25.08.2011 RLT650-500-T 1 of 3 RLT650-500-T technical data high power visible laser diode features ? lasing mode structure: multi mode ? peak wavelength : typ. 650 nm ? optical ouput power: 500 mw ? package: to-3, without photodiode electrical connection pin configuration bottom view pin function 1 ld cathode 2 ld anode (isolated from case) absolute maximum ratings (t c =20c) item symbol value unit cw output power p o 500 mw operating case temperature t c -10 ? +25 c storage temperature t stg -40 ? +85 c specifications (t c =20c) item symbol min. typ. max. unit optical specifications cw output power p o - 500 - mw center wavelength c 645 650 660 nm spectral width (fwhm) ? - 1 2.5 nm wavelength temperature coefficient ? / ? t - 0.25 - nm/c U - - 10 deg fwhm beam divergence - - 40 deg emitting aperature w x h 150 x 1 m polarization te lifetime 5000 - - hour electrical specifications threshold current i th - 850 1000 ma operating current i op - 1370 1500 ma slope efficiency 0.85 0.90 - w/a operating voltage u op - 2.1 2.3 v series resistance r d - - - ? the above specifications are for reference purpose only and subjected to change without prior notice.
25.08.2011 RLT650-500-T 2 of 3 package dimensons to-3 package ( unit:mm )
25.08.2011 RLT650-500-T 3 of 3 safety of laser light ? laser light can damage the human eyes and skin. do not expose the eye or skin directly to any laser light and/or through optical lens. when handling the lds, wear appropriate safety glasses to prevent laser light, even any reflections from entering to the eye. focused laser beam through optical instruments will increase the chance of eye hazard. cautions 1. operating methode ? this ld shall change its forward voltage requirement and optical ouput power according to temperature change. also, the ld will require more operation current to maintain same ouput power as it degrades. in order to maintain output power, use of apc (automatic power control) is recommended. which use monitor feedback to adjust the operation current. ? confirm that electrical spike current generated by switching on and off does not exceed the maximum operating current level specified her ein above as absolute maximum rating. also, employ appropriat countermeasures to reduce c hattering and/or overshooting in the circuit. 2. static electricity ? static electricity or electrical surges will reduce and degrade the reliability of the lds. it is recommended to use a wrist trap or anti-electrostatic glove when handeling the product. 3. absolute maximum rating ? active layer of lds shall have high current density and generate high electric field during its operation. in order to prevent excessive dam age, the ld must be operated striclty below absolute maximum rating.
|
