p. 70, p. 100, p. 140, p. 200 www.vishay.com vishay draloric revision: 01-mar-13 1 document number: 22082 for technical questions, contact: powcap@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 rf power plate capacitors with contoured rim, class 1 ceramic features ? low losses ? high reliability ? wide range of capacitance values applications ? induction and dielectric heating ? antenna units ? filter, bypass an d coupling circuits material capacitor elements made from class 1 ceramic dielectric with noble metal electrodes. flexible connection termina ls made from copper/brass, silver plated, to allow for seri es and parallel interconnection finish noble metal electrodes and terminals are protective lacquered. the contoured insu lating rim is additionally glazed marking type designator, capacitance value and tolerance, rated peak voltage, ceramic material code, production date code, manufacturer logo. accessories added two screws and washers (pd, pe) capacitance range 25 pf to 6.0 nf capacitance tolerance ? 10 pf: 2 pf; 1 pf; 0.5 pf ? 10 pf: 20 %; 10 %; 5 % ceramic dielectric ? r7 (tcc + 100 ppm/k) ? r16 (tcc + 100 ppm/k) ? r42 (tcc - 250 ppm/k) ? r85 (tcc - 750 ppm/k) ? r230 (tcc - 750 ppm/k) rated voltage ?11 kv p ?12 kv p ?13 kv p ?14 kv p ?15 kv p ?16 kv p dielectric strength test 200 % of rated voltage, 50 hz dissipation factor r7: max. 0.07 % r16: max. 0.04 % r42, r85, r230: max. 0.05 % measuring frequencies: 1 mhz (< 1 nf); 300 khz or 100 khz ( ? 1 nf) insulation resistance min. 10 000 m ? (at 25 c) operating temperature range - 55 c to + 100 c quick reference data description value ceramic class 1 ceramic dielectric r7, r16, r42, r85, r230 type pa 70, pc 70, pd 70 pa 100, pc 100, pd 100, pe 100 pa140, pc140, pd140, pe140 pa 200, pc 200, pd 200, pe 200 voltage (v p ) 11 000 12 000 13 000 14 000 11 000 13 000 15 000 16 000 12 000 13 000 14 000 15 000 16 000 12 000 13 000 14 000 15 000 min. capacitance (pf) 800 80 120 25 1600 160 250 50 3000 600 300 100 3000 400 4000 300 160 max. capacitance (pf) 800 600 500 300 1600 1200 800 200 3000 2500 1600 400 3000 6000 5000 3000 800 mounting screw terminal/band terminal
p. 70, p. 100, p. 140, p. 200 www.vishay.com vishay draloric revision: 01-mar-13 2 document number: 22082 for technical questions, contact: powcap@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? # 2 nd digit: code letter of term inal version a, c, d, e ? ## 14 th to 15 th digit: capacitance tolerance code 20 % = 38; 10 % = 36; 5 % = 33 (1) the surface temperature during op eration must not exceed + 100 c sap part number and electrical data part number ceramic cap. values (pf) rated voltage (kv p ) rated power (1) (kvar) rated current (a rms ) pd pa, pc type p. 70 p#0070wj250##bf1 r7 25 14 15 16 10 p#0070wj300##bf1 30 p#0070wj400##bg1 r16 40 14 20 p#0070wj500##bg1 50 p#0070wj600##bg1 60 p#0070wf800##bg1 80 12 p#0070wj101##bh1 r42 100 14 20 p#0070wh121##bh1 120 13 p#0070wh161##bh1 160 p#0070wj201##bj1 r85 200 14 20 p#0070wj251##bj1 250 p#0070wj301##bj1 300 p#0070wh401##bj1 400 13 p#0070wh501##bj1 500 p#0070wf601##bj1 600 12 p#0070we801##bj1 800 11 sap part number and electrical data part number ceramic cap. values (pf) rated voltage (kv p ) rated power (1) (kvar) rated current (a rms ) pe pd pa, pc type p. 100 p#0100bj500##bf1 r7 50 15 30 35 25 15 p#0100bj600##bf1 60 p#0100bj800##bg1 r16 80 15 40 p#0100bj101##bg1 100 p#0100bj121##bg1 120 p#0100wh161##bg1 160 13 p#0100bj201##bh1 r42 200 15 40 p#0100wj251##bh1 250 14 p#0100wh301##bh1 300 13 p#0100wj401##bj1 r85 400 14 40 p#0100wj501##bj1 500 p#0100wj601##bj1 600 p#0100wj801##bj1 800 p#0100wh102##bj1 1000 13 p#0100wh122##bj1 1200 p#0100we162##bj1 1600 11
