01/2005 47 r60 mkt series metallized polyester film capacitor d.c. multipurpose applications typical applications: blocking, coupling, decoupling, by-passing, interference suppression in low voltage applications (i.e.: automotive). product code: r60 note: special version, in compliance with din 44122 is available upon request. construction: ? stacked technology for pitch 10mm (rated voltage from 63 to 630vdc) ? wound technology from pitch 10 to 27.5mm (rated voltage from 63 to 1000vdc) loose taped fig.1 fig. 2 product code system the part number, comprising 14 digits, is formed as follows: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 r 6 0 - digit 1 to 3 series code. digit 4 d.c. rated voltage: d = 63v e = 100v g = 160v i = 250v m = 400v p = 630v q = 1000v digit 5 pitch: f=10mm; i=15mm; n=22.5mm; r=27.5mm; w=37.5mm digit 6 to 9 digits 7 - 8 - 9 indicate the f rst three digits of capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the rated capacitance in pf. digit 10 to 11 mechanical version and/or packaging (table1) digit 12 identif es the dimensions and electrical characteristics. digit 13 internal use digit 14 capacitance tolerance: j=5%; k=10%; m=20%. ?d 0.05 p = 10 p = 10 p >10 p >10 0.6 0.8 all dimensions are in mm. table 1 (for more detailed information, please refer to page 14 ) standard packaging style lead length taping style ordering code (mm) (mm) p 2 (mm) (mm) fig. (no.) pitch (mm) (mm) (digit 10 to 11) ammo-pack 12.70 1 10.0/15.0 dq ammo-pack 19.05 2 22.5 dq reel ? 355mm 12.70 1 10.0/15.0 gy reel ? 500mm 12.70 1 10.0/15.0 ck reel ? 500mm 19.05 2 22.5/27.5 ck loose, short leads 4 +2 aa loose, long leads (p=10mm) 17 +1/-2 z3 loose, long leads (p 15mm) 30 +5 25 +2/-1 40 50 note: ammo-pack is the preferred packaging for taped version. general technical data dielectric: polyester f lm (polyethylene terephthalate). plates: aluminium layer deposited by evaporation under vacuum. winding: non-inductive type. leads: tinned wire. protection: plastic case, thermosetting resin f lled. box material is solvent resistant and f ame retardant according to ul94 v0. marking: manufacturers logo, capacitance, tolerance, d.c. rated voltage. climatic category: 55/105/56 iec 60068-1 operating temperature range: -55 to +105c for stacked technology an upper operating temperature of +125c is allowed for a max.operating time of 1000h. related documents: iec 60384-2 single sided metallized polyester f lm winding scheme pitch box thickness (b) maximum dimensions (mm) (mm) (mm) b max h max l max 10.0 all b +0.2 h +0.1 l +0.2 15.0 <7.5 b +0.2 h +0.1 l +0.3 15.0 7.5 b +0.2 h +0.1 l +0.5 22.5 all b +0.2 h +0.1 l +0.3 27.5 all b +0.2 h +0.1 l +0.3 37.5 all b +0.3 h +0.1 l +0.3
