View FG050605DNSWBG01_7300604.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

confidential document FG050605DNSWBG01 rev:1 page: 1 /15 data image corporation tft module specification preliminary item no.: FG050605DNSWBG01 table of contents 1. cover & contents ??????????????????????????????????????????????? 1 2. record of revision ????????????????????????????????????????????? 2 3. application ??????????????????????????????????????????????????????????? 3 4. general specifications ??????????????????????????????????????? 3 5. electrical characteristics ?????????????????????????????? 3 6. block diagram ????????????????????????????????????????????????????? 4 7. pin connections ???????????????????????????????????????????????????? 5 8. interface specifications ???????????????????????????????????? 6 9. optical characteristic ?????????????????????????????????????? 9 10. quality assurance ???????????????????????????????????????????? 11 11. lot numbering system ?????????????????????????????????????? 12 12. lcm numbering system ???????????????????????????????????????? 12 13. precautions in use lcm ??????????????????????????????????????? 13 14. outline drawing ??????????????????????????????????????????????????? 14 15. package information ?????????????????????????????????????????? 15 customer companies r&d dept. q.c. dept. eng. dept. prod. dept. alex eric paul helen approved by version: issued date: sheet code: total pages: 1 2006/5/2 15 free datasheet http:///
confidential document FG050605DNSWBG01 rev:1 page: 2 /15 2. record of revision rev date item page comment 1 2/may/06 initial preliminary free datasheet http:///
confidential document FG050605DNSWBG01 rev:1 page: 3 /15 3. application digital equipments which need color display, such as p.o.s, medical equipments and industrial equipments. 4. general specifications parameter specifications unit display resolution 960(w) x 234(h) dot active area 113.28(w) x 84.708(h) mm screen size 5.6(diagonal) inch dot pitch 0.118(w) x 0.362(h) mm color configuration r.g.b. stripe overall dimension 126.5(w) x 100(h) x 11.1(d) mm weight 160 g surface treatment anti-glare(haze=6% typical) view angle direction 6 o?clock our components and processes are compliant to rohs standard 5. electrical characteristics ta=25 c parameter symbol min. typ. max. unit remark power supply voltage v cc +3.0 +3.3 +3.6 v power supply current i cc 150 200 ma v cc =3.3v ?h? level logical input voltage v ih 0.7vcc -- -- v ?l? level logical input voltage v il -- -- 0.3vcc v operating temperature topa (-30) -- (80) c ambient temperature storage temperature tstg (-30) -- (80) c ambient temperature 5.1 backlight driving for power consumption ta= 25 c parameter symbol min. typ. max. unit remark vled voltage v l 4.5 5.0 5.5 v led current i l -- 320 -- ma led life time decay to 50% 20000 30000 -- hr free datasheet http:///
confidential document FG050605DNSWBG01 rev:1 page: 4 /15 6. block diagram backlight unit v led gled tft-lcd panel (320xr,g,bx234) dots data driver ic dc/dc converter & reference voltage generator timing control asic input connector scan driver ic ttl 562 control board tft display hs v s clk1 de r0~r5 g0~g5 b0~b5 v cc gnd free datasheet http:///
confidential document FG050605DNSWBG01 rev:1 page: 5 /15 7. pin connections 7.1 p1 input pins connection ( to ttl562 control board ) pin no symbol function remark 1 gnd ground for logic circuit 2 clk1 data sampling clock 3 hs (hsync) horizontal synchronous signal 4 vs (vsync) vertical synchronous signal 5 gnd ground for logic circuit 6 r0 red pixel data(lsb) 7 r1 red pixel data 8 r2 red pixel data 9 r3 red pixel data 10 r4 red pixel data 11 r5 red pixel data(msb) 12 gnd ground for logic circuit 13 g0 green pixel data(lsb) 14 g1 green pixel data 15 g2 green pixel data 16 g3 green pixel data 17 g4 green pixel data 18 g5 green pixel data(msb) 19 gnd ground for logic circuit 20 b0 blue pixel data(lsb) 21 b1 blue pixel data 22 b2 blue pixel data 23 b3 blue pixel data 24 b4 blue pixel data 25 b5 blue pixel data(msb) 26 gnd ground for logic circuit 27 de data enable (connected to gnd, if sync mode) 28 vcc power supply : +3.3v 29 vcc power supply : +3.3v 30 nc no connection 31 nc no connection 32 gnd ground for logic circuit free datasheet http:///
