vj....w1bc ultra small series 0201 www.vishay.com vishay revision: 11-jul-13 1 document number: 28538 for technical questions, contact: mlcc@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 surface mount multilayer ceramic chip capacitors for ultra small commodity applications features ? high capacitance in unit size ? high precision dimensional tolerances ? suitably used in high-accuracy automatic mounting machine ? dry sheet manufacturing technology ? noble metal electrode system (nme) for c0g (np0) ? base metal electrode system (bme) for x5r, x7r ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? miniature microwave module ? portable equipment - mobile phone, pda ? high frequency circuits notes (1) measured at 30 % ~ 70 % related humidity ? np0: apply 1.0 v rms 0.2 v rms , 1.0 mhz 10 % at the conditions of 25 c ambient temperature ? x7r, x5r: apply 1.0 v rms 0.2 v rms , 1.0 khz 10 % at the conditions of 25 c ambient temperature (2) preconditioning for x5r, x7r mlcc: perform a heat treatment at 150 c 10 c for 1 h, then leave in ambient condition for 24 h 2 h before measurement. electrical specifications size 0201 dielectric c0g (np0) x7r x5r capacitance 0.5 pf to 100 pf 100 pf to 10 nf 100 pf to 220 nf capacitance tolerance (2) cap. ? 5 pf: b ( 0.1 pf), c ( 0.25 pf) 5 pf < cap. < 10 pf: c ( 0.25 pf), d ( 0.5 pf) cap. ? 10 pf: f ( 1 %), g (2 %), j (5 %), k = ( 10 %) j ( 5 %) k ( 10 %) m ( 20 %) j ( 5 %) k ( 10 %) m ( 20 %) rated voltage (v dc ) 16 v, 25 v, 50 v 10 v, 16 v, 50 v 6.3 v, 10 v, 16 v, 50 v tan ? /q (1) cap. < 30 pf, q ? 400 + 20 c cap. ? 30 pf, q ? 1000 10 v ? 5 % 16 v: ? 3.5 % 50 v: ? 3.0 % 6.3 v: ? 10 % 10 v: ? 5.0 % 16 v: ? 3.5 % 50 v: ? 3.0 % insulation resistance at u r ? 10 g ?? 10 g ? or r x c ? 500 ? f, whichever is less operating temperature - 55 c to + 125 c - 55 % to + 85 c capacitance change 30 ppm 15 % termination ni/sn lead (pb)-free termination
vj....w1bc ultra small series 0201 www.vishay.com vishay revision: 11-jul-13 2 document number: 28538 for technical questions, contact: mlcc@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? detail ratings see sel ection chart table note (1) detail tolerance see under electrical specifications table quick reference data dielectric case maximum voltage (v) capacitance minimum maximum c0g (np0) 0201 50 0.5 pf 100 pf x7r 0201 50 100 pf 10 nf x5r 0201 50 100 pf 220 nf ordering information vj0201 a 100 j x x c w1bc size code dielectric capacitance tolerance (1) termination rated voltage packaging process code for basic commodity 0201 a = c0g (np0) y = x7r g = x5r two significant digits followed by the number of zeros. r is in place of decimal point: 0r5 = 0.5 pf 1r0 = 1.0 pf 100 = 10 pf b = 0.10 pf c = 0.25 pf d = 0.5 pf f = 1 % g = 2 % j = 5 % k = 10 % m = 20 % x = ni barrier y = 6.3 v q = 10 v j = 16 v x = 25 v a = 50 v c = 7" reel/ paper tape dimensions in inches (millimeters) size code l w t max. mb 0201 (0603) 0.024 0.0012 (0.60 ?? 0.03) 0.012 0.0012 (0.30 ?? 0.03) 0.013 (0.33) 0.006 0.002 (0.15 0.05) t l mb mb w
vj....w1bc ultra small series 0201 www.vishay.com vishay revision: 11-jul-13 3 document number: 28538 for technical questions, contact: mlcc@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? letters indicate product thickn ess, see packaging quantities (1) only in 20 % (code m) tolerance selection chart dielectric c0g (np0) x7r x5r style vj0201 size code 0201 voltage v dc 16 v 25 v 50 v 10 v 16 v 50 v 6.3 v 10 v 16 v 50 v voltage code j x a q j a y q j a cap. code cap. 0r5 0.5 pf l l 1r0 1.0 pf l l 1r2 1.2 pf l l 1r5 1.5 pf l l 1r8 1.8 pf l l 2r2 2.2 pf l l 2r7 2.7 pf l l 3r3 3.3 pf l l 3r9 3.9 pf l l 4r7 4.7 pf l l 5r6 5.6 pf l l 6r8 6.8 pf l l 8r2 8.2 pf l l 100 10 pf l l 120 12 pf l l 150 15 pf l l 180 18 pf l l 220 22 pf l l 270 27 pf l l 330 33 pf l l 390 39 pf l l 470 47 pf l l 560 56 pf l l 680 68 pf l l 820 82 pf l l 101 100 pf l l l l l 121 120 pf l l l 151 150 pf l l l 181 180 pf l l l 221 220 pf l l l 271 270 pf l l l 331 330 pf l l l 391 390 pf l l l 471 470 pf l l l 561 560 pf l l l 681 680 pf l l l 821 820 pf l l l 102 1000 pf l l l l l 152 1500 pf l l l l 222 2200 pf l l l l 332 3300 pf l l l l 472 4700 pf l l l l 682 6800 pf l l 103 0.010 f l l 153 0.015 f l 223 0.022 f l 333 0.033 f l 473 0.047 f l 683 0.068 f l 104 0.10 f ll 224 0.22 f l (1)
vj....w1bc ultra small series 0201 www.vishay.com vishay revision: 11-jul-13 4 document number: 28538 for technical questions, contact: mlcc@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 paper tape specifications reel specification packaging quantities size code ? (inch/mm) thickness (mm) paper tape 7" reel (c) 13" reel (p) 0201 (0603) 0.30 0.03 15k - f w p 0 p 2 d 0 b 0 a 0 p 1 e dimensions of paper tape ? in millimeters symbol product size code 0201 a 0 0.38 0.05 b 0 0.68 0.05 w 8.00 0.10 e 1.75 0.05 f 3.50 0.05 d 0 1.55 0.05 p 0 4.00 0.10 p 1 2.00 0.05 p 2 2.00 0.05 b a d c reel dimensions and tape width ? in millimeters symbol ? 180 mm; 7" ? 330 mm; 13" a 13.0 0.5 13.0 0.5 b 9.0 1.0 9.0 1.0 c 178.0 1.0 330.0 1.0 d 60.0 1.0 100.0 1.0
vj....w1bc ultra small series 0201 www.vishay.com vishay revision: 11-jul-13 5 document number: 28538 for technical questions, contact: mlcc@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 construction no. name c0g (np0) x5r, x7r 1 ceramic material batio 3 based 2 inner electrode agpd alloy ni 3 termination inner layer ag cu 4 middle layer ni 5 outer layer sn (matt) storage and handling conditions (1) to store products at 5 c to 40 c ambient te mperature and 20 % to 70 % related humidity conditions. ? (2) the product is recommended to be used within one year after shipment. check solderability in case of shelf life extension i s needed. ? ? cautions: ? a. do not store products in a corrosive environment such as sulfide, chloride gas, or acid. it may cause oxidization of elect rode, which easily be resulted in poor soldering. ? b. to store products on the sh elf and avoid exposure to moisture. ? c. do not expose products to excessive shock, vibration, direct sunlig ht and so on. 1 2 3 4 5
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
