csm_a165e_ds_e_4_1 1 emergency stop switch (16-dia.) a165e separate construction with smallest class of depth in the world ? direct opening mechanism to open contacts in emergencies, such as when they are welded. ? conforms to en418. ? includes a safety lock to prevent misuse. ? features separate construction that allows the switch to be separated for easier wiring and one-piece-like construction that allows easier handling. ? models available with 3 contacts built into a single block (a165e-u). model number structure list of models model number legend (completely assembled) .........................shipped as a set that includes the operation unit and light source. diameter of operation unit function model shape 30-mm models 40-mm models push-lock, turn-reset a165e separate construction (30-mm model) a165e- @ -03u one-piece construction (30-mm model) be sure to read the precautions for all pushbutton switches in the pushbutton switches group catalog (cat. no. x032), as well as the ?safety precautions? on page 9. s ls m lm none 24d 01 ip65 (oil-resistant) 02 03u 2. light source 1. operation unit shape and functions code 30 dia. 40 dia. 3. contacts code description spst-nc dpst-nc tpst-nc * * tpst-nc models have one-piece construction with the contact unit. only non-lighted models are available. note: models with separate construction (spst-nc and dpst-nc) are for normal loads only. one-piece models (tpst-nc) are for either normal loads or microloads. non-lighted lighted non-lighted lighted push-lock, turn-reset code non-lighted led 24 vac/ vdc5% 24 vac/ vdc --- --- functions type operation voltage rated voltage pushbutton ls 24d 02
2 a165e ordering information list of sets list of sets (in different colors) * models with yellow or gray pushbutton co lors cannot be used as emergency switches. individual parts (for switches with s eparate construction) operation units lamps switches switch units illumination rated voltage pushbutton color pushbutton size terminal contact form model led 24 vac/vdc red 30 dia. solder terminal spst-nc A165E-LS-24D-01 dpst-nc a165e-ls-24d-02 non-lighted --- spst-nc a165e-s-01 dpst-nc a165e-s-02 led 24 vac/vdc 40 dia. spst-nc a165e-lm-24d-01 dpst-nc a165e-lm-24d-02 non-lighted --- spst-nc a165e-m-01 dpst-nc a165e-m-02 non-lighted --- 30 dia. tpst-nc a165e-s-03u 40 dia. a165e-m-03u illumination pushbutton color * pushbutton size terminal contact form model non-lighted yellow 30 dia. solder terminal spst-nc a165e-sy-01 gray a165e-sgr-01 yellow dpst-nc a165e-sy-02 gray a165e-sgr-02 yellow 40 dia. spst-nc a165e-my-01 gray a165e-mgr-01 yellow dpst-nc a165e-my-02 gray a165e-mgr-02 yellow 30 dia. tpst-nc a165e-sy-03u gray a165e-sgr-03u yellow 40 dia. a165e-my-03u gray a165e-mgr-03u appearance illumination model 30 dia. non-lighted a165e-s lighted a165e-ls 40 dia. non-lighted a165e-m lighted a165e-lm appearance led color rated voltage model red bright 5 vdc a16-5dsr 12 vac/vdc a16-12dsr 24 vac/vdc a16-24dsr appearance illumination contact form model non-lighted spst-nc a165e-01 dpst-nc a165e-02 lighted spst-nc a165e-01l dpst-nc a165e-02l appearance illumination contact form model lighted spst-nc a165e-r-24d-01 dpst-nc a165e-r-24d-02