p. 70, p. 100, p. 140, p. 200 www.vishay.com vishay draloric revision: 01-mar-13 3 document number: 22082 for technical questions, contact: powcap@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? # 2 nd digit: code letter of term inal version a, c, d, e ? ## 14 th to 15 th digit: capacitanc e tolerance code 20 % = 38; 10 % = 36; 5 % = 33 (1) the surface temperature during operation must not exceed + 100 c (2) only pe type available sap part number and electrical data part number ceramic cap. values (pf) rated voltage (kv p ) rated power (1) (kvar) rated current (a rms ) pe pd pa, pc type p. 140 p#0140bj101##bf1 r7 100 15 67.5 45 30 20 p#0140bj121##bf1 120 p#0140bj161##bg1 r16 160 15 90 p#0140bj201##bg1 200 p#0140bj251##bg1 250 p#0140wj301##bg1 300 14 p#0140bj401##bh1 r42 400 15 90 p#0140wj501##bh1 500 14 p#0140wh601##bh1 600 13 p#0140wh801##bh1 800 p#0140wj102##bj1 r85 1000 14 90 p#0140wj122##bj1 1200 p#0140wj162##bj1 1600 p#0140wh202##bj1 2000 13 p#0140wh252##bj1 2500 p#0140wf302##bj1 3000 12 p#0140wl302##bk1 r230 3000 16 90 45 (2) (2) sap part number and electrical data part number ceramic cap. values (pf) rated voltage (kv p ) rated power (1) (kvar) rated current (a rms ) pe pd pa, pc type p. 200 p#0200bj161##bf1 r7 160 15 112 60 40 25 p#0200bj201##bf1 200 p#0200bj251##bf1 250 p#0200wj301##bf1 300 14 p#0200wf401##bf1 400 12 p#0200bj501##bg1 r16 500 15 150 p#0200bj601##bg1 600 p#0200bj801##bh1 r42 800 15 150 p#0200wj102##bh1 1000 14 p#0200wj122##bh1 1200 p#0200wj162##bh1 1600 p#0200wj202##bj1 r85 2000 14 150 p#0200wj252##bj1 2500 p#0200wj302##bj1 3000 p#0200wh402##bj1 4000 13 p#0200wh502##bj1 5000 p#0200wf602##bj1 6000 12
p. 70, p. 100, p. 140, p. 200 www.vishay.com vishay draloric revision: 01-mar-13 4 document number: 22082 for technical questions, contact: powcap@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) dimension w 2 will vary dependin g upon capacitance (2) type pe 70 is not available dimensions in millimeters (inches) type pa 70 pc 70 pd 70 (2) pa 100 pc 100 pd 100 pe 100 pa 140 pc 140 pd 140 pe 140 pa 200 pc 200 pd 200 pe 200 diameter d max. 70 (2.76) 100 (3.52) 140 (5.51) 200 (7.87) thread size m6 m8 m8 m10 width w 1 35 1 (1.38 0.04) 40 1 (1.58 0.04) 40 1 (1.58 0.04) 45 1 (1.77 0.04) width w 2 (1) 30 (1.81) 30 (1.81) 30 (1.81) 32 (1.26) height h 116 (4.57) 146 (5.75) 186 (7.32) 246 (9.69) length l 1 100 (3.94) 140 (5.51) 140 (5.51) 200 (7.87) length l 2 15 (0.59) 30 (1.18) 30 (1.18) 30 (1.18) thread s ize thread s ize pd 3 finger terminal s w 1 w 1 pc pa pe h d w 2 l 1 l 2 6 finger terminal s band terminal s band terminal s and ceramic ba s e not available a s pe 70 30 1 (1.18 0.04) 50 (1.97) 5.0 (0.2) 10 (0.39) 0.3 (0.012) 13 (0.51) 85 (3.35) 6.4 + 0.4 (0.25 + 0.02) 66 2 (2.60 0.08)
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