01/2005 4 8 r60 mkt series metallized polyester film capacitor d.c. multipurpose applications product code: r60 stacked version rated cap. 63vdc/40vac std dimensions max dv/dt max k 0 part number b h l p (v/s) (v 2 /s) 1.0 f 4.0 9.0 13.0 10.0 50 6.3 e3 r60df 4100 -- 6 -- 1.5 f 5.0 11.0 13.0 10.0 50 6.3 e3 r60df 4150 -- 6 -- 2.2 f 5.0 11.0 13.0 10.0 50 6.3 e3 r60df 4220 -- 6 -- 3.3 f 6.0 12.0 13.0 10.0 50 6.3 e3 r60df 4330 -- 6 -- rated cap. 100vdc/63vac std dimensions max dv/dt max k 0 part number b h l p (v/s) (v 2 /s) 0.33 f 4.0 9.0 13.0 10.0 75 15 e3 r60ef 3330 -- 6 -- 0.47 f 4.0 9.0 13.0 10.0 75 15 e3 r60ef 3470 -- 6 -- 0.68 f 4.0 9.0 13.0 10.0 75 15 e3 r60ef 3680 -- 6 -- 1.0 f 5.0 11.0 13.0 10.0 75 15 e3 r60ef 4100 -- 6 -- 1.5 f 5.0 11.0 13.0 10.0 75 15 e3 r60ef 4150 -- 6 -- rated cap. 160vdc/90vac std dimensions max dv/dt max k 0 part number b h l p (v/s) (v 2 /s) 0.22 f 4.0 9.0 13.0 10.0 100 32 e3 r60gf 3220 -- 6 -- 0.33 f 4.0 9.0 13.0 10.0 100 32 e3 r60gf 3330 -- 6 -- 0.47 f 5.0 11.0 13.0 10.0 100 32 e3 r60gf 3470 -- 6 -- 0.68 f 6.0 12.0 13.0 10.0 100 32 e3 r60gf 3680 -- 6 -- rated cap. 250vdc/160vac std dimensions max dv/dt max k 0 part number b h l p (v/s) (v 2 /s) 0.10 f 4.0 9.0 13.0 10.0 150 75 e3 r60if 3100 -- 6 -- 0.15 f 4.0 9.0 13.0 10.0 150 75 e3 r60if 3150 -- 6 -- 0.22 f 5.0 11.0 13.0 10.0 150 75 e3 r60if 3220 -- 6 -- 0.33 f 5.0 11.0 13.0 10.0 150 75 e3 r60if 3330 -- 6 -- 0.47 f 6.0 12.0 13.0 10.0 150 75 e3 r60if 3470 -- 6 -- rated cap. 400vdc/200vac std dimensions max dv/dt max k 0 part number b h l p (v/s) (v 2 /s) 0.033 f 4.0 9.0 13.0 10.0 175 140 e3 r60f 2330 -- 6 -- 0.047 f 4.0 9.0 13.0 10.0 175 140 e3 r60f 2470 -- 6 -- 0.068 f 4.0 9.0 13.0 10.0 175 140 e3 r60f 2680 -- 6 -- 0.10 f 5.0 11.0 13.0 10.0 175 140 e3 r60f 3100 -- 6 -- 0.15 f 6.0 12.0 13.0 10.0 175 140 e3 r60f 3150 -- 6 -- rated cap. 630vdc/220*vac std dimensions max dv/dt max k 0 part number b h l p (v/s) (v 2 /s) 0.010 f 4.0 9.0 13.0 10.0 200 250 e3 r60pf 2100 -- 6 -- 0.015 f 4.0 9.0 13.0 10.0 200 250 e3 r60pf 2150 -- 6 -- 0.022 f 4.0 9.0 13.0 10.0 200 250 e3 r60pf 2220 -- 6 -- 0.033 f 5.0 11.0 13.0 10.0 200 250 e3 r60pf 2330 -- 6 -- 0.047 f 5.0 11.0 13.0 10.0 200 250 e3 r60pf 2470 -- 6 -- all dimensions are in mm. note: if the working voltage (v) is lower than the rated voltage (v r ), the capacitor may work at higher dv/dt. in this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio v r /v. the pulse characteristic k 0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. *not suitable for across-the-line applications. please refer to interference suppression capacitors (page 167). mechanical version and packaging (table1) internal use tolerance: j (5%); k (10%); m (20%) mechanical version and packaging (table1) internal use tolerance: j (5%); k (10%); m (20%)
