hcmd?7??3?2? factsheet f-200 supplement samtec usa ?tel: 1-800-samtec-9 or 812-944-6733 ?fax: 812-948-5047 samtec uk ?tel: 01236 739292 ?fax: 01236 727113 samtec asia pacific ?tel: 65-745-5955 ?fax: 65-841-1502 samtec germany ?tel: +49 (0) 89 / 89460-0 ?fax: +49 (0) 89 / 89460-299 samtec france ?tel: 01 60 95 06 60 ?fax: 01 60 95 06 61 samtec italy ?tel: 39 039 6890337 ?fax: 39 039 6890315 samtec japan ?tel: 81-424-42-8318 ?fax: 81-424-42-8319 samtec china ?tel: 86-21-5385-4089 ?fax: 86-21-5385-4047 samtec taiwan ?tel: (02) 2395-1677 ?fax: (02) 2395-1689 due to technical progress, all designs, specifications and components are subject to change without notice. mates with: tsw, mtsw, tst, ew, bst, lcw, zst, mtlw, tsm male plug on one end with socket on other. begin part number with hcm. socket or male plug on each end = = socket or male plug on one end note: idc assemblies are non-standard, non-returnable. features: low profile skinny side locks dual beam contacts single & double row high temp insulator odd lead counts customs our specialty easy assembly end assembly .100" idc cable strips hcmd, hcms hcsd, hcss row option type strip no. pins per row = (3,30) .130 (0,51) .020 (2,54) .100 (0,64) .025 sq typ (5,08) .200 (2,54) .100 (3,05) .120 double (hcmd) single (hcms) no. of positions x .100 (2,54) + .180 (4,57) (7,87) .310 ref (3,30) .130 (2,54) .100 (5,08) .200 (2,54) .100 double (hcsd) single (hcss) (0,76) .030 sq. typ. no. of positions x .100 (2,54) + .180 (4,57) (9,53) .375 ref d = double (color coded cable n/a for 31 thru 36 pins/row. see g option.) = single s (call samtec other sizes) specifications: hcsd, hcss insulator material: black liquid crystal polymer flammability rating: ul 94v-o insulation resistance: 5000 m ? temperature range: -65 c to +80 c withstanding voltage: 1000 vrms @ 60 hz contact: phosphor bronze plating: 10 " (0,25 m) on contact area, 150 " (3,81 m) sn on balance over 50 " (1,27 m) ni. current rating: 1a contact resistance: 10 m ? max lead size range: .024" (0,61mm) sq to .026" (0,66mm) sq lead insertion depth: .185" (4,70mm) to .250" (6,35mm) insertion force: 6 oz avg (1,67n) average with .025" (0,64mm) sq probe withdrawal force: 3 oz avg (0,83n) average with .025" (0,64mm) sq probe wire: 28 awg 7/36 stranded tinned copper specifications: hcmd, hcms insulator material: black liquid crystal polymer flammability rating: ul 94v-o insulation resistance: 5000 m ? temperature range: -65 c to +80 c withstanding voltage: 1000 vrms @ 60 hz terminal: phosphor bronze plating: 150 " (3,81 m) sn over 50 " (1,27 m) ni current rating: 1a wire: 28 awg 7/36 stranded tinned copper 05, 07, 08, 10, 12, 13, 15, 17, 20, 25, 30, 32, 36 s d double end t transfer end hcs socket strip hcm = male strip = single end
factsheet f-200 supplement hcsd 12 s 03 01 t samtec usa tel: 1-800-samtec-9 or 812-944-6733 fax: 812-948-5047 samtec uk tel: 01236 739292 fax: 01236 727113 samtec asia pacific tel: 65-745-5955 fax: 65-841-1502 samtec germany tel: +49 (0) 89 / 89460-0 fax: +49 (0) 89 / 89460-299 samtec france tel: 01 60 95 06 60 fax: 01 60 95 06 61 samtec italy tel: 39 039 6890337 fax: 39 039 6890315 samtec japan tel: 81-424-42-8318 fax: 81-424-42-8319 samtec china tel: 86-21-5385-4089 fax: 86-21-5385-4047 samtec taiwan tel: (02) 2395-1677 fax: (02) 2395-1689 due to technical progress, all designs, specifications and components are subject to change without notice. 6 same as s xx except outer strip connected to conductor #2 and inside strip connected to conductor #1. assembled length breakout starts with number 1 lead indicated by brown wire or red stripe. shown on top side. 4 #1 wire opposite position #1 5 xx (127,00) 5.00 max. (50,80) 2.00 min. (50,80) 2.00 min. (101,60) 4.00 minimum 6 when mating double row connector with two single row connectors, the outer most single will be connected to conductor #1 and the inside single to conductor #2. outer most (end of assembly) xx 1 / 8 " (3,18) single row connectors (50,80) 2.00 min. (101,60) 4.00 minimum double row strips outer most (end of assembly) xx 1 / 8 " (3,18) 6 other options notch polarization 2 standard cable is color coded. specify g for gray cable with one red edge. 1 specify xx as position. for double the same position will be polarized on both ends. (not available on hcm, unless transfer, then only the socket is polarized) 01 03 02 04 01 03 single double 02 04 specify suffix from table. all dimensions are 1 / 16 " (1,59mm) . not available in 28 positions and higher. st8 st4 st2 st3 1 / 8 " (3,18) 1 / 4 " (6,35) 1 / 2 " (12,70) 3 / 8 " (9,53) 3 specify xx as number of conducts to be broken out. requires sxx, wxx or dxx 7 requires sxx, wxx or dxx 7 7 required for hcss and hcsd. (not available on hcms or hcmd, unless transfer, then only the socket is polarized.) plating option assembled length in inches (1/8") 2 inches minimum 01 150 " (3,81 m) tin (standard on hcms & hcmd. leave blank) t = 10 " (0,25 m) gold on contact area or tail, 150 " (3,81 m) tin on balance (standard on hcss & hcsd. leave blank) s = 02 (3,81) .150 (1,27) .050 01 n = notch polarization r = reversed w xx = wiring reversed daisy chain, single xx = assembled length rw = reversed wiring s xx = daisy chain single d xx = daisy chain, double p xx = position polarization g = gray cable st x = stripped & tinned b xx = breakout m = middle reversed o = outside reversed .100" idc cable strips hcmd, hcms hcsd, hcss
|
