saronix tcxo / tcvcxo technical data ds-167 rev c01 s5300 series 5v, clipped sinewave, hcmos, ttl frequency range: frequency stability: vs. temperature: 2.0 (0 to +55c), 2.5, 3.0 or 5.0 ppm max vs. aging: 2.0 ppm (85c, 1000 hrs) vs. supply voltage: 0.3 ppm (5v 5%) vs. load: 0.2 ppm (10 pf to 20pf) vs. hysteresis: 0.5 ppm (temp change 1c per minute) vs. temp cycle: 0.2 ppm (10 cycles, min to max storage temp) perturbations: 0.5 ppm peak-to-peak max 8.4672 mhz to 34.3680 mhz description a temperature compensated crystal os- cillator available for 5 volt operations with clipped sinewave, hcmos and ttl output. the low power consumption of this tcxo makes it ideal for portable, wireless applications. the tcxo version comes in a 3 pin package and the tcvcxo version in a 4 pin package. actual size applications & features cellular applications (gsm, tdma, cdma) gps devices mobile and portable radio/telephone communications transceivers temperature range: operating: storage: 0 to +55c, -10 to +60c or -20 to +70c -40 to +85c supply voltage: 5v 5% supply current: 5ma max (clipped sinewave) 15ma max (hcmos and ttl) 1.0v peak-to-peak min 20k ? // 10pf output: frequency adjustment 5ppm min relative to nominal frequency (using externally accessible, internal trimmer) +0.5v to +4.5vdc 5ppm min (vc = 2.5v 2v) 1 m ? min 1 khz min mechanical: shock: solderability: vibration: solvent resistance: resistance to soldering heat: mil-std-883, method 2002, condition b mil-std-883, method 2003 mil-std-883, method 2007, condition a mil-std-202, method 215 mil-std-202, method 210, condition b environmental: thermal shock: mil-std-883, method 1011, condition a saronix 141 jefferson drive menlo park, ca 94025 usa 650-470-7700 800-227-8974 650-462-9894 clipped sinewave level: load: rated control voltage: relative pull range: control v input impedance: modulation bandwidth: phase noise (typical): -45 dbc/hz min @ 1 hz offset from carrier -80 dbc/hz min @ 10 hz -110 dbc/hz min @ 100 hz -142 dbc/hz min @ 1 khz -150 dbc/hz min @ 10 khz -155 dbc/hz min @ 100 khz -120 dbc/hz min @ 1 khz offset from carrier -140 dbc/hz min @ 10 khz -150 dbc/hz min @ 100 khz ttlcompatible symmetry: rise & fall times: logic 0: logic 1: load: 40/60% max @ 1.5v 4ns max, 0.5v to 2.5v 0.5v max 2.5v min 2ttl or 15pf hcmos compatible symmetry: rise & fall times: logic 0: logic 1: load: 40/60% max @ 50% v dd 8ns max, 20% to 80% v dd 10% max 90% min 15pf clipped sinewave hcmos or ttl
all specifications are subject to change without notice. ds-167 rev c01 s5300 series saronix tcxo / tcvcxo technical data 5v, clipped sinewave, hcmos, ttl package details test circuit power supply oscillator pin 7 pin 8 pin 14 v m ma m 0.1f gnd v cc out c l= 15pf (note a:) test point 18.50.3 .728.012 marking 11.80.3 .465.012 4.00 .157 5.01.0 .197.039 2.5 .098 max 1.0 .039 .45 .018 15.20.3 .598.012 7.60.3 .299.012 pin 14 pin 8 pin 7 pin functions tcxo: pin 7: gnd pin 8: output pin 14: v cc 6.5 .250 max scale: none (dimensions in ) mm inches saronix 141 jefferson drive ? menlo park, ca 94025 usa 650-470-7700 800-227-8974 fax 650-462-9894 pin 1 on tcvcxo only pin functions tcvcxo: pin 1: v control pin 7: gnd pin 8: output pin 14: v cc package size 3 = 18.5 x 12 x 6.5 part numbering guide s 5 3 6 8 l s v - 10.0000 saronix supply voltage 5 = 5v package type l = through hole operating temperature 1 = 0 to +55c 4 = -20 to +70c 8 = -10 to +60c frequency temperature stability 5 = 2.0 ppm max, 0 to +55c only 6 = 2.5 ppm max 7 = 3.0 ppm max 9 = 5.0 ppm max blank = tcxo, with 3 pins v = tcvcxo, with 4 pins power supply oscillator pin 7 pin 8 pin 14 v m ma m 0.1f gnd v cc out c l= 15pf (note a:) test point ttl test circuit note a: c l includes probe and fixture capacitance. 2k (bottom view) hcmos test circuit note a: c l includes probe and fixture capacitance. output s = clipped sinewave t = ttl h = hcmos frequency (mhz)
|