01/2005 49 r60 mkt series metallized polyester film capacitor d.c. multipurpose applications product code: r60 wound version note: if the working voltage (v) is lower than the rated voltage (v r ), the capacitor may work at higher dv/dt. in this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio v r /v. the pulse characteristic k 0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. rated cap. 63vdc/40vac std dimensions max dv/dt max k 0 part number b h l p (v/s) (v 2 /s) 0.68 f 5.0 11.0 18.0 15.0 2.5 0.32 e3 r60di 3680 -- 3 -- 1.0 f 5.0 11.0 18.0 15.0 2.5 0.32 e3 r60di 4100 -- 3 -- 1.5 f 5.0 11.0 18.0 15.0 2.5 0.32 e3 r60di 4150 -- 3 -- 2.2 f 6.0 12.0 18.0 15.0 2.5 0.32 e3 r60di 4220 -- 3 -- 3.3 f 7.5 13.5 18.0 15.0 2.5 0.32 e3 r60di 4330 -- 3 -- 3.3 f 9.0 12.5 18.0 15.0 2.5 0.32 e3 r60di 4330 -- l -- 4.7 f 8.5 14.5 18.0 15.0 2.5 0.32 e3 r60di 4470 -- 3 -- 4.7 f 13.0 12.0 18.0 15.0 2.5 0.32 e3 r60di 4470 -- l -- 6.8 f 10.0 16.0 18.0 15.0 2.5 0.32 e3 r60di 4680 -- 3 -- 3.3 f 6.0 15.0 26.5 22.5 1.5 0.19 e3 r60dn4330 -- 3 -- 4.7 f 7.0 16.0 26.5 22.5 1.5 0.19 e3 r60dn4470 -- 3 -- 6.8 f 7.0 16.0 26.5 22.5 1.5 0.19 e3 r60dn4680 -- 3 -- 10.0 f 8.5 17.0 26.5 22.5 1.5 0.19 e3 r60dn5100 -- 3 -- 15.0 f 11.0 20.0 26.5 22.5 1.5 0.19 e3 r60dn5150 -- 3 -- 10.0 f 9.0 17.0 32.0 27.5 1.0 0.13 e3 r60dr5100 -- 3 -- 15.0 f 9.0 17.0 32.0 27.5 1.0 0.13 e3 r60dr5150 -- 4 -- 22.0 f 11.0 20.0 32.0 27.5 1.0 0.13 e3 r60dr5220 -- 4 -- 33.0 f 13.0 22.0 32.0 27.5 1.0 0.13 e3 r60dr5330 -- 4 -- 47.0 f 14.0 28.0 32.0 27.5 1.0 0.13 e3 r60dr5470 -- 4 -- 68.0 f 18.0 33.0 32.0 27.5 1.0 0.13 e3 r60dr5680 -- 4 -- 100.0 f 22.0 37.0 32.0 27.5 1.0 0.13 e3 r60dr6100 -- 0 -- 22.0 f 11.0 22.0 41.5 37.5 0.8 0.10 e3 r60dw5220 -- 3 -- 33.0 f 11.0 22.0 41.5 37.5 0.8 0.10 e3 r60dw5330 -- 4 -- 47.0 f 13.0 24.0 41.5 37.5 0.8 0.10 e3 r60dw5470 -- 4 -- 68.0 f 19.0 32.0 41.5 37.5 0.8 0.10 e3 r60dw5680 -- 3 -- 100.0 f 19.0 32.0 41.5 37.5 0.8 0.10 e3 r60dw6100 -- 4 -- 150.0 f 20.0 40.0 41.5 37.5 0.8 0.10 e3 r60dw6150 -- 0 -- 220.0 f 24.0 44.0 41.5 37.5 0.8 0.10 e3 r60dw6220 -- 0 -- rated cap. 100vdc/63vac std dimensions max dv/dt max k 0 part number b h l p (v/s) (v 2 /s) 0.33 f 5.0 11.0 18.0 15.0 3.0 0.6 e3 r60ei 3330 -- 3 -- 0.47 f 5.0 11.0 18.0 15.0 3.0 0.6 e3 r60ei 3470 -- 3 -- 0.68 f 5.0 11.0 18.0 15.0 3.0 0.6 e3 r60ei 3680 -- 3 -- 1.0 f 5.0 11.0 18.0 15.0 3.0 0.6 e3 r60ei 4100 -- 3 -- 1.5 f 7.5 13.5 18.0 15.0 3.0 0.6 e3 r60ei 4150 -- 3 -- 2.2 f 8.5 14.5 18.0 15.0 3.0 0.6 e3 r60ei 4220 -- 3 -- 