6-48 call toll free: 1 (800) 323-9612 .085 in. (2.16mm) density miniature ribbon f eatures low-pass (single-pole, capacitive) filtered contacts reduce inbound and outbound conducted emi standard capacitance values of 50pf through 1,200pf. saves space by incorporating required filter functions directly into footprint of i/o connector. available as straight solder tail plug for solder termination to printed circuit board (nominal thickness through .093") and as plug/socket adapter, in 50-position size. all-plastic design reduces cost. all plugs lock with instalatch passive latch feature for automatic latching. adapters available with instalatches, with bail latches, or with no latches on socket side. available with through holes, #4-40 holes, #6-32 holes, or m3 holes for mounting/latching. filtered vertical-mount solder tail and male/female adapter m aterials insulator: gray ul94v-0 rated glass-filled polyester contact: copper alloy contact plating: 30in. select gold over 50in. select nickel standard; tin-lead on solder tails mounting hardware plating: tin-lead e nvironmental operating temperature: -50c to +105c shock: 50g peak, per eia std. rs364, tp27, condition a vibration: 3 cycles @ 10-55hz in each of 3 axes per eia std. 364, tp28, condition a moisture resistance: per eia std. rs364, tp31, condition b, with step 7b excluded e lectrical voltage rating: 500vdc @ sea level contact rating: 3 amps rf current rating: 0.3 amps leakage current: 10ma maximum per contact when subjected to 1000 vac test voltage, applied over 30 seconds and held for 60 seconds per fcc part 68.5 voltage surge: withstands 1,500v peak longitudinal voltage surge with 10sec. risetime, 160sec. decay contact resistance: 6 milliohms maximum, per eia std. rs364, tp6 insulation resistance: 5000 megohms minimum dissipation factor: 5% maximum @ 25c, 1khz and 1 vac rms maximum insertion loss: capacitance insertion loss, min. (db, @ 25c, @ 50 ohm, no load, per mil-std-220) @ 25c, 1khz, 1 vac rms max. 10mhz 30mhz 50mhz 70mhz 100mhz 500mhz 1ghz 50pf+ 15% - - - - 2 14 11 100pf+ 15% - - - - 3 14 11 220pf+ 15% - - 4 7 12 14 11 470pf+ 15% - 5 11 14 20 14 11 820pf+ 15% 3 3 16 20 20 14 11 1,000pf+ 15% 3 3 16 20 20 14 11 1,200pf+ 15% 3 3 16 20 20 14 11 m echanical durability: 200 mating/unmating cycles mating / unmating forces: mating force (max.) unmating force (min.) with instalatches without instalatches size lb. kg lb. kg 50 32 14.52 7 3.18
ordering information, filtered vertical-mount solder tail plug, 50 position capacitance .144 hole #4-40 hole #6-32 hole m3 -0.5 hole 50pf15% cf97-50pb-th cf97-50pb-4t cf97-50pb-6t cf97-50pb-3t 100pf15% cf97-50pc-th cf97-50pc-4t cf97-50pc-6t cf97-50pc-3t 220pf15% cf97-50pd-th cf97-50pd-4t cf97-50pd-6t cf97-50pd-3t 470pf15% cf97-50pe-th cf97-50pe-4t cf97-50pe-6t cf97-50pe-3t 820pf15% cf97-50pf-th cf97-50pf-4t cf97-50pf-6t cf97-50pf-3t 1,000pf15% cf97-50ph-th cf97-50ph-4t cf97-50ph-6t cf97-50ph-3t 1,200pf15% cf97-50pj-th cf97-50pj-4t cf97-50pj-6t cf97-50pj-3t 50pf15% - cf97-50pb-4b cf97-50pb-6b cf97-50pb-3b 100pf15% - cf97-50pc-4b cf97-50pc-6b cf97-50pc-3b 220pf15% - cf97-50pd-4b cf97-50pd-6b cf97-50pd-3b 470pf15% - cf97-50pe-4b cf97-50pe-6b cf97-50pe-3b 820pf15% - cf97-50pf-4b cf97-50pf-6b cf97-50pf-3b 1,000pf15% - cf97-50ph-4b cf97-50ph-6b cf97-50ph-3b 1,200pf15% - cf97-50pj-4b cf97-50pj-6b cf97-50pj-3b 6-49 call toll free: 1 (800) 323-9612 .085 in. (2.16mm) density miniature ribbon filtered vertical-mount solder tail