type: ls?11s article no.: 266105 sales text plunger,snap?action contact basic unit ordering information description expandable with operating heads auxiliary contacts: = safety function, by positive opening to iec/en 60947?5?1 n/o = normally open 1 n/o n/c = normally closed 1 n/c function snap?action contact housing insulated material terminal connection cage clamp contact sequence contact diagram 1
colour of enclosure cover note concerning the product en 50047 form b notes concerning the table header contact travel = contact closed = contact open = setting range notes concerning the product group cage clamp is a registered trademark of wago kontakttechnik, 32432 minden, germany. general standards iec/en 60947 climatic proofing damp heat, constant, to iec 60068?2?78; damp heat, cyclical, to iec 60068?2?30 ambient temperature c ... 25...+70 mounting position as required protection type ip66, ip67 terminal capacity of screw terminal and cage clamp solid mm 2 1 (0.5 C 2.5) flexible with ferrules to din 46228 mm 2 1 (0.5 C 1.5) contacts/switching capacity rated impulse withstand voltage u imp v ac 4000 rated insulation voltage u i v 400 2
overvoltage category/pollution degree iii/3 rated operational current acC15 24 v i e a 6 230 v/240 v i e a 6 400 v/415 v i e a 4 dc?13 24 v i e a 3 110 v i e a 0,8 220 v i e a 0,3 control circuit reliability at 24 v dc/5 ma h f fault probability < 10 ?7 , < 1 fault in 107 operations at 5 v dc/1 ma h f fault probability < 10 ?6 , < 1 failure at 5 10 6 operations supply frequency hz max. 400 short?circuit rating to iec/en 60947?5?1 max. fuse a gg/gl 6 repetition accuracy mm 0,02 mechanical variables lifespan standard?action contact operations 10 6 8 snap?action contact operations 10 6 8 contact temperature of roller head c 100 mechanical shock resistance (half?sinusoidal shock, 20 ms) standard?action contact g 25 operating frequency operations/h 6000 actuation mechanical actuating force at beginning/end of stroke basic units n 1.0/8.0 ls(m)?xp n 1.0/8.0 ls(m)?xl n 1.0/8.0 ls(m)?xla n 1.0/8.0 actuating torque of rotary drives nm 0,2 3
max. operating speed with din cam basic units for angle of actuation = 0/30 m/s 1/0.5 ls(m)?xrl for angle of actuation = 0 m/s 1,5 ls(m)?xrla for angle of actuation = 30, l = 125 mm m/s 1,5 ls(m)?xrr for l = 130 mm m/s 1,5 ls(m)?xl for angle of actuation = 30/45 m/s 1 ls(m)?xla for angle of actuation = 30/45 m/s 1 ls(m)?xp for angle of actuation = 0/30 m/s 1/1 notes notes cage clamp is a registered trademark of wago kontakttechnik, 32423 minden, germany. accessories for the cage clamp terminals from wago: jumper insert, grey, wago article no. 264?402 tightening torque of cover screws: 0.8 nm 0.2 nm only with ls (insulated version) fixing screws 2 x m4 30 m a = 1.5 nm dimensions moeller gmbh, hein?moeller?str. 7?11, d?53115 bonn e?mail: catalog@moeller.net, internet: www.moeller.net, http://catalog.moeller.net copyright 2006 by moeller gmbh. hpl?c2007g v2.1 4
|