2.2 f 9.0 12.5 18.0 15.0 3.0 0.6 e3 r60ei 4220 -- l -- 3.3 f 10.0 16.0 18.0 15.0 3.0 0.6 e3 r60ei 4330 -- 3 -- 3.3 f 13.0 12.0 18.0 15.0 3.0 0.6 e3 r60ei 4330 -- l -- 4.7 f 11.0 19.0 18.0 15.0 3.0 0.6 e3 r60ei 4470 -- 3 -- 1.5 f 6.0 15.0 26.5 22.5 2.0 0.4 e3 r60en 4150 -- 3 -- 2.2 f 6.0 15.0 26.5 22.5 2.0 0.4 e3 r60en 4220 -- 3 -- 3.3 f 7.0 16.0 26.5 22.5 2.0 0.4 e3 r60en 4330 -- 3 -- 4.7 f 8.5 17.0 26.5 22.5 2.0 0.4 e3 r60en 4470 -- 3 -- 6.8 f 10.0 18.5 26.5 22.5 2.0 0.4 e3 r60en 4680 -- 3 -- 10.0 f 13.0 22.0 26.5 22.5 2.0 0.4 e3 r60en 5100 -- 3 -- 4.7 f 9.0 17.0 32.0 27.5 1.5 0.3 e3 r60er 4470 -- 3 -- 6.8 f 9.0 17.0 32.0 27.5 1.5 0.3 e3 r60er 4680 -- 3 -- 10.0 f 9.0 17.0 32.0 27.5 1.5 0.3 e3 r60er 5100 -- 4 -- 15.0 f 11.0 20.0 32.0 27.5 1.5 0.3 e3 r60er 5150 -- 4 -- 22.0 f 13.0 22.0 32.0 27.5 1.5 0.3 e3 r60er 5220 -- 4 -- 33.0 f 14.0 28.0 32.0 27.5 1.5 0.3 e3 r60er 5330 -- 4 -- 47.0 f 18.0 33.0 32.0 27.5 1.5 0.3 e3 r60er 5470 -- 4 -- 68.0 f 22.0 37.0 32.0 27.5 1.5 0.3 e3 r60er 5680 -- 0 -- 15.0 f 11.0 22.0 41.5 37.5 1.0 0.2 e3 r60ew5150 -- 4 -- 22.0 f 11.0 22.0 41.5 37.5 1.0 0.2 e3 r60ew5220 -- 4 -- 33.0 f 13.0 24.0 41.5 37.5 1.0 0.2 e3 r60ew5330 -- 4 -- 47.0 f 16.0 28.5 41.5 37.5 1.0 0.2 e3 r60ew5470 -- 4 -- 68.0 f 19.0 32.0 41.5 37.5 1.0 0.2 e3 r60ew5680 -- 5 -- 100.0 f 20.0 40.0 41.5 37.5 1.0 0.2 e3 r60ew6100 -- 0 -- 150.0 f 24.0 44.0 41.5 37.5 1.0 0.2 e3 r60ew6150 -- 0 -- rated cap. 160vdc/90vac std dimensions max dv/dt max k 0 part number b h l p (v/s) (v 2 /s) 0.33 f 5.0 11.0 18.0 15.0 9.0 2.90 e3 r60gi 3330 -- 3 -- 0.47 f 5.0 11.0 18.0 15.0 9.0 2.90 e3 r60gi 3470 -- 3 -- 0.68 f 5.0 11.0 18.0 15.0 9.0 2.90 e3 r60gi 3680 -- 3 -- 1.0 f 7.5 13.5 18.0 15.0 9.0 2.90 e3 r60gi 4100 -- 3 -- 1.5 f 8.5 14.5 18.0 15.0 9.0 2.90 e3 r60gi 4150 -- 3 -- 1.5 f 9.0 12.5 18.0 15.0 9.0 2.90 e3 r60gi 4150 -- l -- 2.2 f 10.0 16.0 18.0 15.0 9.0 2.90 e3 r60gi 4220 -- 3 -- 2.2 f 13.0 12.0 18.0 15.0 9.0 2.90 e3 r60gi 4220 -- l -- 3.3 f 11.0 19.0 18.0 15.0 9.0 2.90 e3 r60gi 4330 -- 3 -- 1.5 f 6.0 15.0 26.5 22.5 5.5 1.70 e3 r60gn4150 -- 3 -- 2.2 f 7.0 16.0 26.5 22.5 5.5 1.70 e3 r60gn4220 -- 3 -- 3.3 f 8.5 17.0 26.5 22.5 5.5 1.70 e3 r60gn4330 -- 3 -- 4.7 f 11.0 20.0 26.5 22.5 5.5 1.70 e3 r60gn4470 -- 3 -- 6.8 f 13.0 22.0 26.5 22.5 5.5 1.70 e3 r60gn4680 -- 3 -- 3.3 f 9.0 17.0 32.0 27.5 3.0 0.96 e3 r60gr4330 -- 3 -- 4.7 f 9.0 17.0 32.0 27.5 3.0 0.96 e3 r60gr4470 -- 3 -- 6.8 f 9.0 17.0 32.0 27.5 3.0 0.96 e3 r60gr4680 -- 4 -- 10.0 f 9.0 17.0 32.0 27.5 3.0 0.96 e3 r60gr5100 -- 4 -- 15.0 f 11.0 20.0 32.0 27.5 3.0 0.96 e3 r60gr5150 -- 4 -- 22.0 f 13.0 22.0 32.0 27.5 3.0 0.96 e3 r60gr5220 -- 4 -- 33.0 f 14.0 28.0 32.0 27.5 3.0 0.96 e3 r60gr5330 -- 0 -- 