and male/female adapter filtered vertical-mount solder tail plug vertical-mount filtered miniature ribbon plugs provide filtered i/o directly from printed circuit boards, where the mating face of the connector is in a plane parallel to that of the board. filtering keeps conducted emi from passing between the system board and i/o cable. the connector?s filter must be grounded to the system at the mounting holes, via either top flange or through the lower standoff to a pad on the component side of the printed circuit board. see page 6-51 for accessories such as dust covers and mounting screws that make the use of cinch filtered miniature ribbon connectors even more cost-effective in board-mount applications. through or threader hole threaded boardlock
6-50 6 call toll free: 1 (800) 323-9612 .085 in. (2.16mm) density miniature ribbon filtered vertical-mount solder tail and male/female adapter ordering information, filtered adapter, 50 position capacitance #4-40 hole #6-32 hole m3 -0.5 hole none (connector saver) cf97-50aa-4t cf97-50aa-6t cf97-50aa-3t 50pf15% cf97-50ab-4t cf97-50ab-6t cf97-50ab-3t 100pf15% cf97-50ac-4t cf97-50ac-6t cf97-50ac-3t 220pf15% cf97-50ad-4t cf97-50ad-6t cf97-50ad-3t 470pf15% cf97-50ae-4t cf97-50ae-6t cf97-50ae-3t 820pf15% cf97-50af-4t cf97-50af-6t cf97-50af-3t 1,000pf15% cf97-50ah-4t cf97-50ah-6t cf97-50ah-3t 1,200pf15% cf97-50aj-4t cf97-50aj-6t cf97-50aj-3t none (connector saver) cf97-50aa-4ti cf97-50aa-6ti cf97-50aa-3ti 50pf15% cf97-50ab-4ti cf97-50ab-6ti cf97-50ab-3ti 100pf15% cf97-50ac-4ti cf97-50ac-6ti cf97-50ac-3ti 220pf15% cf97-50ad-4ti cf97-50ad-6ti cf97-50ad-3ti 470pf15% cf97-50ae-4ti cf97-50ae-6ti cf97-50ae-3ti 820pf15% cf97-50af-4ti cf97-50af-6ti cf97-50af-3ti 1,000pf15% cf97-50ah-4ti cf97-50ah-6ti cf97-50ah-3ti 1,200pf15% cf97-50aj-4ti cf97-50aj-6ti cf97-50aj-3ti none (connector saver) cf97-50aa-4tb cf97-50aa-6tb cf97-50aa-3tb 50pf15% cf97-50ab-4tb cf97-50ab-6tb cf97-50ab-3tb 100pf15% cf97-50ac-4tb cf97-50ac-6tb cf97-50ac-3tb 220pf15% cf97-50ad-4tb cf97-50ad-6tb cf97-50ad-3tb 470pf15% cf97-50ae-4tb cf97-50ae-6tb cf97-50ae-3tb 820pf15% cf97-50af-4tb cf97-50af-6tb cf97-50af-3tb 1,000pf15% cf97-50ah-4tb cf97-50ah-6tb CF97-50AH-3TB 1,200pf15% cf97-50aj-4tb cf97-50aj-6tb cf97-50aj-3tb filtered panel mount feedthrough adapter filtered ribbon panel mount adapters provide filtered i/o in systems where internal cabling carries signals to the system panel . by filtering right at the panel, emi that could otherwise be generated over the length of the internal cable is prevented. the us e of a plug/socket adapter also yields a benefit in serviceability. should it ever be necessary to replace the filter, an adapter can be readily replaced without replacing a bulky, more expensive cable assembly. the adapter must be grounded to the system panel through the mounting hardware, which extends to both plug and socket flanges; thus, the adapter may be mounted with either side to the panel. adapters are also available without filter capacitors. often referred to as ?connector savers?, these devices are most useful as ?throw away? intermediate interconnects in applications where numerous mating/unmating cycles are required. see page 6-51 for accessories such as bent bail latches, dust covers, and mounting screws that make the use of cinch miniature ribbon filtered adapters even more cost-effective in panel mount-applications. socket without latches socket with instalatches socket with bail latches
|
