b85 5mm pitch miniature potting connector for secondary power supply df5 series features 1. potting product this connector is capable of potting 9mm maximum, and 22.5mm mounting height is a low profile. (figure 1). 2. prevent mis-insertion when the socket and pin header are mated, this connector is equipped with a mechanism to prevent reverse insertion or dissimilar contact insertion. 3. means to prevent solder cracks the pin header employs glass enforced resin, and takes countermeasures to prevent solder cracks due to heat shrinkage. 4. prevent reverse insertion in printed board boss is added to the pin header, and prevents reverse insertion in the printed board. 5. full lock mechanism the outer lock system employs full lock mechanism. 6. current capacity of 8a power can be supplied at 8 a maximum. specification will change according to applicable cable, number of contacts, number of rows. for further information, refer to product specifications as listed on next page. applications business machines, industrial equipment, consumer appliances (hot water supply, washing machines, refrigerator) etc. figure 1-1 single row type figure 1-2 double row type the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b86 product specifications item specification condition 1. insulation resistance 1000m ohms min. 500v dc 2. withstanding voltage no flashover or insulation breakdown. 1500v ac/1 minute 3. contact resistance 30m ohms max. 100ma 4. single insertior/ 0.3n (30gt) min., 4.5n (450gt) max. measured with 1.14 0.002mm steel pin extraction force 5. vibration no electrical discontinuity of 10s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 6. humidity (steady state) contact resistance: 30m ohms max., insulation resistance: 500m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 7 . temperature cycle no damage, cracks, or parts looseness. ( C 55 ? : 30 minutes ? 15 to 35 ? : 10 minutes ? 85 ? : 30 minutes ? 5 to 35 ? : 10 minutes ) 5 cycles 8. durability (mating/un-mating) contact resistance: 30m ohms max. 30 cycles 9. resistance to no deformation of flow: 260? for 10 seconds soldering heat components affecting performance. manual soldering: 300? for 3 seconds product part material finish remarks crimping socket insulator polyamide white ul94v-0 crimping contact for socket contact phosphor bronze tin plated -------------------- pin header insulator polyamide beige ul94v-0 contact brass tin plated -------------------- note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. material note: hirose's tin plating process takes measures against whisker. ordering information connector contact no. of rows no. of contacts awg # 18 awg # 20 awg # 22 single row 2 to 10 8a 6a 5a operating temperature range C 35 to + 85 ? (note 1) 48a6a5a operating moisture range 20 to 80 % 68a6a5a rating current rating 87a6a5a double row 10 7a 6a 5a 12 7a 6a 4a storage temperature range C 10 to + 60 ? (note 2) 14 7a 5a 4a storage humidity range 40 to 70 % (note 2) 16 7a 5a 4a voltage rating 500v ac contact pitch: 5mm contact type c : crimping socket dsa : straight pin header series name: df 5a number of contacts : single row: 2 to 10 double row: 4 to 10 connector type s : single row socket ds : double row socket p : single row header dp : double row header packaging type scf : socket contact, reel packaging sc : socket contact, bag packaging applicable cable type none: ul 1007 a: ul 1015 applicable cable size 1822: awg # 18~ # 22 df5a - * s - 5 c 1 2 3 4 5 df5a - 1822 scf 1 2 3 1 1 3 2 4 5 2 3 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b87 product no cl no. number of contacts ab df5a- 2s-5c 676-0007-8 2 5.0 10.5 df5a- 3s-5c 676-0008-0 3 10.0 15.5 df5a- 4s-5c 676-0009-3 4 15.0 20.5 df5a- 5s-5c 676-0010-2 