MIG200J201H 2003-08-07 1 toshiba intelligent power module silicon n channel igbt MIG200J201H high power switching applications motor control applications integrates inverter, brake power circuits & control circuits (igbt drive units, protection units for over ? current, under ? voltage & over ? temperature) in one package. the electrodes are isolated from case. high speed type igbt : v ce (sat) = 2.5v (max) t off = 2.0s (max) t rr = 0.15s (max) package dimensions : toshiba 2 ? 136a1a weight : equivalent circuit
MIG200J201H 2003-08-07 2 maximum ratings (t j = 25c) stage characteristic conditi on symbol ratings unit supply voltage p ? n power terminal v cc 450 v collector ? emitter voltage D v ces 600 v collector current tc = 25c, dc i c 200 a forward current tc = 25c, dc i f 200 a collector power dissipation tc = 25c p c 800 w inverter junction temperature D t j 150 c supply voltage p ? n power terminal v cc 450 v collector ? emitter voltage D v ces 600 v collector current tc = 25c, dc i c 100 a reverse voltage D v r 600 v forward current tc = 25c, dc i f 100 a collector power dissipation tc = 25c p c 400 w brake junction temperature D t j 150 c control supply voltage vd ? gnd terminal v d 20 v input voltage in ? gnd terminal v in 20 v fault output voltage fo ? gnd (l) terminal v fo 20 v control fault output current fo sink current i fo 14 ma operating temperature D t c ? 20~+100 c storage temperature range D t stg ? 40~+125 c isolation voltage ac 1 minute v iso 2500 v module screw torque m5 D 3 nm electrical characteristics (t j = 25c) a. inverter stage characteristic symbol test condition min typ. max unit t j = 25c D D 1 collector cut ? off current i cex v ce = 600v t j = 125c D D 10 ma t j = 25c D 2.0 2.5 collector ? emitter saturation voltage v ce (sat) v d = 15v, i c = 200a v in = 3v 0v t j = 125c D 2.0 D v forward voltage v f i f = 200a D 2.1 2.7 v t on 0.8 1.5 2.2 t c (on) D 0.5 1.0 t rr D 0.08 0.15 t off D 1.2 2.0 switching time t c (off) v cc = 300v, i c = 200a v d = 15v, v in = 3v ? 0v inductive load (note 1) D 0.3 0.6 s
MIG200J201H 2003-08-07 3 b. brake stage characteristic symbol test condition min typ. max unit t j = 25c D D 1 cellector cut ? off current i cex v ce = 600v t j = 125c D D 10 ma t j = 25c D 2.0 2.5 collector ? emitter saturation voltage v ce (sat) v d = 15v, i c = 100a v in = 3v 0v t j = 125c D 2.0 D v t j = 25c D D 1 reverse current i r v r = 600v t j = 125c D D 10 ma forward voltage v f i f = 100a ? 2.1 3.0 v t on 0.8 1.5 2.2 t c (on) D 0.5 1.0 t rr D 0.30 0.50 t off D 1.2 2.0 switching time t c (off) v cc = 300v, i c = 100a v d = 15v, v in = 3v ? 0v inductive load (note 1) D 0.3 0.6 s c. control stage (t j = 25c) characteristic symbol test condition min typ. max unit high side i d (h) D 20 30 control circuit current low side i d (l) v d = 15v D 80 120 ma input on signal voltage v in (on) v d = 15v, i c = 200ma 0.9 1.1 1.3 v protection i fo (on) 8 10 12 fault output current normal i fo (off) v d = 15v D D 1 ma inverter 320 400 D over current protection trip level brake oc v d = 15v, tj = 125c 210 300 D a inverter 480 600 D short circuit protection trip level brake sc v d = 15v, t j = 125c 315 450 D a over current cut ? off time t off (oc) v d = 15v D 10 D s trip level ot 111 118 125 over temperature protection reset leevel otr case temperature 93 100 107 c trip level uv 11.3 12.0 12.7 control supply under voltage protection reset leevel uvr D 11.8 12.5 13.2 v fault output pulse width t fo v d = 15v 1 2 3 ms
MIG200J201H 2003-08-07 4 d. thermal resistance (t j = 25c) characteristic symbol test condition min typ. max unit inverter igbt D D 0.156 inverter frd D D 0.416 brake igbt D D 0.312 junction to case thermal resistance rth (j-c) brake frd D D 1.00 c / w case to fin thermal resistance rth (c-f) compound is applied D 0.04 D c / w note 1: switching time te st circuit & timing char
MIG200J201H 2003-08-07 5 1 1 1 1 1 1
MIG200J201H 2003-08-07 6 1
MIG200J201H 2003-08-07 7 package dimensions: toshiba 2-136a1a unit: mm 1
MIG200J201H 2003-08-07 8 ? the information contained herein is subject to change without notice. ? the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba for any infringements of patents or other rights of the third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of toshiba or others. ? toshiba is continually working to improve the quality and reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inhe rent electrical sensitivity and vulnerability to physical stress. it is the responsibility of t he buyer, when utilizing toshiba products , to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within s pecified operating ranges as set forth in the most recent toshi ba products specifications. also, pl ease keep in mind the precautions and conditions set forth in the ?handling guide for semicond uctor devices,? or ?toshiba semiconductor reliability handbook? etc.. ? the toshiba products listed in this document are inte nded for usage in general electronics applications (computer, personal equipment, office equipment, measuri ng equipment, industrial robotics, domestic appliances, etc.). these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunc tion or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage include atomic energy control in struments, airplane or spaceship instruments, transportation instruments, traffic signa l instruments, combusti on control instruments, medical instruments, all types of safety devices, et c.. unintended usage of toshiba products listed in this document shall be made at th e customer?s own risk. ? toshiba products should not be embedded to the down stream products which are prohibited to be produced and sold, under any law and regulations. 030619ea a restrictions on product use
|