a165e 3 accessories (order separately) specifications certified standard ratings ul508, csa c22.2 no.14, ccc(gb14048.5) models with sepa rate construction models with one-piece construction tv(en60947-5-1) models with sepa rate construction models with one-piece construction certified standards * certification for csa c22.2 no. 14 is indicated by the mark. separate construction models have been certified for the switch unit. switch ratings models with separate construction note: minimum applicable load: 5 vdc, 150 ma models with one-piece construction note: minimum applicable load: 5 vdc, 1 ma led ratings (only for models with leds) item appearance type model precautions yellow plate yellow, 45 dia. a16z-5070 use this as an emergency stop nameplate. panel plug round a16zt-3003 used for covering the panel cutouts for future panel expansion. degree of protection: ip40 color: black tightening tool --- a16z-3004 useful for repetitive mounting. be careful not to tighten excessively. extractor a16z-5080 convenient for extracting the switch and lamp. rated voltage resistive load 125 vac 250 vac 30 vdc 5 a 3 a 3 a rated voltage resistive load 125 vac 250 vac 30 vdc 1 a 0.5 a 1 a rated voltage resistive load 250 vac 30 vdc 3 a 3 a rated voltage resistive load 250 vac 30 vdc 0.5 a 1 a certification body standards file no. ul * ul508, csa c22.2 no.14 e41515 tv sd en60947-5-1, en60947-5-5 inquire cqc (ccc) gb14048.5 2003010303070678 rated voltage resistive load 125 vac 250 vac 30 vdc 5 a 3 a 3 a rated voltage resistive load 125 vac 250 vac 30 vdc 1 a 0.5 a 1 a rated voltage rated current operation voltage 24 vac/vdc 8 ma 24 vac/vdc5%
4 a165e characteristics *1. led not mounted. (test them with the led removed.) *2. degree of protection from the front of the panel. operating characteristics structure and nomenclature type item emergency stop switch non-lighted a165e-s/a165e-m lighted a165e-ls/a165-lm non-lighted, one-piece construction a165e-u allowable operating frequency mechanical 20 operations/minute max. electrical 10 operations/minute max. insulation resistance 100 m min. (at 500 vdc) dielectric strength between terminals of same polarity 1,000 vac, 50/60 hz for 1 min between terminals of different polarity 2,000 vac 50/60 hz for 1 min between each terminal and ground 2,000 vac 50/60 hz for 1 min between lamp terminals 1,000 vac, 50/60 hz for 1 min * 1--- vibration resistance malfunction 10 to 55 hz, 1.5-mm double amplit ude (malfunction within 1 ms) shock resistance destruction 500 m/s 2 malfunction 300 m/s 2 max. (malfunction within 1 ms) 150 m/s 2 max. (malfunction within 1 ms) durability mechanical 100,000 operations min. electrical 100,000 operations min. degree of protection ip65 oil-resistant * 2 ip65 * 2 ip65 oil-resistant * 2 electric shock protection class class ii pti (tracking characteristic) 175 degree of contamination 3 (en60947-5-1) weight approx. 16 g (in case of dpst-nc switches) ambient operating temperature ? 10 to 55 c (with no icing or condensation) ambient operating humidity 35 % to 85 % ambient storage temperature ? 25 to 65 c (with no icing or condensation) type item characteristics of models with separate construction characteristics of models with one-piece construction operating force of max. 14.7 n 14.7 n releasing force rf min. 0.1 nm 0.1 nm pretravel pt 3.5 0.5 mm 3 0.5 mm s witch holder operation unit color operation unit color ? models with led illumination: red ? non-lighted models * : red, yellow, or gray degree of protection ip65 oil resistance specifications for standard load 125 vac, 5 a 250 vac, 3 a 30 vdc, 3 a operation unit switch (the above figure is example of the separate construction model.) * models with yellow or gray pushbutton colo rs cannot be used as emergency switches.