confidential document FG050605DNSWBG01 rev:1 page: 6 /15 8. interface specifications 8.1 input signal timing specifications the specification of input signals timing is as the following table and timing diagram. signal parameter symbol min. typ. max. unit remarks pixel clock frequency fclk1 6.25 mhz pixel clock period tck 160 ns rise time trck 6 ns clk1 fall time tfck 6 ns vertical frequency fv 59 hz vertical period tvp 259 thp vertical display blank period tvdb 25 thp vertical display active period tvda 234 thp vertical sync. front porch vfp 6 thp vertical sync. back porch vbp 6 thp vs vertical sync. pulse width vpw 13 thp horizontal period thp 408 tclk1 horizontal display blank period thdb 88 tclk1 horizontal display active period thda 320 tclk1 horizontal sync. front porch hfp 36 tclk1 horizontal sync. back porch hbp 36 tclk1 hs horizontal sync. pulse width hpw 16 tclk1 setup time tsd 10 ns data r,g,b hold time thd 10 ns note: 1.data is latched at falling edge of clk1 in the spec. clk1 should appear during all blanking period. 2.vs and hs are negative polarity in the spec. 3.hs should appear during blanking period of frame cycle. 4.tvp=tvdb+tvda, tvdb=vbp+vfp+vpw 5.thp=thdb+thda, thdb=hbp+hfp+hpw free datasheet http:///
confidential document FG050605DNSWBG01 rev:1 page: 7 /15 8.2 power off/on sequence timing 234 234 1 2 vsync hsync de tvdb tvda vpw tvp vbp vfp hpw hbp thp hfp thdb thda valid display data(320 tck) invalid valid clk1 hsync de data tfck tck 10% t rck tch tsd thd trd/tfd 90% 90% 10% clk1 dat a timing specifications: 00.5s 01s free datasheet http:///
confidential document FG050605DNSWBG01 rev:1 page: 8 /15 8.3 color data input assignment correspondence between data and display position s0001 s0002 s0003 s0004 s0005 s0006 s0007 s0008 s959 s960 c001 r001 g001 b001 r002 g002 b002 r003 g003 g320 b320 c234 r001 g001 b001 r002 g002 b002 r003 g003 g320 b320 data signal red green blue color r0 r1 r2 r3 r4 r5 g0 g1 g2 g3 g4 g5 b0 b1 b2 b3 b4 b5 black 0 0 0 000000000000 0 0 0 red 1 1 1 111000000000 0 0 0 green 0 0 0 000111111000 0 0 0 blue 0 0 0 000000000111 1 1 1 cyan 0 0 0 000111111111 1 1 1 magenta 1 1 1 111000000111 1 1 1 yellow 1 1 1 111111111000 0 0 0 basic colors white 1 1 1 111111111111 1 1 1 red(0) / dark 0 0 0 000000000000 0 0 0 red(1) 0 0 0 001000000000 0 0 0 red(2) 0 0 0 010000000000 0 0 0 : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : red(61) 1 1 1 101000000000 0 0 0 red(62) 1 1 1 110000000000 0 0 0 gray scale of red red(63) 1 1 1 111000000000 0 0 0 green(0)/ dark 0 0 0 000000000000 0 0 0 green(1) 0 0 0 000000001000 0 0 0 green(2) 0 0 0 000000010000 0 0 0 : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : green(61) 0 0 0 000111101000 0 0 0 green(62) 0 0 0 000111110000 0 0 0 gray scale of green green(63) 0 0 0 000111111000 0 0 0 blue(0)/ dark 0 0 0 000000000000 0 0 0 blue (1) 0 0 0 000000000000 0 0 1 blue (2) 0 0 0 000000000000 0 1 0 : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : blue (61) 0 0 0 000000000111 1 0 1 blue (62) 0 0 0 000000000111 1 1 0 gray scale of blue blue (63) 0 0 0 000000000111 1 1 1 free datasheet http:///
confidential document FG050605DNSWBG01 rev:1 page: 9 /15 9. optical characteristics 9-1. specification: item symbol condition min. typ. max. unit remark rise tr - 15 30 . ms response time fall tf = 0 - 20 40 . ms note 4,6 contrast ratio cr at optimized viewing angle 250 300 note 5,6 top 10 20 - bottom 30 40 - left 45 50 - viewing angle right cr 10 45 50 - deg. note 6,7 brightness 300 350 -- nit note 8 uniformity = 0 80 85 % x 0.25 0.30 0.35 white chromaticity y = 0 0.30 0.35 0.40 note 8 measured by :topcon bm-7 1 4 7 2 5 8 3 6 9 brightness=1+2+3+4+5+6+7+8+9 9 note 1~5:see next page. note 1: ambient temperature =25 c. lamp current i l = 6 marms. note 2: to be measured in the dark room. note 3: to be measured on the center area of panel with a viewing cone of 1 by topcon luminance meter bm-7, after 10 minutes operation. note 4: definition of response time: the output signals of photo-detector are measured when the input signals are changed from ?white? to ?black?(rising time) and from ?black? to ?white?(fa lling time),respectively. the response time is defined as the time interval between the 10% and 90% of amplitudes. refer to figure as shown below. free datasheet http:///