47.0 f 18.0 33.0 32.0 27.5 3.0 0.96 e3 r60gr5470 -- 0 -- 68.0 f 22.0 37.0 32.0 27.5 3.0 0.96 e3 r60gr5680 -- 0 -- 10.0 f 11.0 22.0 41.5 37.5 2.0 0.64 e3 r60gw5100 -- 3 -- 15.0 f 11.0 22.0 41.5 37.5 2.0 0.64 e3 r60gw5150 -- 4 -- 22.0 f 11.0 22.0 41.5 37.5 2.0 0.64 e3 r60gw5220 -- 4 -- 33.0 f 13.0 24.0 41.5 37.5 2.0 0.64 e3 r60gw5330 -- 4 -- 47.0 f 16.0 28.5 41.5 37.5 2.0 0.64 e3 r60gw5470 -- 4 -- 68.0 f 19.0 32.0 41.5 37.5 2.0 0.64 e3 r60gw5680 -- 0 -- 100.0 f 20.0 40.0 41.5 37.5 2.0 0.64 e3 r60gw6100 -- 0 -- 150.0 f 30.0 45.0 41.5 37.5 2.0 0.64 e3 r60gw6150 -- 0 -- rated cap. 250vdc/160vac std dimensions max dv/dt max k 0 part number b h l p (v/s) (v 2 /s) 0.10 f 5.0 11.0 18.0 15.0 12 6.0 e3 r60ii 3100 -- 3 -- 0.15 f 5.0 11.0 18.0 15.0 12 6.0 e3 r60ii 3150 -- 3 -- 0.22 f 5.0 11.0 18.0 15.0 12 6.0 e3 r60ii 3220 -- 3 -- 0.33 f 5.0 11.0 18.0 15.0 12 6.0 e3 r60ii 3330 -- 3 -- 0.47 f 6.0 12.0 18.0 15.0 12 6.0 e3 r60ii 3470 -- 3 -- 0.68 f 7.5 13.5 18.0 15.0 12 6.0 e3 r60ii 3680 -- 3 -- 0.68 f 9.0 12.5 18.0 15.0 12 6.0 e3 r60ii 3680 -- l -- 1.0 f 8.5 14.5 18.0 15.0 12 6.0 e3 r60ii 4100 -- 3 -- 1.0 f 13.0 12.0 18.0 15.0 12 6.0 e3 r60ii 4100 -- l -- 1.5 f 10.0 16.0 18.0 15.0 12 6.0 e3 r60ii 4150 -- 3 -- 0.47 f 6.0 15.0 26.5 22.5 8 4.0 e3 r60in 3470 -- 3 -- 0.68 f 6.0 15.0 26.5 22.5 8 4.0 e3 r60in 3680 -- 3 -- 1.0 f 6.0 15.0 26.5 22.5 8 4.0 e3 r60in 4100 -- 3 -- 1.5 f 7.0 16.0 26.5 22.5 8 4.0 e3 r60in 4150 -- 3 -- 2.2 f 10.0 18.5 26.5 22.5 8 4.0 e3 r60in 4220 -- 3 -- 3.3 f 11.0 20.0 26.5 22.5 8 4.0 e3 r60in 4330 -- 3 -- 1.5 f 9.0 17.0 32.0 27.5 5 2.5 e3 r60ir 4150 -- 3 -- 2.2 f 9.0 17.0 32.0 27.5 5 2.5 e3 r60ir 4220 -- 3 -- 3.3 f 9.0 17.0 32.0 27.5 5 2.5 e3 r60ir 4330 -- 4 -- 4.7 f 9.0 17.0 32.0 27.5 5 2.5 e3 r60ir 4470 -- 4 -- 6.8 f 11.0 20.0 32.0 27.5 5 2.5 e3 r60ir 4680 -- 4 -- 10.0 f 13.0 22.0 32.0 27.5 5 2.5 e3 r60ir 5100 -- 4 -- 15.0 f 14.0 28.0 32.0 27.5 5 2.5 e3 r60ir 5150 -- 4 -- 22.0 f 18.0 33.0 32.0 27.5 5 2.5 e3 r60ir 5220 -- 0 -- 33.0 f 22.0 37.0 32.0 27.5 5 2.5 e3 r60ir 5330 -- 0 -- 4.7 f 11.0 22.0 41.5 37.5 4 2.0 e3 r60iw 4470 -- 3 -- 6.8 f 11.0 22.0 41.5 37.5 4 2.0 e3 r60iw 4680 -- 4 -- 10.0 f 11.0 22.0 41.5 37.5 4 2.0 e3 r60iw 5100 -- 4 -- 15.0 f 13.0 24.0 41.5 37.5 4 2.0 e3 r60iw 5150 -- 4 -- 22.0 f 16.0 28.5 41.5 37.5 4 2.0 e3 r60iw 5220 -- 4 -- 33.0 f 19.0 32.0 41.5 37.5 4 2.0 e3 r60iw 5330 -- 4 -- 47.0 f 20.0 40.0 41.5 37.5 4 2.0 e3 r60iw 5470 -- 0 -- 68.0 f 24.0 44.0 41.5 37.5 4 2.0 e3 r60iw 5680 -- 0 -- mechanical version and packaging (table1) internal use tolerance: j (5%); k (10%); m (20%) mechanical version and packaging (table1) internal use tolerance: j (5%); k (10%); m (20%) all dimensions are in mm.