a165e 5 dimensions (unit: mm) a165e- s mo u nting ring lock ring lock p a cking (t=0.5) 16 +0.2 di a . 0 3 +0.1 di a . 0 3 0 di a . non-lighted model s 3 0 mm di a meter 7. 8 +0. 3 0 p a nel c u to u t dimen s ion s when a pplying a co a ting su ch as p a int to the p a nel, dimen s ion s a fter the co a ting m us t sa ti s fy the s pecified dimen s ion s . recommended p a nel thickne ss : 0.5 to 3 .2 mm. m16 1 2.6 1.4 2. 8 1 8 12.1 10. 8 5 22.00. 8 2 8 .50. 8 200. 8 12. 3 15. 8 16 +0.2 di a . 0 3 +0.1 di a . 0 lock ring lock p a cking (t=0.5) mo u nting ring 3 0 di a . a165e-l s lighted model s 3 0 mm di a meter 0 7. 8 +0. 3 p a nel c u to u t dimen s ion s when a pplying a co a ting su ch as p a int to the p a nel, dimen s ion s a fter the co a ting m us t sa ti s fy the s pecified dimen s ion s . recommended p a nel thickne ss : 0.5 to 3 .2 mm. m16 1 2. 8 1 8 12.1 10. 8 0.5 22.10. 8 2 8 .50. 8 200. 8 12. 3 4. 8 5 15. 8 2.6 1.4 2 8 .50. 8 20.50. 8 21.50.5 1 a165e -s-03u lock p a cking (t=0.5) lock ring mo u nting ring 16 +0.2 di a . 0 3 +0.1 di a . 0 3 0 di a . 7. 8 +0. 3 0 p a nel c u to u t dimen s ion s when a pplying a co a ting su ch as p a int to the p a nel, dimen s ion s a fter the co a ting m us t sa ti s fy the s pecified dimen s ion s . recommended p a nel thickne ss : 0.5 to 3 .2 mm. non-lighted, one-piece con s tr u ction model s 3 0 mm di a meter m16 1
6 a165e a165e-m mo u nting ring lock ring lock p a cking (t=0.5) 40 di a . s witch non-lighted model s 40 mm di a meter 16 +0.2 di a . 0 3 +0.1 di a . 0 7. 8 +0. 3 0 p a nel c u to u t dimen s ion s when a pplying a co a ting su ch as p a int to the p a nel, dimen s ion s a fter the co a ting m us t sa ti s fy the s pecified dimen s ion s . recommended p a nel thickne ss : 0.5 to 3 .2 mm. m16 1 2. 8 1 8 12.1 10. 8 0.5 21.10. 8 2 8 .50. 8 200. 8 12. 3 0.5 15. 8 2.6 1.4 a165e-lm mo u nting ring lock ring lock p a cking (t=0.5) 40 di a . s witch lighted model s 40 mm di a meter 16 +0.2 di a . 0 3 +0.1 di a . 0 7. 8 +0. 3 0 p a nel c u to u t dimen s ion s when a pplying a co a ting su ch as p a int to the p a nel, dimen s ion s a fter the co a ting m us t sa ti s fy the s pecified dimen s ion s . recommended p a nel thickne ss : 0.5 to 3 .2 mm. m16 1 0.5 12. 3 15. 8 2. 8 6.05 1 8 10. 8 0.5 22.10. 8 2 8 .50. 8 200. 8 a165e-m-0 3 u mo u nting ring lock ring 40 di a . lock p a cking (t=0.5) one-piece con s tr u ction model s 40 mm di a meter 3 +0.1 di a . 0 16 +0.2 di a . 0 7. 8 +0. 3 0 p a nel c u to u t dimen s ion s when a pplying a co a ting su ch as p a int to the p a nel, dimen s ion s a fter the co a ting m us t sa ti s fy the s pecified dimen s ion s . recommended p a nel thickne ss : 0.5 to 3 .2 mm. m16 1 21.5 0.5 20.5 0. 8 2 8 .5 0. 8 1
a165e 7 accessories terminal arrangement note: the l+ and l ? terminals are not available with the non-lighted models. yellow plate (vinyl chloride) lock ring panel plugs (round type) a16zt-3003 ? select an appropriate panel plug ac cording to the panel design and mount from the front side of the panel. panel cutout dimensions are the same as those for the operation unit. tightening tool t=1 a16z-5070 15.6 dia. 45 dia. 12 12 15.8 0.1 dia. rough surface 15 dia. 0 ? 0.1 rough surface 1 8 di a . a16z-3004 18 dia. spst switches dpst switches tpst switches nc1 nc1 l ? l + s w1 nc1 nc2 nc2 nc1 l ? l + s w1 s w2 nc2 nc1 nc3 stopper