confidential document FG050605DNSWBG01 rev:1 page: 10 /15 100% 90% 10% 0% white white brightness black tr tf note5: definition of contrast ratio: photo-detector output when l cd is at ?white? state contrast ratio (cr)= photo-detector output when lcd is at ?black? state note 6. white vi=v i50 -/+ 1.5v black vi=v i50 +/- 2.0v ?+/-? means that the analog input signa l swings in phase with com signal. ? -/+ ? means that the analog input signal swings out of phase with com signal. v i50 : the analog input voltage when transmission is 50% the 100% transmission is defined as the transmission of lcd panel when all the input terminals of module are electrically opened. note 7. definition of viewing angle: refer to figure as below. note 8. measured at the center area of the panel when a ll the input terminals of lcd panel are electrically opened. contrast ratio is calc ulated with the following formula. free datasheet http:///
confidential document FG050605DNSWBG01 rev:1 page: 11 /15 10. quality assurance 10.1 test condition 10.1.1 temperature and humidity(ambient temperature) temperature : 25 5 c humidity : 65 5% 10.1.2 operation unless specified otherwise, test will be conducted under function state. 10.1.3 container unless specified otherwise, vibration test will be conducted to the product itself without putting it in a container. 10.1.4 test frequency in case of related to deterioration such as shock test. it will be conducted only once. 10.1.5 test method no. reliability test item & level test level 1 high temperature storage test t=(80) c,240hrs 2 low temperature storage test t=(-30) c,240hrs 3 high temperature operation test t=(80) c,240hrs 4 low temperature operation test t=(-30) c,240hrs 5 high temperature and high humidity operation test t=60 c,90% rh,240hrs 6 thermal cycling test (no operation) (-30) c +25 c (+80) c,200 cycles 30 min 5min 30 min 7 vibration test (no operation) frequency : 0 ~ 55 hz amplitude : 1.5 mm sweep time : 11min test period : 6 cycles for each direction of x,y,z 8 electrostatic discharge test (no operation) 150pf,330 ? air : 15kv ; contact : 8kv 10 times/point ; 4 points/panel face free datasheet http:///
confidential document FG050605DNSWBG01 rev:1 page: 12 /15 11. lot numbering system 9 7 4 2 production week number production year 12. lcm numbering system fg 050605 d n s w b g 01 version :01 rohs view direction & temp. range a y bottom view 6h & normal temp. b y bottom view 6h & wide temp. c?top view & normal temp d?top view & wide temp. backlight color w ?white y ? yellow green g - green backlight c?ccfl b/l lcd polarize type n?negative w ?super wide view micro reflector m?transmissive f? transflective lcd type a ?tft analog d ?tft digital series code 050605 ?, 5.6 inch model type fg?standard tft module fx?custom tft module free datasheet http:///
confidential document FG050605DNSWBG01 rev:1 page: 13 /15 13. precaution for using lcm 1. liquid crystal display (lcd) lcd is made up of glass, organic sealant, organic fluid, and polymer based polarizers. the following precautions should be taken when handing, (1). keep the temperature within range of use and storage. excessive temperature and humidity could cause polarization degredation, polarizer peel off or bubble. (2). do not contact the exposed polarizers with anything harder than an hb pencil lead. to clean dust off the display surface, wipe gently with cotton, chamois or other soft material soaked in petroleum benzin. (3). wipe off saliva or water drops immediately. contact with water over a long period of time may cause polarizer deformation or color fading, while an active lcd with water condensation on its surface will cause corrosion of ito electrodes. (4). glass can be easily chipped or cracked from rough handling, especially at corners and edges. (5). do not drive lcd with dc voltage. 2. liquid crystal display modules 2.1 mechanical considerations lcm are assembled and adjusted with a high degree of precision. avoid excessive shocks and do not make any alterations or modifications. the following should be noted. (1). do not tamper in any way with the tabs on the metal frame. (2). do not modify the pcb by drilling extra holes, changing its outline, moving its components or modifying its pattern. (3). do not touch the elastomer connector, especially insert an backlight panel (for example, el). (4). when mounting a lcm make sure that the pcb is not under any stress such as bending or twisting . elastomer contacts are very delicate and missing pixels could result from slight dislocation of any of the elements. (5). avoid pressing on the metal bezel, otherwise the elastomer connector could be deformed and lose contact, resulting in missing pixels. 