specification control drawing te connectivity 300 constitution drive, menlo park, ca. 94025, u.s.a. raychem title: soldersleeve shield terminator unless otherwise specified dimensions are in millim eters. [inches dimensions are shown in brackets] document no.: cwt-xx tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron te connectivity reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. prod. rev.: see table doc. issue: 4 date: 15-apr-11 prepared by: mforonda cage code : 06090 replaces: d020508 dcr number: d040057 scale: --- size: a sheet: 1 of 1 print date: 9-may-11 ? 2011 tyco electronics corporat ion, a te connectivity ltd. company. all rights res erved. if this document is printed it becomes uncontrolled . check with the web for the latest revision. product revisions product dimensions prepared cable dimensions product name ? a min ? b min l max ? d max ? e min ? f min ? g max h j cwt-3 d 2.50 [0.098] 3.00 [0.118] 24.5 [0.965] 3.00 [0.118] 1.50 [0.060] 1.00 [0.040] 2.50 [0.098] 6.0 ? 0.5 [0.2360.020] 7.0 ? 0.5 [0.7260.020] cwt-5 f 4.30 [0.170] 4.80 [0.189] 29.3 [1.154] 4.80 [0.189] 2.00 [0.079] 1.50 [0.059] 4.30 [0.170] 8.0 ? 0.5 [0.3150.020] 9.0 ? 0.5 [0.3540.020] cwt-6 a 6.00 [0.236] 6.70 [0.264] 32.00 [1.260] 6.70 [0.264] 3.30 [0.130] 2.80 [0.110] 6.00 [0.236] 9.0 ? 0.5 [0.3540.020] 10.0 ? 0.5 [0.3940.020] cwt-7 f 6.80 [0.268] 7.30 [0.287] 32.50 [1.280] 7.30 [0.287] 3.30 [0.130] 2.80 [0.110] 6.80 [0.268] 10.0 ? 1.0 [0.3940.040] 11.0 ? 1.0 [0.4330.040] cwt-9 a 8.70 [0.343] 9.20 [0.362] 35.50 [1.398] 9.20 [0.362] 4.50 [0.177] 4.00 [0.157] 8.70 [0.343] 11.0 ? 1.0 [0.4330.040] 12.0 ? 1.0 [0.4720.040] cwt-11 e 10.80 [0.425] 11.50 [0.453] 35.50 [1.398] 11.50 [0.453] 4.50 [0.177] 4.00 [0.157] 10.80 [0.425] 12.0 ? 1.0 [0.4720.040] 13.0 ? 1.0 [0.5120.040] CWT-13 a 13.00 [0.512] 15.10 [0.594] 45.50 [1.791] 15.10 [0.594] 7.00 [0.276] 6.50 [0.256] 13.00 [0.512] 16.0 ? 1.0 [0.6300.040] 17.0 ? 1.0 [0.6700.040] materials 1. insulation sleeve: heat-shrinkable, radiation c ross-linked modified polyolefin. color: transparent clear. 2. solder preform with flux: solder: type cd18 per ansi/j-std-006. flux: type rom1 per ansi/j-std-004. 3. meltable sealing ring: thermally stabilized ther moplastic. color: blue (size 3, 5, 6, 7, 9, 11); n atural (size 13) 4. meltable sealing ring: thermally stabilized ther moplastic. color: blue (size 3, 5, 7, 11); gray (s ize 6); natural (size 9, 13) application 1. these controlled soldering devices are designed for termination of a bare or tin-plated copper shie ld on a cable having an insulation rated for at least +85 ? c, meeting the dimensional criteria listed in the t able above. 2. temperature range: -55 ? c to +125 ? c. 3. when installed properly, it will meet the requir ements of te connectivity / raychem specification r t-1404. 4. for installation procedure and application equip ment consult te connectivity / raychem document rpi p-824-00. for best results, prepare the cable as shown:
|