8 a165e installation mounting to the panel (models with separate construction) after installing the operation unit, snap in the switch from the back of the panel. (1) installing the operation unit (2) mounting the switch (3) removing the switch ? snap on the switch to the operation unit. ? make sure that the switch has the correct orientation when snapping it onto the operation unit. ? align the white dot on the operation unit with the guide groove on the side of the switch marked with an ?l? as shown below, and push the switch into the operation unit until it clicks into place. confirm that the switch is securely in place before using. ? insert the prongs of the a16z-5080 extractor between the switch and the operation unit, grip the switch, and pull to remove. (4) installing the led lamp ? when mounting the lamp, make sure it is facing the direction shown in the following diagram. insert the lamp while matching the protruding part of the lamp and the small guides on the outer surface of the switch. p a nel mo u nting n u t lock ring (incl u ded with the prod u ct) r ubb er p a cking (incl u ded with the prod u ct) or yellow pl a te ( s old s ep a r a tely) edge lock c u to u t p a nel mo u nting n u t (incl u ded with the prod u ct) lock hole lock ring (incl u ded with the prod u ct) r ubb er p a cking (incl u ded with the prod u ct) or yellow pl a te ( s old s ep a r a tely) ? attach rubber packing or the yellow plate onto the operation unit from its terminal side. insert the operation unit into the panel from the front. install the lock ring and mounting nut from the terminal side and tighten. ? adjust the slits on the hole of rubber packing and yellow plate to the protruding part of the unit. ? rubber packing is not necessary when the yellow plate is used. ? tighten the nut to the torque of 0.29 to 0.49 nm. ? the operation unit should be installed with its protruding part adjusted to the slit of the panel hole. ? align the lock ring to the groove of the operation unit so that the edge is drawn to the panel side. white dot guide groove l marking extractor (a16z-5080) narrow guide protruding part wide guide
a165e 9 safety precautions be sure to read the precautions for all pushbutton switches in the pushbutton switches group catalog (cat. no. x032). ! caution if the operation unit is separated from the switch unit, the equipment will not stop, cr eating a hazardous condition. always confirm that safety functions are operating before starting operation. mounting ? always make sure that the power is turned off before mounting, removing, or wiring the switch, or performing maintenance. electrical shock or fire may resu lt if the power is not turned off. ? the tightening torque is 0.29 to 0.49 nm. wiring ? be sure to use electrical wires that are a size appropriate for the applied voltage and carry current. pe rform soldering according to the conditions given below. if t he soldering is not properly performed, abnormal heating may result, possibly resulting in fire. 1. hand soldering: 30 w, within 5 s 2. dip soldering: 240 c, within 3 s wait for one minute after solderin g before exerting any external force on the solder. ? use non-corrosive resin fluid as the flux. ? make sure that the electric cord is wired so that it does not touch the unit. if the electric cord will touch the unit, then electric wires with a heat resistance of 100 c min. must be used. ? after wiring the switch, maintain an appropriate clearance and creepage distance. operating environment ? the ip65 model is designed with a degree of protection so that it will not sustain