01/2005 50 rated cap. 1000vdc/250vac* std dimensions max dv/dt max k 0 part number b h l p (v/s) (v 2 /s) 1000 pf 4.0 9.0 13.0 10.0 60 120 e3 r60qf 1100 -- 0 -- 1500 pf 4.0 9.0 13.0 10.0 60 120 e3 r60qf 1150 -- 0 -- 2200 pf 4.0 9.0 13.0 10.0 60 120 e3 r60qf 1220 -- 0 -- 3300 pf 4.0 9.0 13.0 10.0 60 120 e3 r60qf 1330 -- 0 -- 4700 pf 5.0 11.0 13.0 10.0 60 120 e3 r60qf 1470 -- 0 -- 6800 pf 6.0 12.0 13.0 10.0 60 120 e3 r60qf 1680 -- 0 -- 0.010 f 5.0 11.0 18.0 15.0 30 60 e3 r60qi 2100 -- 0 -- 0.015 f 5.0 11.0 18.0 15.0 30 60 e3 r60qi 2150 -- 3 -- 0.022 f 6.0 12.0 18.0 15.0 30 60 e3 r60qi 2220 -- 3 -- 0.033 f 7.5 13.5 18.0 15.0 30 60 e3 r60qi 2330 -- 3 -- 0.033 f 9.0 12.5 18.0 15.0 30 60 e3 r60qi 2330 -- l -- 0.047 f 10.0 16.0 18.0 15.0 30 60 e3 r60qi 2470 -- 0 -- 0.047 f 13.0 12.0 18.0 15.0 30 60 e3 r60qi 2470 -- l -- 0.068 f 11.0 19.0 18.0 15.0 30 60 e3 r60qi 2680 -- 0 -- 0.033 f 6.0 15.0 26.5 22.5 15 30 e3 r60qn2330 -- 0 -- 0.047 f 6.0 15.0 26.5 22.5 15 30 e3 r60qn2470 -- 0 -- 0.068 f 7.0 16.0 26.5 22.5 15 30 e3 r60qn2680 -- 3 -- 0.10 f 8.5 17.0 26.5 22.5 15 30 e3 r60qn3100 -- 3 -- 0.15 f 13.0 22.0 26.5 22.5 15 30 e3 r60qn3150 -- 0 -- 0.15 f 9.0 17.0 32.0 27.5 12 24 e3 r60qr3150 -- 3 -- 0.22 f 9.0 17.0 32.0 27.5 12 24 e3 r60qr3220 -- 4 -- 0.33 f 11.0 20.0 32.0 27.5 12 24 e3 r60qr3330 -- 4 -- 0.47 f 13.0 22.0 32.0 27.5 12 24 e3 r60qr3470 -- 4 -- 0.68 f 14.0 28.0 32.0 27.5 12 24 e3 r60qr3680 -- 4 -- 1.00 f 18.0 33.0 32.0 27.5 12 24 e3 r60qr4100 -- 4 -- 1.50 f 22.0 37.0 32.0 27.5 12 24 e3 r60qr4150 -- 4 -- 0.47 f 11.0 22.0 41.5 37.5 10 20 e3 r60qw3470 -- 3 -- 0.68 f 11.0 22.0 41.5 37.5 10 20 e3 r60qw3680 -- 4 -- 1.00 f 13.0 24.0 41.5 37.5 10 20 e3 r60qw4100 -- 4 -- 1.50 f 16.0 28.5 41.5 37.5 10 20 e3 r60qw4150 -- 4 -- 2.20 f 19.0 32.0 41.5 37.5 10 20 e3 r60qw4220 -- 3 -- 3.30 f 24.0 44.0 41.5 37.5 10 20 e3 r60qw4330 -- 0 -- 4.70 f 30.0 45.0 41.5 37.5 10 20 e3 r60qw4470 -- 4 -- rated cap. 400vdc/200vac std dimensions max dv/dt max k 0 part number b h l p (v/s) (v 2 /s) 0.047 f 5.0 11.0 18.0 15.0 20.0 16.0 e3 r60mi 2470 -- 3 -- 0.068 f 5.0 11.0 18.0 15.0 20.0 16.0 e3 r60mi 2680 -- 3 -- 0.10 f 5.0 11.0 18.0 15.0 20.0 16.0 e3 r60mi 3100 -- 3 -- 0.15 f 5.0 11.0 18.0 15.0 20.0 16.0 e3 r60mi 3150 -- 3 -- 0.22 f 6.0 12.0 18.0 15.0 20.0 16.0 e3 r60mi 3220 -- 3 -- 0.33 f 7.5 13.5 18.0 15.0 20.0 16.0 e3 r60mi 3330 -- 3 -- 0.33 f 9.0 12.5 18.0 15.0 20.0 16.0 e3 r60mi 3330 -- l -- 0.47 f 8.5 14.5 18.0 15.0 20.0 16.0 e3 r60mi 3470 -- 3 -- 0.47 f 13.0 12.0 18.0 15.0 20.0 16.0 e3 r60mi 3470 -- l -- 0.68 f 11.0 19.0 18.0 15.0 20.0 16.0 e3 r60mi 3680 -- 3 -- 0.22 f 6.0 15.0 26.5 22.5 10.0 8.0 e3 r60mn3220 -- 3 -- 0.33 f 6.0 15.0 26.5 22.5 10.0 8.0 e3 r60mn3330 -- 3 -- 0.47 f 6.0 15.0 26.5 22.5 10.0 8.0 e3 r60mn3470 -- 3 -- 0.68 f 7.0 16.0 26.5 22.5 10.0 8.0 e3 r60mn3680 -- 3 -- 1.0 f 10.0 18.5 26.5 22.5 10.0 8.0 e3 r60mn4100 -- 3 -- 1.5 f 11.0 20.0 26.5 22.5 10.0 8.0 e3 r60mn4150 -- 3 -- 0.68 f 9.0 17.0 32.0 27.5 8.5 3.4 e3 r60mr3680 -- 3 -- 1.0 f 9.0 17.0 32.0 27.5 8.5 3.4 e3 