1 meet requirements of usb 2.0 ux series 2008.4 w features 1. certified to perform as required in usb 2.0 standard tested and certified by usb association approved laboratory the connectors will perform at transmission speeds up to 480mbps. 2. designed for low skew performance the distance between twisted pairs conductors (i.e., contact nos. 2 and 3) is of equal electrical length, for receptacle and plug, resulting in zero theoretical skew. 3. controlled termination of individual conductors the termination part of the contact is firmly attached in the molded insulator body. hirose? electric unique design of the metal shield prevents short circuits, allowing the overmold resin to flow in the terminated area. by not using heat shrinkable tubing (or any other additional process), the non-twisted part of the conductors is very short, suppressing any unwanted impedance disturbances in the termination area. 4. ease of mating and handling thin design of the plug assembly and the overmold section allows use in small spaces. the plug also incorporates a build-in snap-lock feature, providing tactile verification of the full and secure mating of plug and receptacle. 5. two types of metal shields two styles of the receptacle metal shield are available, depending on the customer? pcb design requirement: -surface mount termination -solder dip type 6. printed circuit board placement features precise location on the board can be accomplished using receptacle assemblies with or without the positioning boss. 7. board placement with automatic equipment receptacle assemblies are provided with a heat resistant flat surfaces, removable after completion of the soldering process and are supplied on the reels. 8. rohs compliant all components and materials comply with the requirements of the eu directive 2002/95/ec. 9. support of non-halogen cable wiring harness can be arranged in non-halogen cable types. note: non-halogen items are not covered in the current usb 2.0 standard. applications personal and mobile computer peripheral equipment, data terminals, digital cameras, mp3 players, pda?, gps and other devices utilizing standard usb protocols contact no. 3 contact no. 2 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
2 ux series meet requirements of usb 2.0 materials note 1: the over-mold compound is applied at the time of the termination of the plug with the cable and can not be ordered as a separate part. note 2: the over-molding and cables can be supplied in a wide range of colors. please contact your hirose electric account representative for details. plugs receptacles measured at 100 ma measured at 100 v dc 100 v ac / one minute measured at 1000 10hz between adjacent contacts with corresponding connector. 5000 cycles frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 axis. frequency: 50 to 2000 hz, 15 minutes in each of the 3 axis. acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis 168 hours at -10 ? to +65 ? and relative humidity of 90% to 98% 7 cycles exposed to 5% salt water solution for 48 hours soldering temperature: 245 ? recommended solder immersion time: 2 to 3 seconds 50 m ohms max. 100 m ohms min. no flashover or insulation breakdown 2 pf min. mating : 35n max. un-mating : 7n min. contact resistance: 70 m ohms max. un-mating force: 3n min. no electrical discontinuity of 1 ms or more. contact resistance: 70 m ohms max. insulation resistance: 10 m ohms min. (dry state) contact resistance: 70 m ohms max. wet state, with solder coverage area over 95% item specification conditions part insulator contacts metal shield pick-and-place flat plate synthetic resin copper alloy copper alloy polyamide color: black contact area: gold plating termination area: tin alloy plating tin alloy plating --------------- ul94v-0 --------------- --------------- --------------- material finish remarks product specifications ratings current rating 1 a voltage rating 5 v ac operating temperature range - 30 ? to + 75 ? (note 1) temperature: - 55 ? / + 20 ? to +35 ? / + 85 ? / + 20 ? to +35 ? time: - 30 / + 2 to 3 / + 30 / + 2 to 3 (minutes) 10 cycles part insulator contacts metal shield over-mold compound (note 1) synthetic resin copper alloy steel pvc color: black contact area: gold plating termination area: tin alloy plating tin alloy plating black (note 2) ul94v-0 --------------- --------------- --------------- material finish remarks 1.contact resistance 2.insulation resistance 3. dielectric withstanding voltage 4.capacitance 5. mating/un-mating forces 6.durability (mating / un-mating) 7.vibration 8.shock 9.shock 10.thermal shock 11.humidity 12.salt spray 13.solderability the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