damage if it is subj ected to water from any direction to the front of the panel. ? the switch is intended for indoor use only. using the switch outdoor may cause it to fail. using the microload ? insert a contact protection circui t, if necessary, to prevent the reduction of life expectancy due to extreme wear on the contacts caused by loads where inrush curr ent occurs when the contact is opened and closed. ? the a165e- @ u (one-piece construction) allows both a standard load (125 v at 1 a, 250 v at 0.5 a) and a microload. if a standard load is applied, however, the microload area cannot be used. if the microload area is used with a standard load, the contact surface will become rough, and the opening and closing of the contact for a microload may become unreliable. ? the minimum applicable load is the n-level reference value. this value indicates the malfunction refe rence level for the reliability level of 60 % ( 60 ) (conforming to jis c5003). ? the equation, 60 = 0.5 x 10 ? 6 /time indicates that the estimated malfunction rate is less than 1/2,000,000 with a reliability level of 60 % . leds the led current-limiting re sistor is built-in, so external resistance is not required. operating torque ? do not exceed an operating torque of 0.49 nm in the direction of rotation. ? do not pull the operating button or apply excessive force to any side of the button. otherwise it may be damaged. others ? the oil-resistant ip65 uses nbr rubber and is resistant to general cutting oil and cooling oil. some s pecial oils cannot be used with the oil-resistant ip65, however, so contact your omron representative for details. ? if the panel is to be coated, make sure that the panel meets the specified dimensions after coating. ? due to the structure of the switch, severe shock or vibration may cause malfunctions or damage to the switch. also, most switches are made from resin and will be damaged if they come into contact with shar p objects. particul arly scratches on the operation unit may create visual and operational obtrusions. handle the switches with care, and do not throw or drop them. precautions for correct use 0.15 ma 1 ma area of use voltage (v) current (ma) invalid area rated voltage internal limiting resistor 24 vac/vdc 2.4 k
r e a d a n d u n d e r s t a n d t h i s c a t a l o g p l e a s e r e a d a n d u n d e r s t a n d t h i s c a t a l o g b e f o r e p u r c h a s i n g t h e p r o d u c t s . p l e a s e c o n s u l t y o u r o m r o n r e p r e s e n t a t i v e i f y o u h a v e a n y q u e s t i o n s o r c o m m e n t s . w a r r a n t y a n d l i m i t a t i o n s o f l i a b i l i t y w a r r a n t y o m r o n ' s e x c l u s i v e w a r r a n t y i s t h a t t h e p r o d u c t s a r e f r e e f r o m d e f e c t s i n m a t e r i a l s a n d w o r k m a n s h i p f o r a p e r i o d o f o n e y e a r ( o r o t h e r p e r i o d i f s p e c i f i e d ) f r o m d a t e o f s a l e b y o m r o n . o m r o n m a k e s n o w a r r a n t y o r r e p r e s e n t a t i o n , e x p r e s s o r i m p l i e d , r e g a r d i n g n o n - i n f r i n g e m e n t , m e r c h a n t a b i l i t y , o r f i t n e s s f o r p a r t i c u l a r p u r p o s e o f t h e p r o d u c t s . a n y b u y e r o r u s e r a c k n o w l e d g e s t h a t t h e b u y e r o r u s e r a l o n e h a s d e t e r m i n e d t h a t t h e p r o d u c t s w i l l s u i t a b l y m e e t t h e r e q u i r e m e n t s o f t h e i r i n t e n d e d u s e . o