r60mr4100 -- 3 -- 1.5 f 9.0 17.0 32.0 27.5 8.5 3.4 e3 r60mr4150 -- 4 -- 2.2 f 11.0 20.0 32.0 27.5 8.5 3.4 e3 r60mr4220 -- 4 -- 3.3 f 13.0 22.0 32.0 27.5 8.5 3.4 e3 r60mr4330 -- 4 -- 4.7 f 14.0 28.0 32.0 27.5 8.5 3.4 e3 r60mr4470 -- 4 -- 6.8 f 18.0 33.0 32.0 27.5 8.5 3.4 e3 r60mr4680 -- 4 -- 10.0 f 22.0 37.0 3 2.0 27.5 8.5 3.4 e3 r60mr5100 -- 4 -- 3.3 f 11.0 22.0 41.5 37.5 6.0 2.4 e3 r60mw4330 -- 3 -- 4.7 f 11.0 22.0 41.5 37.5 6.0 2.4 e3 r60mw4470 -- 4 -- 6.8 f 13.0 24.0 41.5 37.5 6.0 2.4 e3 r60mw4680 -- 4 -- 10.0 f 16.0 28.5 41.5 37.5 6.0 2.4 e3 r60mw5100 -- 4 -- 15.0 f 24.0 44.0 41.5 37.5 6.0 2.4 e3 r60mw5150 -- 3 -- 22.0 f 24.0 44.0 41.5 37.5 6.0 2.4 e3 r60mw5220 -- 4 -- 33.0 f 30.0 45.0 41.5 37.5 6.0 2.4 e3 r60mw5330 -- 4 -- rated cap. 630vdc/220*vac std dimensions max dv/dt max k 0 part number b h l p (v/s) (v 2 /s) 4700 pf 4.0 9.0 13.0 10.0 40 50 e3 r60pf 1470 -- 3 -- 6800 pf 4.0 9.0 13.0 10.0 40 50 e3 r60pf 1680 -- 3 -- 0.033 f 5.0 11.0 18.0 15.0 25 31 e3 r60pi 2330 -- 3 -- 0.047 f 5.0 11.0 18.0 15.0 25 31 e3 r60pi 2470 -- 3 -- 0.068 f 6.0 12.0 18.0 15.0 25 31 e3 r60pi 2680 -- 3 -- 0.10 f 7.5 13.5 18.0 15.0 25 31 e3 r60pi 3100 -- 3 -- 0.15 f 8.5 14.5 18.0 15.0 25 31 e3 r60pi 3150 -- 3 -- 0.10 f 6.0 15.0 26.5 22.5 12 15 e3 r60pn 3100 -- 3 -- 0.15 f 6.0 15.0 26.5 22.5 12 15 e3 r60pn 3150 -- 3 -- 0.22 f 7.0 16.0 26.5 22.5 12 15 e3 r60pn 3220 -- 3 -- 0.33 f 10.0 18.5 26.5 22.5 12 15 e3 r60pn 3330 -- 3 -- 0.33 f 9.0 17.0 32.0 27.5 10 12 e3 r60pr 3330 -- 3 -- 0.47 f 9.0 17.0 32.0 27.5 10 12 e3 r60pr 3470 -- 4 -- 0.68 f 11.0 20.0 32.0 27.5 10 12 e3 r60pr 3680 -- 4 -- 1.0 f 11.0 20.0 32.0 27.5 10 12 e3 r60pr 4100 -- 5 -- 1.5 f 18.0 33.0 32.0 27.5 10 12 e3 r60pr 4150 -- 3 -- 2.2 f 18.0 33.0 32.0 27.5 10 12 e3 r60pr 4220 -- 4 -- 3.3 f 22.0 3 7.0 32.0 27.5 10 12 e3 r60pr 4330 -- 4 -- 4.7 f 22.0 37.0 32.0 27.5 10 12 e3 r60pr 4470 -- 4 -- 1.0 f 11.0 22.0 41.5 37.5 8 9.6 e3 r60pw4100 -- 3 -- 1.5 f 11.0 22.0 41.5 37.5 8 9.6 e3 r60pw4150 -- 4 -- 2.2 f 13.0 24.0 41.5 37.5 8 9.6 e3 r60pw4220 -- 4 -- 3.3 f 16.0 28.5 41.5 37.5 8 9.6 e3 r60pw4330 -- 4 -- 4.7 f 19.0 32.0 41.5 37.5 8 9.6 e3 r60pw4470 -- 4 -- 6.8 f 20.0 40.0 41.5 37.5 8 9.6 e3 r60pw4680 -- 0 -- 10.0 f 24.0 44.0 41.5 37.5 8 9.6 e3 r60pw5100 -- 4 -- r60 mkt series metallized polyester film capacitor d.c. multipurpose applications product code: r60 wound version mechanical version and packaging (table1) internal use tolerance: j (5%); k (10%); m (20%) mechanical version and packaging (table1) internal use tolerance: j (5%); k (10%); m (20%) all dimensions are in mm. note 1: if the working voltage (v) is lower than the rated voltage (v r ), the capacitor may work at higher dv/dt. in this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio v r /v. the pulse characteristic k 0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. note 2: rated voltages higher than 1000vdc are available upon request. * not suitable for across-the-line applications. please refer to interference suppression capacitors (page 167).
