specifcations subject to change without notice. all dimensions in inches. ? copyright 2010 the connor-winfeld corporation 2111 comprehensive drive aurora, illinois 60505 phone: 630- 851- 4722 fax: 630- 851- 5040 www.conwin.com 2111 comprehensive drive aurora, illinois 60505 phone: 630- 851- 4722 fax: 630- 851- 5040 www.conwin.com high frequency 5.0v hcmos vcxo hv6x-xxxg - series description: the connor-winfeld hv6x-xxxg series are 14 pin dip, 5.0v hcmos, voltage controlled crystal oscillator (vcxo). based on a fundamental crystal design the hv6x-xxxg series are designed for phase lock loop applications requiring low jitter and tight frequency stability. operating specifcations parameter minimum nominal maximum units notes center frequency (fo) 30 - 100 mhz operating temp range (ta) -40 - 85 c supply voltage (vcc) 4.75 5.0 5.25 vdc supply current (icc) <50 mhz - - 35 ma >50 mhz - - 60 ma jitter: integrated phase jitter - - 1.0 ps rms 3 period jitter (jp) - - 5.0 ps rms ssb phase noise @ 10 hz offset - -60 - dbc/hz @ 100 hz offset - -90 - dbc/hz @ 1 khz offset - -120 - dbc/hz @ 10 khz offset - -140 - dbc/hz @ 100 khz offset - -145 - dbc/hz start-up time - - 10 ms absolute maximum ratings parameter minimum nominal maximum units notes storage temperature (tst) -55 - 125 c supply voltage (vcc) -0.5 - 7.0 vdc control voltage (vc) -0.5 - vcc + 0.5 vdc features: 5.0 vdc operation available frequency stabilities: 20ppm, 25ppm, 50ppm or 100ppm temperature range: -40 to 85c available pull ranges: 50ppm to 150 ppm hcmos output 14 pin dip package rohs compliant / lead free bulletin vx629 page 1 of 2 revision 00 date 06 dec 2010 us headquarters: 630-851-4722 european headquarters: +353-61-472221 input characteristics parameter minimum nominal maximum units notes control voltage range (vc) 0.5 2.5 4.5 vdc center frequency 2.0 2.5 3.0 vdc transfer characteristic positive linearity -10 - 10 % input impedance - 50k - ohm modulation bandwidth (3db) 15 - - khz hcmos output characteristics parameter minimum nominal maximum units notes load - 15 - pf output voltage high (voh) 4.5 - - vdc low (vol) - - 0.5 vdc duty cycle 40 50 60 % optional duty cycle 45 50 55 % add suffx "s" rise / fall times - - 3 ns cw 1049 hv64-120 38.88 mhz model specifcations model number frequency stability (see ordering information on page 2.) hv61-xxxxg -25 - 25 ppm 1 hv62-xxxxg -50 - 50 ppm 1 hv63-xxxxg -100 - 100 ppm 1 hv64-xxxxg -20 - 20 ppm 1 frequency pullability codes minimum nominal maximum units notes 100 50 - - ppm 2 120 60 - - ppm 2 150 75 - - ppm 2 200 (not available above 70 mhz) 100 - - ppm 2 300 (not available above 50 mhz) 150 - - ppm 2
specifcations subject to change without notice. all dimensions in inches. ? copyright 2010 the connor-winfeld corporation 2111 comprehensive drive aurora, illinois 60505 phone: 630- 851- 4722 fax: 630- 851- 5040 www.conwin.com bulletin vx629 page 2 of 2 revision 00 date 06 dec 2010 ordering information test circuit environmental characteristics vibration: vibration per mil std 883e method 2007.3 test condition a. shock: mechanical shock per mil std 883e method 2002.4 test condition b. soldering process; rohs compliant lead free. see soldering profle on page 2. solderability; solderability per mil std 883e method 2003. 1 . control voltage (vc) 7. ground 8. output 14. supply voltage (vcc) pin connections solder profle 120c 150c 180c 260c 0 220c 360 sec. max. 120 s max. 10 s 60 s max. ti me te mperature 260c package layout 5.0v control v oltage 15pf .310 7.87mm dimensional t olerance: .005 (.127mm) .02 (.508mm) marking diagram cw 1049 hv64-120 38.88 mhz output waveform 90% 50% 10% notes: 1. frequency stability vs. temperature, referenced to the frequency measured at 25c with the control voltage at 2.5 vdc. 2. pull range is measured at 25c, referenced to fo. 3. bw= 12 khz to 20 mhz. package characteristics package hermetically sealed 14 pin dip package . vcxo 5.0 vdc hcmos 14 pin dip package temperature range 6= -40 to 85c freq. stability 1 = 25 ppm 2 = 50 ppm 3 = 100 ppm 4 = 20 ppm output frequency - frequency format -xxx.xm min. * -xxx.xxxxxxm max.* * amount of numbers after the decimal point. m = mhz hv 6 4 038.88m example part number: hv64-120g-038.88m = vcxo 14 pin dip 5.0 vdc, -40 to 85c, freq. stability 20 ppm, freq pullability 60 ppm, rohs compliant, duty cycle 40/60%, output frequency 38.88 mhz. pullability -100 = 50 ppm -120 = 60 ppm -150 = 75 ppm -200 = 100 ppm -300 = 150 ppm -120 rohs compliant lead free g duty cycle blank = 40/60% s = 45/55%
|