m r o n d i s c l a i m s a l l o t h e r w a r r a n t i e s , e x p r e s s o r i m p l i e d . l i m i t a t i o n s o f l i a b i l i t y o m r o n s h a l l n o t b e r e s p o n s i b l e f o r s p e c i a l , i n d i r e c t , o r c o n s e q u e n t i a l d a m a g e s , l o s s o f p r o f i t s o r c o m m e r c i a l l o s s i n a n y w a y c o n n e c t e d w i t h t h e p r o d u c t s , w h e t h e r s u c h c l a i m i s b a s e d o n c o n t r a c t , w a r r a n t y , n e g l i g e n c e , o r s t r i c t l i a b i l i t y . i n n o e v e n t s h a l l t h e r e s p o n s i b i l i t y o f o m r o n f o r a n y a c t e x c e e d t h e i n d i v i d u a l p r i c e o f t h e p r o d u c t o n w h i c h l i a b i l i t y i s a s s e r t e d . i n n o e v e n t s h a l l o m r o n b e r e s p o n s i b l e f o r w a r r a n t y , r e p a i r , o r o t h e r c l a i m s r e g a r d i n g t h e p r o d u c t s u n l e s s o m r o n ' s a n a l y s i s c o n f i r m s t h a t t h e p r o d u c t s w e r e p r o p e r l y h a n d l e d , s t o r e d , i n s t a l l e d , a n d m a i n t a i n e d a n d n o t s u b j e c t t o c o n t a m i n a t i o n , a b u s e , m i s u s e , o r i n a p p r o p r i a t e m o d i f i c a t i o n o r r e p a i r . a p p l i c a t i o n c o n s i d e r a t i o n s s u i t a b i l i t y f o r u s e o m r o n s h a l l n o t b e r e s p o n s i b l e f o r c o n f o r m i t y w i t h a n y s t a n d a r d s , c o d e s , o r r e g u l a t i o n s t h a t a p p l y t o t h e c o m b i n a t i o n o f p r o d u c t s i n t h e c u s t o m e r ' s a p p l i c a t i o n o r u s e o f t h e p r o d u c t s . a t t h e c u s t o m e r ' s r e q u e s t , o m r o n w i l l p r o v i d e a p p l i c a b l e t h i r d p a r t y c e r t i f i c a t i o n d o c u m e n t s i d e n t i f y i n g r a t i n g s a n d l i m i t a t i o n s o f u s e t h a t a p p l y t o t h e p r o d u c t s . t h i s i n f o r m a t i o n b y i t s e l f i s n o t s u f f i c i e n t f o r a c o m p l e t e d e t e r m i n a t i o n o f t h e s u i t a b i l i t y o f t h e p r o d u c t s i n c o m b i n a t i o n w i t h t h e e n d p r o d u c t , machin e , s y s t e m , o r o t h e r a p p l i c a t i o n o r u s e . t h e f o l l o w i n g a r e s o m e e x a m p l e s o f a p p l i c a t i o n s f o r w h i c h p a r t i c u l a r a t t e n t i o n m u s t b e g i v e n . t h i s i s n o t i n t e n d e d t o b e a n e x h a u s t i v e l i s t o f a l l p o s s i b l e u s e s o f t h e p r o d u c t s , n o r i s i t i n t e n d e d t o i m p l y t h a t t h e u s e s l i s t e d m a y b e s u i t a b l e f o r t h e p r o d u c t s : o u t d o o r u s e , u s e s i n v o l v i n g p o t e n t i a l c h e m i c a l c o n t a m i n a t i o n o r e l e c t r i c a l i n t e r f e r e n c e , o r c o n d i t i o n s o r u s e s n o t d e s c r i b e d i n t h i s c a t a l o g . n u c l e a r e n e r g y c o n t r o l s y s t e m s , c o m b u s t i o n s y s t e m s , r a i l r o a d s y s t e m s , a v i a t i o n s y s t e m s , m e d i c a l e q u i p m e n t , a m u s e m e n t m a c h i n e s , v e h i c l e s , s a f e t y e q u i p m e n t , a n d i n s t a l l a t i o n s s u b j e c t t o s e p a r a t e i n d u s t r y o r g o v e r n m e n t r e g u l a t i o n s . s y s t e m s , m a c h i n e s , a n d e q u i p m e n t t h a t c o u l d p r e s e n t a r i s k t o l i f e o r p r o p e r t y . p l