 deg.c operating humidity 30 to 80 (non dew condition) %rh electrical characteristics (excitation voltage vcc= 5.0v constant ,ambient temperature ta=25deg.c) power consumption 10ma max. ma output impedance 10 ? max. ? source current 0.2ma max. ma sink current 2ma max. ma response time 2 (for the reference) msec. output span voltage 4.0 v offset voltage * 0.5v(at 0kpa) +/-0.1v(25deg.c) , +/-0.2v(0 to 50deg.c) v output voltage at full scale * 4.5v(at rated pressure) +/-0.1v(25deg.c) , +/-0.2v(0 to 50deg.c) v accuracy * +/-5.0 %fs/0-50deg.c rohs compliance model length of the pressure port rated pressure (kpa) terminal leads configuration surface mount package 6 6mm pressure type gv gauge pressure(negative pressure) g gauge(positive pressure) * excluding input voltage error.
pre-amplified 5v excitation gauge xfgn data sheet 2 outline dimensions connection diagram view from lavel marking 2-1.1 xfgn
pre-amplified 5v excitation gauge xfgn data sheet 3 transfer function vout = vs( p + ) (pressure errortemperature error multiplier vs) vs=vcc=5.0v p=input pressure(kpa) model measurable pressure range(kpa) pressure error (kpa) xfgn-603pgvsr 0 to -24.5 -0.03266 0.1 0.612 xfgn-6100kpgvsr 0 to -100 -0.008 0.1 2.5 xfgn-6025kpgsr 0 to 25 0.032 0.1 0.625 xfgn-6050kpgsr 0 to 50 0.016 0.1 1.25 xfgn-6100kpgsr 0 to 100 0.008 0.1 2.5 xfgn-6200kpgsr 0 to 200 0.004 0.1 5 temperature error multiplier output characteristics note ; please read instruction ?notes? before using the sensor. fujikura reserves the right to c hange specifications without notice. please keep the sensors sealed using static shielding b ags on storage.the pins of t he sensor are plated by ag. if the sensors expose to an atmosphere, th e pins will be black by sulfuration. please set zero-calibration function up your products. the offset voltage may be shifted some mechanical stress such as mounting, installation and etc. over longtime using. output voltage mv rated pressure pressure atomospheric pressure
pre-amplified 5v excitation gauge xfgn data sheet 4 reflow soldering process recommendation profile a: rump up rate 1 or 2 deg.c/sec. b: pre-heating 150 to 180 deg.c,within 60 to120sec. c: rump up rate 1 to 2 deg.c/sec. d: heating max.230 deg.c,max.10sec. 210 deg.c,within 30sec. e: rump down rate 1 or 2 deg.c/sec. note ; 1 ) temperatur e means surface temperatur e of the sensor package. 2 ) reflow process max. 2 times. 3 ) do not wash the sensor. 4 ) do not put the solder and fl ux on the sensor package. if you have any questions regarding technical issues or specifications, please contact us. fujikura ltd. sensor department 5-1 kiba 1-chome, koto-ku, tokyo 135-8512, japan phone +81-(0)3-5606-1072 e-mail : sensor@fujikura.co.jp package surface temperature (degree c) 210 150 room te m p . a b c d e 230 time
|
