csp????c factsheet f-200 supplement samtec usa ?tel: 1-800-samtec-9 or 812-944-6733 ?fax: 812-948-5047 samtec uk ?tel: 01236 739292 ?fax: 01236 727113 samtec asia pacific ?tel: 65-745-5955 ?fax: 65-841-1502 samtec germany ?tel: +49 (0) 89 / 89460-0 ?fax: +49 (0) 89 / 89460-299 samtec france ?tel: 01 60 95 06 60 ?fax: 01 60 95 06 61 samtec italy ?tel: 39 039 6890337 ?fax: 39 039 6890315 samtec japan ?tel: 81-424-42-8318 ?fax: 81-424-42-8319 samtec china ?tel: 86-21-5385-4089 ?fax: 86-21-5385-4047 samtec taiwan ?tel: (02) 2395-1677 ?fax: (02) 2395-1689 due to technical progress, all designs, specifications and components are subject to change without notice. mates with: css to csp, css/25 to csp/25, ss, ts, sl specifications: css insulator material: black glass filled polyester flammability rating: ul 94v-o i nsulation resistance: 5000 m ? min temperature range: -20 c to +80 c withstanding voltage: 1000 vrms @ 60 hz contact: becu shell: brass plating: au over 50 " (1,27 m) ni or sn over 100 " (2,54 m) cu or 50 " (1,27 m) ni current rating: 1a contact resistance: 10m ? max lead size range: .015" (0,38mm) to .022" (0,56mm) dia and most ic leads lead insertion depth: .095" (2,41mm) to .150" (3,81mm) insertion force : 9 oz (2,50n) avg, 16 oz (4,45n) max (.017" (0,43mm) dia probe) withdrawal force : 2.5 oz (0,70n) avg, 1.5 oz (0,41n) min (after 12 insertions with .017" (0,43mm) dia probe) wire : 26 awg 7/34 standard tinned copper specifications: css/25 same as css except: contact: phosphor bronze lead insertion depth: .050" (1,27mm) to .165" (4,19mm) insertion force : 3.0 oz (0,83n) avg (.018" (0,46mm) dia probe) withdrawal force : 1.5 oz (0,41n) avg (.018" (0,46mm) dia probe) wire : 26 awg 7/34 standard tinned copper specifications: csp, csp/25 same as css except: terminal: brass other option type assembly no. of conductors end assembly combination type cable length 5, ?5, ?0, ?0 xx = length in inches note: these series are non-standard, non-returnable. combination specify combination type only if socket-plug combination is required. begin part number with csp or csp/25 csp/25 not available 1/8" 1/4" 1/2" 3/8" ?c ?p ?5 ?5 = cable strip socket (css) = cable strip plug (csp) = .025 sq csp (csp/25) = .025 sq css (css/25) ? = reversed double right angle ? = single end ? = double end css = cable strip socket csp = cable strip plug body width 5 conductors = (13,21) .520 10 conductors = (25,91) 1.020 15 conductors = (38,61) 1.520 20 conductors = (51,31) 2.020 cable length (7,62) .300 cable length accepts thru dia pins (0,38) .015 (7,62) .300 (3,17) .125 (4,83) .190 (3,05) .120 (0,51) .020 dia (0,56) .022 (0,76) .030 pin 1 (brown wire) (2,54) .100 csp/25 = .025 sq csp css/25 = .025 sq css (4,06) .160 ref (8,89) .350 ref (7,62) .300 (3,18) .125 (4,57) .018 cable length ?x 5"max. 2"min. call samtec for other sizes cable width 5 conductors = (12,70) .500 10 conductors = (25,40) 1.000 15 conductors = (38,10) 1.500 20 conductosr = (50,80) 2.000 cable length (7,62) .300 (6,60) .260 (8,20) .323 (3,05) .120 (10,92) .430 cable length accepts pins (0,64) .025 (0,64) .025 sq pin 1 (brown wire) (2,54) .100 length whole inches 2 inches minimum (1/8") breakout starts with number 1 lead indicated by brown wire or red strip. ? ?x = polarized ? = double right angle css & csp series st8 st4 st2 st3 = specify suffix from table. all dimensions are 1/16". specify xx as number of conductors to be broken out . ?t ? = stripped & tinned ? ?x = breakout single right angle ? soldered .100" (2,54 mm) strips
|