01/2005 51 r60 mkt series metallized polyester film capacitor d.c. multipurpose applications product code: r60 test method and performance damp heat, steady state: test conditions temperature: +40c 2c relative humidity (rh): 93% 2% test duration: 56 days performance capacitance change | ? c/c|: 5% df change ( ? tg ): 50x10 -4 at 1khz insulation resistance: 50% of initial limit. endurance: test conditions temperature: +105c 2c test duration: 2000 h voltage applied: 1.25xv c performance capacitance change | ? c/c|: 5% df change ( ? tg ): 50x10 -4 at 10khz for c 1 f 30x10 -4 at 0 1khz for c > 1 f insulation resistance: 50% of initial limit. resistance to soldering heat: test conditions solder bath temperature: +260c 5c dipping time (with heat screen):10 s 1 s performance capacitance change | ? c/c|: 2% df change ( ? tg ): 50x10 -4 at 10khz for c 1 f 30x10 -4 at 0 1khz for c > 1 f insulation resistance: initial limit. long term stability (after two years) : storage : standard environmental conditions (see page 12). performance capacitance change | ? c/c|: 3% for c 0.1 f 2% for c > 0.1 f reliability : reference mil hdb 217 application conditions: temperature: +40c 2c voltage: 0.5xv r failure rate: 5 fit (1 fit = 1x10 -9 failures/componentsxh) failure criteria: short or open circuit capacitance change | ? c/c|: >10% df change ( ? tg ): >2xinitial limit. insulation resistance: <0.005xinitial limit. electrical characteristics rated voltage (v r ): 0 63 vdc -100 vdc - 160 vdc - 250 vdc 400 vdc - 630 vdc-1000 vdc . rated temperature (t r ): +85c temperature derated voltage: for temperatures between +85c and the upper operating temperature ( +105c for wound technology and +125c for stacked technology) a decreasing factor of 1.25% per degree c on the rated voltage v r (d.c. and a.c.) has to be applied. capacitance range: 1000pf to 220 f capacitance values: e6 series (iec 60063 norm). capacitance tolerances (measured at 1 khz) : 5% (j); 10% (k); 20% (m). total self-inductance (l) : (lead length ~2mm) pitch (mm) 10 15 22.5 27.5 37.5 l(nh) 9 10 18 18 22 dissipation factor (df): tg 10 -4 at +25c 5c khz c 1 f c > 1 f 1 10 100 1 50 100 insulation resistance: test conditions temperature: +25c 5c voltage charge time: 1 min voltage charge: 50 vdc for v r < 100 vdc 100 vdc for v r 100 vdc performance for v r 100 vdc 3750 m ? for c 0.33 f (50000 m ? ) * 1250 s for c > 0.33 f ( 5000 s) * f or v r >100 vdc 30000 m ? for c 0.33 f (50000 m ? ) * 10000 s for c > 0.33 f (17000 s) * * typical value test voltage between terminations: 1.6xv r applied for 2 s at +25c 5c
01/2005 52 r60 mkt series metallized polyester film capacitor d.c. multipurpose applications product code: r60 max. voltage (vr.m.s.) versus frequency (sinusoidal wave-form / th 40c) note: p (pitch) in mm.
01/2005 53 r60 mkt series metallized polyester film capacitor d.c. multipurpose applications product code: r60 max. current (ir.m.s.) versus frequency (sinusoidal wave-form / th 40c) note: p (pitch) in mm.
|