2.2. static electricity lcm contains cmos lsi?s and the same precaution for such devices should apply, namely (1). the operator should be grounded whenever he/she comes into contact with the module. never touch any of the conductive parts such as the lsi pads, the copper leads on the pcb and the interface terminals with any parts of the human body. (2). the modules should be kept in antistatic bags or other containers resistant to static for storage. (3). only properly grounded soldering irons should be used. (4). if an electric screwdriver is used, it should be well grounded and shielded from commutator sparks. (5) the normal static prevention measures should be observed for work clothes and working benches; for the latter conductive (rubber) mat is recommended. (6). since dry air is inductive to statics, a relative humidity of 50-60% is recommended. 2.3 soldering (1). solder only to the i/o terminals. (2). use only soldering irons with proper grounding and no leakage. (3). soldering temperature : 280 c 10 c (4). soldering time: 3 to 4 sec. (5). use eutectic solder with resin flux fill. (6). if flux is used, the lcd surface should be covered to avoid flux spatters. flux residue should be removed after wards. 2.4 operation (1). the viewing angle can be adjusted by varying the lcd driving voltage v0. (2). driving voltage should be kept within specified range; excess voltage shortens display life. (3). response time increases with decrease in temperature. (4). display may turn black or dark blue at temperatures above its operational range; this is (however not pressing on the viewing area) may cause the segments to appear ?fractured?. (5). mechanical disturbance during operation (such as pressing on the viewing area) may cause the segments to appear ?fractured?. 2.5 storage if any fluid leaks out of a damaged glass cell, wash off any human part that comes into contact with soap and water. never swallow the fluid. the toxicity is extremely low but caution should be exercised at all the time. 2.6 limited warranty unless otherwise agreed between data image and customer, data image will replace or repair any of its lcd and lcm which is found to be defective electrically and visually when inspected in accordance with data image acceptance standards, for a period on one year from date of shipment. confirmation of such date shall be based on freight documents. the warranty liability of data image is limited to repair and/or replacement on the terms set forth above. data image will not responsible for any subsequent or conse q uential events. free datasheet http:///
confidential document FG050605DNSWBG01 rev:1 page: 14 /15 14. outline drawing 1 11/25/05' change wire length from 40 mm to 100 mm , led current from 240 ma to 320 ma. approved auth revisions description date approve: drawn: check: date: scale title: dwg. no. sheet of 1 1 rev. 1 / 1 data image units m m abcde f 1 2 3 4 5 6 16 leds location arrangement voltage :4.5~5.5 (v) current :320 (ma) 32 32 1 tft outline dimension 9/21/05' fg050605s-gl1 2 free datasheet http:///
confidential document FG050605DNSWBG01 rev:1 page: 15 /15 16.package information fg050605c (162g) = 162 x 40 = 6480 g antistatic tray (138g)=138 x 10 = 1380 g carton+form+antiatatic form+drier = 8900 g form (15 mm) antirust lcm drier antistatic form antistatic tray (antistatic tray) cover tray form (35 mm) drier antirust 1 antistatic tray = 5 pcs material 1 carton = 40pcs total pcs . total weight = 8.9 kgw 5.6" tft lcm packing . carton antistatic bag carton size : 482l x 282w x 279h (mm) 1 anti-static bag = 4 anti-static tray + cover tray = 4*5 +0 = 20 pcs 1 carton + 2 anti-static bag + 1 form(35mm*1 e 15mm*2) + 10 anti-static tray 1 carton = 2 anti-static bag = 2*20 = 40 pcs form (15mm) free datasheet http:///

▲Up To Search▲

Price & Availability of FG050605DNSWBG01

	To Download FG050605DNSWBG01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .