patent numbers 5713755 / 5961339 2 max sway (either direction) do not scale from this print ftr-1xx-xx-xx-d-x-xx no of positions -02 thru -50 (per row) body specification -d: double (use htms-50-d) lead style see table 1 plating specification -g: 10" gold in contact area, 3" gold on tail -t: matte tin contact and tail (lead styles -01, -02, -03, -51, -52 only) -s: 30" selective gold in contact area, matte tin on tail -f: 3" flash selective gold in contact area, matte tin on tail (lead style -01 only) -sm: 30" selective gold in contact area, matte tin on tail -tm: matte tin contact and tail (lead styles -01, -02, -03, -51, -52 only) -fm: 3" flash selective gold in contact area, matte tin on tail -h: 30" heavy gold in contact area, 3" gold on tail -l: 10" light selective gold in contact area, matte tin on tail option -p: pick & place pad (use ppp-22) (see fig 3, sht 2) [5 pos min] option -xx: polarizing specification xx indicates pos to be ommited -a: alignment pin (5 pos min) ( see fig 2, sht 2) samtec discretion on which -a pin used. -lc: staked locking clip (use lc-05-tm) (see fig 4, sht 2 & note 10) -tr: tape and reel packaging [+.05/-.25] (no of pos x .050 [1.27]) +.002/-.010 .196 4.98 ref .050 ref 1.27 .100 2.54 ref 3 max sway (either direction) 02 100 01 99 htms-50-d see note 4 .100 2.54 ref .018 sq 0.46 ref area contact t-1m6-xx-xx-2 fig 1 ftr-1xx-xx-d shown "b" .050 (typ) 1.27 (see note 5) 90 - 2 + 4 (typ) .05 1.3 (see note 7) .2960 ref 7.518 2 max sway (either direction) c1 c3 c2 .004 [.10] c ar ar ar ar ar sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .x: .1 [2.5] .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: hi-temp terminal micro-strip (double row) by: ftr-1xx-xx-xx-d-x-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing 02/09/1995 2 1 sheet scale: 2:1 insulator: lcp, ul 94 vo, color: black terminal: phos bronze c:\enterprisevault\dwg\misc\mktg\ftr-1xx-xx-xx-d-x-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. maximum cut flash: .010[.25]. 3. minimum pushout force: 2 lb. 4. maximum pin rotation in body: 2. 5. shear tails to dimension shown. 6. maximum burr allowance: .003[.08] 7. measured at bend radius. 8. tube positions -05 and greater; layer package positions -02 thru -04. 9. -p option: tube positions -07 thru -50; all others, tape & reel only. 10. due to high amount of insertion force needed, the -lc option is not compatible with auto placement. samtec recomends manual placement for all assemblies with the -lc option. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 bratcher revision ar
.0430 ref 1.092 .090 2.29 .040 1.02 ref sma-8h .105 2.67 .056 ref 1.42 lc-05-tm fig 4 -lc option: staked locking clip (6 positions minimum) (different as shown, otherwise see fig 1) .090 2.29 ref .0430 1.092 ref .040 1.02 ref htms-50-d-xx .375 ref 9.53 "q" "n" .230 5.84 ref c l .390 ref 9.91 ppp-22 (no of pos -2) x .0500[1.270] ref (no of pos - 2) x .0500[1.270] (no. of pos - 2) x .0500[1.270] fig 2 -a option: alignment pin (different as shown, otherwise see fig 1) fig 3 -p pick & place (5 positions minimum, see note 9) "n" = use measured dim "q" = {("n" - .375) / 2} .020 ar ar staked (5 positions minimum) molded (5 positions minimum) ar sheet of hi-temp terminal micro-strip (double row) by: ftr-1xx-xx-xx-d-x-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing bratcher 02/09/1995 2 2 sheet scale: 2:1 revision ar c:\enterprisevault\dwg\misc\mktg\ftr-1xx-xx-xx-d-x-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
