.062(1.58) .050(1.27) .012(.31) .006(.15) .008(.20) .004(.10) .056(1.41) .035(0.90) .187(4.75) .160(4.06) .210(5.33) .195(4.95) .111(2.83) .090(2.29) .091(2.30) .078(1.99) SS115 1.0 amp. surface mount schottky barrier rectifiers voltage range 150 volts current 1.0 ampere features for surface mounted application metal to silicon rectifier, majority carrier conduction low forward voltage drop easy pick and place high surge current capability plastic material used carriers underwriters laboratory classification 94v-o epitaxial construction high temperature soldering: 260 o c/ 10 seconds at terminals mechanical data case: molded plastic terminals: solder plated polarity: indicated by cathode band packaging: 12mm tape per eia std rs-481 weight: 0.064 gram sma/do-214ac dimensions in inches and (millimeters) maximum ratings and electrical characteristics rating at 25 ambient temperature unless otherwise specified. single phase, half wave, 60 hz , resistive or inductive load. for capacitive load, derate current by 20% type number symbol SS115 units maximum recurrent peak reverse voltage v rrm 150 v maximum rms voltage v rms 105 v maximum dc blocking voltage v dc 150 v maximum average forward rectified current at t l (see fig. 1) i (av) 1.0 a peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load (jedec method ) i fsm 30 a maximum instantaneous forward voltage (note 1) @ 25 o c 1.0a @ 125 o c 1.0a @ 25 o c 2.0a @ 125 o c 2.0a v f 0.82 0.67 0.89 0.75 v 0.05 maximum dc reverse current @ t a =25 at rated dc blocking voltage @ t a =125 i r 0.5 ma ma typical junction capacitance (note 3) cj 50 pf typical thermal resistance ( note 2 ) r jl 20 /w operating temperature range t j -65 to +150 storage temperature range t stg -65 to +150 notes : 1. pulse test with pw=300 usec, 1% duty cycle 2. measured on p.c.board with 0.2 x 0.2?(5.0 x 5.0mm) copper pad areas. 3. measured at 1 mhz and a pp lied reverse volta g e of 4.0v d.c http://www.luguang.cn mail:lge@luguang.cn
fig.2- maximum non-repetitive forward surge current peak forward surge current. (a) 1 10 100 0 10 20 40 30 50 number of cycles at 60hz at rated tl 8.3ms single half sine wave jedec method fig.1- maximum forward current derating curve average for ward current . (a) 50 60 70 80 90 100 110 120 170 160 150 140 130 0 .50 1.0 lead temperature. ( c) o resistive or inductive load pcb mounted on 0.2x0.2" (5.0x5.0mm) copper pad areas fig.3- typical forward characteristics instantaneous for ward current . (a) 0 .2 .4 .6 .8 1.0 1.2 1.4 1.6 0.01 0.1 1 10.0 50 forward voltage. (v) tj=125 c 0 tj=25 c 0 pulse width=300 s 1% duty cycle fig.4- typical reverse characteristics instantaneous reverse current . (ma) 0 20 40 60 80 100 120 140 0.001 0.01 0.1 1 10 100 percent of rated peak reverse voltage. (%) tj=125 c 0 tj=25 c 0 fig.5- typical junction capacitance junction cap acitance.(pf) .1 1.0 10 100 10 100 400 reverse voltage. (v) tj=25 c f=1.0mhz vsig=50mvp-p 0 http://www.luguang.cn mail:lge@luguang.cn ratingsandcharacteristiccurves(SS115)
|