e a s e k n o w a n d o b s e r v e a l l p r o h i b i t i o n s o f u s e a p p l i c a b l e t o t h e p r o d u c t s . n e v e r u s e t h e p r o d u c t s f o r a n a p p l i c a t i o n i n v o l v i n g s e r i o u s r i s k t o l i f e o r p r o p e r t y w i t h o u t e n s u r i n g t h a t t h e s y s t e m a s a w h o l e h a s b e e n d e s i g n e d t o a d d r e s s t h e r i s k s , a n d t h a t t h e o m r o n p r o d u c t s a r e p r o p e r l y r a t e d a n d i n s t a l l e d f o r t h e i n t e n d e d u s e w i t h i n t h e o v e r a l l e q u i p m e n t o r s y s t e m . p r o g r a m m a b l e p r o d u c t s o m r o n s h a l l n o t b e r e s p o n s i b l e f o r t h e u s e r ' s p r o g r a m m i n g o f a p r o g r a m m a b l e p r o d u c t , o r a n y c o n s e q u e n c e t h e r e o f . d i s c l a i m e r s c h a n g e i n s p e c i f i c a t i o n s p r o d u c t s p e c i f i c a t i o n s a n d a c c e s s o r i e s m a y b e c h a n g e d a t a n y t i m e b a s e d o n i m p r o v e m e n t s a n d o t h e r r e a s o n s . i t i s o u r p r a c t i c e t o c h a n g e m o d e l n u m b e r s w h e n p u b l i s h e d r a t i n g s o r f e a t u r e s a r e c h a n g e d , o r w h e n s i g n i f i c a n t c o n s t r u c t i o n c h a n g e s a r e m a d e . h o w e v e r , s o m e s p e c i f i c a t i o n s o f t h e p r o d u c t s m a y b e c h a n g e d w i t h o u t a n y n o t i c e . w h e n i n d o u b t , s p e c i a l m o d e l n u m b e r s m a y b e a s s i g n e d t o f i x o r e s t a b l i s h k e y s p e c i f i c a t i o n s f o r y o u r a p p l i c a t i o n o n y o u r r e q u e s t . p l e a s e c o n s u l t w i t h y o u r o m r o n r e p r e s e n t a t i v e a t a n y t i m e t o c o n f i r m a c t u a l s p e c i f i c a t i o n s o f p u r c h a s e d p r o d u c t s . d i m e n s i o n s a n d w e i g h t s d i m e n s i o n s a n d w e i g h t s a r e n o m i n a l a n d a r e n o t t o b e u s e d f o r m a n u f a c t u r i n g p u r p o s e s , e v e n w h e n t o l e r a n c e s a r e s h o w n . p e r f o r m a n c e d a t a perfor m a n c e d a t a g i v e n i n t h i s c a t a l o g i s p r o v i d e d a s a g u i d e f o r t h e u s e r i n d e t e r m i n i n g s u i t a b i l i t y a n d d o e s n o t c o n s t i t u t e a w a r r a n t y . i t m a y r e p r e s e n t t h e r e s u l t o f o m r o n ? s t e s t c o n d i t i o n s , a n d t h e u s e r s m u s t c o r r e l a t e i t t o a c t u a l a p p l i c a t i o n r e q u i r e m e n t s . a c t u a l p e r f o r m a n c e i s s u b j e c t t o t h e o m r o n w a r r a n t y a n d l i m i t a t i o n s o f l i a b i l i t y . e r r o r s a n d o m i s s i o n s t h e i n f o r m a t i o n i n t h i s d o c u m e n t h a s b e e n c a r e f u l l y c h e c k e d a n d i s b e l i e v e d t o b e a c c u r a t e ; h o w e v e r , n o r e s p o n s i b i l i t y i s a s s u m e d f o r c l e r i c a l , t y p o g r a p h i c a l , o r p r o o f r e a d i n g e r r o r s , o r o m i s s i o n s . 2009 . 3 i n t h e i n t e r e s t o f p r o d u c t i m p r o v e m e n t , s p e c i f i c a t i o n s a r e s u b j e c t t o c h a n g e w i t h o u t n o t i c e . o m r o n c o r p o r a t i o n i n d u s t r i a l a u t o m a t i o n c o m p a n y h t t p : / / w w w . i a . o m r o n . c o m / ( c ) c o p y r i g h t o m r o n c o r p o r a t i o n 2 0 0 9 a l l r i g h t r e s e r v e d .
|
