?2009. renesas technology corp., all rights reserved. 1/2 renesas technology corp. url http://www.renesas.com/en/diode rever se voltag e rectifier curr ent v rrm (v) io (a) vf (v) if (a) ir (ma) vr (v) hrc0103c 30 0.1 0.60 0.1 0.1 5 low ir hrc0203b 30 0.2 0.52 0.2 10.0 30 low ir rkr0303akj 30 0.3 0.42 0.3 200 30 low vf rkr0303bkj 30 0.3 0.50 0.3 50 30 low ir hru0203a 30 0.2 0.50 0.2 50 30 low ir hru0302a 20 0.3 0.40 0.3 100 20 low vf hrv103a 30 1.0 0.36 0.7 1000 30 low vf hrv103b 30 1.0 0.45 0.7 100 30 low ir rkr104b 40 1.0 0.55 0.7 50 40 low ir rkr0703bkh 30 0.7 0.55 0.7 50 30 low ir rkr0505akh 50 0.5 0.46 0.5 400 30 low vf rkr0505bkh 50 0.5 0.60 0.5 40 30 low ir rkr0503akh 30 0.5 0.37 0.5 500 30 low vf rkr0503bkh 30 0.5 0.44 0.5 100 30 low ir hrw0302a 20 0.3 0.40 0.3 100 20 low vf hrw0502a 20 0.5 0.40 0.5 200 20 low vf urp turp mpak remarks forward voltage leakage current package part no. ufp power supply control ic schottky diodes for protecting led drivers schottky diodes for circuit protection july 2009 small & high radiation package achieves smaller and lower profile set. low vf/low ir characteristics achieve more power saving and higher performance!! schottky diodes for circuit protection of mobile equipment?s batteries recommended product lineup dc-in li-ion battery hpa power supply line (vcc) power management sw tx rfic backlight of white led structure led driver ic (sw reg. system) rgb led characteristics of schottky diodes for circuit protection qty. of led drive a nd its current rating 1~4 pcs: io=500ma is required ~8 pcs: io=1a is required on time: loss due to voltage drop. ? low vf is required off time: loss due to applying reverse voltage. ? low leakage current is required li-ion battery dc-in battery charging circuit backflow prevention backflow prevention battery select sw schottky diode rej01g0009-0400 new new new new
?2009. renesas technology corp., all rights reserved. 2/2 renesas technology corp. url http://www.renesas.com/en/diode v rrm io (v) (a) (max) if (a) (max) vr (v) hrw0202a 20 0.2 0.40 0.1 0.05 20 cc hrw0202b 20 0.2 0.42 0.1 0.01 20 cc hrw0203a 30 0.2 0.50 0.2 0.05 30 si(1) hrw0203b 30 0.2 0.50 0.2 0.05 30 si(2) hrw0302a 20 0.3 0.40 0.3 0.10 20 si(1) hrw0502a 20 0.5 0.40 0.5 0.20 20 si(1) hrw0503a 30 0.5 0.55 0.5 0.05 30 si(1) hrw0702a 20 0.7* 0.43 0.7 0.20 20 si(1) hrw0703a 30 0.7* 0.50 0.7 0.10 30 si(1) hrb0103a 30 0.1 0.44 0.1 0.05 30 si(1) hrb0103b 30 0.1 0.44 0.1 0.05 30 se hrb0502a 20 0.5* 0.40 0.5 0.20 20 si(1) *: if rate v rrm io (v) (a) (max) if (a) (max) vr (v) hrv103a 30 1 0.36 0.7 1.00 30 hrv103b 30 1 0.45 0.7 0.10 30 rkr104b 40 1 0.55 0.7 0.05 40 rkr0505akh 50 0.5 0.46 0.5 0.40 20 rkr0505bkh 50 0.5 0.60 0.5 0.04 30 rkr0703bkh 30 0.7 0.55 0.7 0.05 30 hru0103a 30 0.1 0.44 0.1 0.05 30 hru0203a 30 0.2 0.50 0.2 0.05 30 hru0302a 20 0.3 0.40 0.3 0.10 20 hrc0103a 30 0.1 0.44 0.1 0.05 30 hrc0103c 30 0.1 0.60 0.1 0.0001 5 hrc0203b 30 0.2 0.52 0.2 0.01 30 hrc0203c 30 0.2 0.45 0.2 0.03 10 hrd0103c 30 0.1 0.60 0.1 0.0001 5 hrd0203c 30 0.2 0.45 0.2 0.03 10 hrl0103c 30 0.1 0.60 0.1 0.0001 5 rkd700kl 30 0.05 0.43 0.01 0.001 30 mp6 rkd702kp 30 0.05* 0.35 0.001 0.00025 30 *: if rate efp package part no. ufp sfp urp turp cmpak vf (v) ir (ma) package part no. maximum ratings characteristics mpak maximum ratings characteristics vf (v) pin connection ir (ma) pin connection cc type si(1) type si(2) type se type product lineup of schottky d iodes for circuit protection schottky diodes for circuit protection 3-terminal type rectification use 2-terminal type rectification use
|