5 20.0 25.5 df5a- 6s-5c 676-0011-5 6 25.0 30.5 df5a- 7s-5c 676-0012-8 7 30.0 35.5 df5a- 8s-5c 676-0013-0 8 35.0 40.5 df5a- 9s-5c 676-0014-3 9 40.0 45.5 df5a-10s-5c 676-0015-6 10 45.0 50.5 single row socket note: a packaging quantity is delivered by the bag unit (100 pcs.). single row pin header part number cl no. number of contacts cd df5a- 2p-5dsa 676-0016-9 2 5.0 12.5 df5a- 3p-5dsa 676-0017-1 3 10.0 17.5 df5a- 4p-5dsa 676-0018-4 4 15.0 22.5 df5a- 5p-5dsa 676-0019-7 5 20.0 27.5 df5a- 6p-5dsa 676-0020-6 6 25.0 32.5 df5a- 7p-5dsa 676-0021-9 7 30.0 37.5 df5a- 8p-5dsa 676-0022-1 8 35.0 42.5 df5a- 9p-5dsa 676-0023-4 9 40.0 47.5 df5a-10p-5dsa 676-0024-7 10 45.0 52.5 note: a packaging quantity is delivered by the bag unit (100 pcs.). contact inserted contact inserted yes rohs yes rohs the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b88 double row socket double row pin header part number cl no. number of contacts ef df5a- 4ds-5c 676-0025-0 4 5.0 10.5 df5a- 6ds-5c 676-0026-2 6 10.0 15.5 df5a- 8ds-5c 676-0027-5 8 15.0 20.5 df5a-10ds-5c 676-0028-8 10 20.0 25.5 df5a-12ds-5c 676-0036-6 12 25.0 30.5 df5a-14ds-5c 676-0037-9 14 30.0 35.5 df5a-16ds-5c 676-0038-1 16 35.0 40.5 note: a packaging quantity is delivered by the bag unit (100 pcs.). part number cl no. number of contacts gh df5a- 4dp-5dsa 676-0029-0 4 5.0 12.5 df5a- 6dp-5dsa 676-0030-0 6 10.0 17.5 df5a- 8dp-5dsa 676-0031-2 8 15.0 22.5 df5a-10dp-5dsa 676-0032-5 10 20.0 27.5 df5a-12dp-5dsa 676-0033-8 12 25.0 32.5 df5a-14dp-5dsa 676-0034-0 14 30.0 37.5 df5a-16dp-5ds a 676-0035-3 16 35.0 42.5 note: a packaging quantity is delivered by the bag unit (100 pcs.). contact inserted yes rohs yes rohs the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b89 b pcb mounting pattern (board thickness = 1.6 0.1) socket crimping contact applicable cable packaging part number hrs. no. quantity j k ul style jacket dia. awg size contact construction type df5-1822scf(51) 676-0001-1-51 reel 5,000 1007 1.5 to 2.2 awg # 18 43 cores/0.16mm 2.8 3 df5-1822sc(51) 676-0002-4-51 bag 100 awg # 20 21 cores/0.18mm df5a-1822scf(51) 676-0003-7-51 reel 5,000 1015 2.2 to 3.2 awg # 22 17 cores/0.16mm 3.8 4 df5a-1822sc(51) 676-0004-0-51 bag 100 note 1. the applicable cable conductor is a tin plated and annealed copper wire. note 2. if other cables are used instead of the applicable cable, contact the hrs sales department. b applicable crimping tools type item part number cl no. applicable contact press unit cm-105 901-0005-4 ------------------------------ auto- ap105-df5-1822s 901-4542-5 df5-1822scf ( 51 ) matic applicator ap105-df5a-1822s 901-4546-6 df5a-1822scf ( 51 ) df5-1822/cr-ht 550-0264-0 df5-1822sc ( 51 ) manual manual crimping tool df5a-1822/cr-ht 550-0265-2 df5a-1822sc ( 51 ) ----- extraction tool rp13-pc-tp 150-0021-5 df5/df5a-1822scf ( 51 ) b application pattern df5a- * p-5dsa df5a- * dp-5dsa note 1. for c and g sizes, please refer to pages where individual product patterns are shown. note: if any trouble has been caused due to other tools, which are not designated by hirose, hirose won't guarantees any produc t. yes rohs the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b90 b precautions 1. recommended soldering flow: 250? for 5 seconds condition manual soldering: 290? for 3 seconds 2. cleaning condition refer to the "nylon connector use hand book" 3. connecting condition refer to the "nylon connector use hand book" 4. cautions the color phase of this product may be slightly differ from that of the formed product according to the manufacturing lot, and consequent storage condition, however, the difference affects no performance. 5. precautions refer to the "nylon connector use hand book" the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
|