3 ux series meet requirements of usb 2.0 ordering information ux 60 a - mb - 5 s t 1 2 4 5 3 6 7 note 1: types with different dip style termination lengths can also be provided. note 2: various cable lengths can be provided. note 3: detailed specifications of the harness items can be supplied. series name ux contact wiring 60: smt type 40: solder wiring type receptacle serial indication a: without positioning post connector type mb: mini b type number of contacts 5 contact type s: female contact p: male contact metal shield termination t: smt type 8: solder dip type (dip length 0.8) (note 1) plug serial indication a: type supporting thick cable reverse side connector type a: standard a type cable length 1000: 1000 mm (note 2) serial number (note 3) 1 2 3 4 5 6 7 8 9 10 11 receptacles ux 40 a - mb - 5 p 1 2 4 5 8 6 plugs ux 40 a - mb - 5 p a - 1000 - 1001 1 2 4 10 11 5 8 6 9 plug harnesses the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
4 ux series meet requirements of usb 2.0 9 0.3 0.8 1.6 0.8 1.6 7.7 9.9 contact no.5 contact no.1 3.5 3.95 0.5 0.8 1.2 2 3.3 1.2 6.4 8.4 3.3 2 1.25 0.4 max. 3.25 3.5 6.4 min. 8.4 0.8 0.8 1.6 1.6 0.5 no conductive traces (no conductive traces) 7.7 min. (no conductive traces) 2.2 2.5 3.5min. ?0.9 (hole) connector outside diameter (no conductive traces) (no conductive traces) b recommended board mounting pattern receptacles metal shield smt type with positioning post part no. cl no. rohs ux60-mb-5st 240-0001-9 yes 9 0.3 0.8 1.6 1.6 0.8 7.7 9.9 3.95 contact no.5 contact no.1 1.2 3.1 8.4 1.2 8.4 3.1 8.4 7.65 6 min. 9.65 8.4 0.8 0.8 1.6 1.6 0.5 no conductive traces 7.7 min. (no conductive traces) (no conductive traces) (no conductive traces) 2.2 2.5 3.5 min. connector outside diameter b recommended board mounting pattern metal shield smt type without positioning post note : embossed tape reel packaging(1,000 pieces/reel) order by the number of reels. note : embossed tape reel packaging(1,000 pieces/reel) order by the number of reels. part no. cl no. rohs ux60a-mb-5st 240-0003-4 yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
5 ux series meet requirements of usb 2.0 note : embossed tape reel packaging(1,000 pieces/reel) order by the number of reels. 9 0.3 0.8 1.6 0.8 1.6 7.7 3.95 0.5 3.5 7.3 0.8 contact no.5 contact no.1 0.8 1.2 1.2 2 3.3 6.4 3.5 min. 0.4 max. ?0.9(hole) 7.3 0.8 0.8 1.6 1.6 0.5 0.8(through hole) 1.7(through hole) r0.4 (through hole) 3.5 7.3 no conductive traces (no conductive traces) (no conductive traces) (no conductive traces) connector outside diameter 3.3 2 1.25 3.25 6.4 min. 7.7 min. (no conductive traces) b recommended board mounting pattern receptacles metal shield dip type with positioning post ( 2 ) ( 1.5 ) ( 25.4 ) 2.3 mni. 1 min. 4.9 0.35 min. 0.65 mni. 1.1 max. 5.6 mni. b drawing of mated assembly - shown for reference b receptacle - recommended clearance area when considering the placement of the receptacle assembly areas indicated should be free of any materials or components which may interfere with the free movement of the ground contact. part no. cl no. rohs UX60-MB-5S8 240-0002-1 yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
6 ux series meet requirements of usb 2.0 note: recommended cable diameters. actual diameters may vary due to manufacturing process variations. contact hirose for recommendations when using cables with different diameters than the recommended. part no. ux40-mb-5p ux40a-mb-5p 240-0004-7 240-0005-0 6.2 7.85 6.95 7.85 ?3.5~4.0 ?4.1~4.6 yes cl no. dimension a dimension b applicable cable (note) rohs 7.45 3 22.7 3 14.4 ( 0.5 ) ( 0.2 ) (a) b contact no.1 contact no.5 (2.4) (0.75) 1.2 2.4 1.2 2.4 connector unit plugs assembly components (non-terminated, without overmold) plug harnesses ( 8.2 ) ( 16.2 ) ( 55 ) ( ?3.9 ) ( 30.9 ) 1000 ( 9.5 ) ( 6.5 ) b part no. cl no. rohs ux40-mb-5pa-1000-2003 240-2003-5 yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
7 ux series meet requirements of usb 2.0 b receptacles packaging specification note: embossed tape reel packaging(1,000 pieces/reel) order by the number of reels. b recommended temperature profile (receptacles) unreeling direction 4 1.4 16 ?1.5 (5.4) (center of pick-and-place surface) 11.5 22.25 1.75 ( 24 ) ( 6.3 ) embossed carrier tape dimensions recommended conditions reflow : ir solder: paste, 96.5 sn/3.0 ag/0.5 cu test board: glass epoxy 35mm 35mm 0.8 mm thick. ( ?13 ) ( ?380 ) unreeling direction ( 24.4 ) ( 30.4 ) reel dimensions average slope 2?/sec. (85?) 17010? 80~110s 230? min. max. 50s 200? min. max. 80s temperature (?) 250 230 200 170 time (sec.) 0 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
|
