- 1 - p/n: c-13-155(c)-t(3)-sscx(-g5) 155 mbps single mode transceive r ds-5372 rev 0.0 2009-04-30 features duplex sc single mode transceiver industry standard 1x9 footprint intermediate reach sonet oc-3 sdh stm-1 compliant single +5v/3.3v power supply pecl/lvpecl differential inputs and outputs ttl/lvttl signal detection output [c-13-155c-t(3)-ssc3(5/7/9)] pecl/lvpecl signal detection output [c-13-155-t(3)-ssc3(5/7/9)] wave solderable and aqueous washable led multisourced 1x9 transceiver interchangeable class 1 laser int. safety standard iec 825 compliant uncooled laser diode with mqw structure complies with telcordia (bellcore) gr-468-core atm 155 mbps links rohs compliance available table 1 ? absolute maximum rating parameter symbol min. typical max. unit notes power supply voltage vcc 0 - 6 v power supply voltage vcc 0 - 3.6 v output current i out - - 30 ma soldering temperature - - - 260 oc 1 storage temperature t stg -40 - 85 oc note 1: 10 senconds on leads only table 2 ? recommended operating condition parameter symbol min. typical max. unit notes power supply voltage vcc 4.75 5 5.25 v power supply voltage vcc 3.1 3.3 3.5 v operating temperature (case) t opr 0 - 70 oc 2 operating temperature (case) t opr -40 - 85 oc 2 data rate dr - 155 - mbps note 2: please refer to ordering information
- 2 - p/n: c-13-155(c)-t(3)-sscx(-g5) 155 mbps single mode transceive r ds-5372 rev 0.0 2009-04-30 table 3 ? transmitter specifications (optical) parameter symbol min. typical max. unit notes optical transmit power p o -15 - -8 dbm 3 optical transmit power p o -5 - 0 dbm 4 optical transmit power p o -3 - 3 dbm 5 optical transmit power p o 0 - 5 dbm 6 output center wavelength 1261 1310 1360 nm 7 output center wavelength 1263 1310 1360 nm 8 output center wavelength 1290 1310 1330 nm 9 output spectrum width ? - - 7.7 nm 10 output spectrum width ? - - 3 nm 11 output spectrum width ? - - 2.5 nm 12 extinction ratio er 8.2 - - db 13 extinction ratio er 10 - - db 14 output eye compliant with itu-t recommendation g.957 optical rise/fall time t r /t f - - 2 ns 15 relative intensity noise rin - - -116 db/hz total jitter t j - - 1.2 ns 16 note 3, 7, 10, 13: c-13-155(c)-t(3)-ssc3 note 4, 8, 11, 14: c-13-155(c)-t(3)-ssc5 note 5, 9, 12, 14: c-13-155(c)-t(3)-ssc7 note 6, 9, 12, 14: c-13-155(c)-t(3)-ssc9 note 15: 10% to 90% values note 16: measured with 2 23 -1 prbs with 72 ones and 72 zeros table 4 ? transmitter specifications (electrical) parameter symbol min. typical max. unit notes power supply current i cc - - 160 ma 17 data input current-low i il -350 - - a data input current-high i ih - - 350 a differential input voltage v ih -v il 300 - - mv data input voltage-low v il -v cc -2.0 - -1.58 v data input voltage-high v ih -v cc -1.1 - -0.74 v 18 note 17: maximum current is specified at v cc = maximum @ maximum temperature note 18: these inputs are compatible with 10k, 10kh and 100k ecl and pecl inputs
- 3 - p/n: c-13-155(c)-t(3)-sscx(-g5) 155 mbps single mode transceive r ds-5372 rev 0.0 2009-04-30 table 5 ? receiver specifications (optical) parameter symbol min. typical max. unit notes sensitivity - - - -34 dbm 19 sensitivity - - - -35 dbm 20 sensitivity - - - -37 dbm 21 maximum input power p in -7 - - dbm 22 maximum input power p in 0 - - dbm 23 signal detect-asserted pa - - -34 dbm 24 signal detect-asserted pa - - -35 dbm 25 signal detect-asserted pa - - -37 dbm 26 signal detect-deasserted pd -47 - - dbm 27 signal detect-hysteresis - 1.0 - 4.0 db wavelength of operation 1100 - 1600 nm note 19: measured with 2 23 -1 prbs with 72 ones and 72 zeros. c-13-155(c)-t(3)-ssc3 note 20: measured with 2 23 -1 prbs with 72 ones and 72 zeros. c-13-155(c)-t(3)-ssc5 note 21: measured with 2 23 -1 prbs with 72 ones and 72 zeros. c-13-155(c)-t(3)-ssc7(9) note 22: c-13-155(c)-t(3)-ssc3 note 23: c-13-155(c)-t(3)-ssc5(7/9) note 24: measured on transition: low to high. c-13-155(c)-t(3)-ssc3 note 25: measured on transition: low to high. c-13-155(c)-t(3)-ssc5 note 26: measured on transition: low to high. c-13-155(c)-t(3)-ssc7(9) note 27: measured on transition: high to low table 6 ? receiver specifications (electrical) parameter symbol min. typical max. unit notes power supply current i cc - - 100 ma 28 data output voltage-low v ol -v cc -2 - -1.58 v data output voltage-high v oh -v cc -1.1 - -0.74 v 29 signal detect output voltage-low v sdl -v cc -2 - -1.58 v signal detect output voltage-high v sdh -v cc -1.1 - -0.74 v 30 signal detect output voltage-low v sdl -v cc - - 0.5 v signal detect output voltage-high v sdh -v cc 2.0 - - v 31 note 28: the current excludes the output load current note 29: these outputs are compatible with 10k, 10kh and 100kecl and lvpecl outputs. note 30: pecl/lvpecl, c- 13-155-t(3)-ssc3(5/7/9) note 31: ttl/lvttl, c-13-155c-t(3)-ssc3(5/7/9)
- 4 - p/n: c-13-155(c)-t(3)-sscx(-g5) 155 mbps single mode transceive r ds-5372 rev 0.0 2009-04-30 connection diagram table 7 ? pin definitions pin unit notes 1 rxgnd directly connect this pi n to the receiver ground plane 2 rd+ see recommended circuit schematic 3 rd- see recommended circuit schematic 4 sd active high on this indicates a received optical section 5 rxv cc dc power for the receiver section 6 txv cc dc power for the transmitter section 7 td- see recommended circuit schematic 8 td+ see recommended circuit schematic 9 txgnd directly connect this pin to the transmitter ground plane
- 5 - p/n: c-13-155(c)-t(3)-sscx(-g5) 155 mbps single mode transceive r ds-5372 rev 0.0 2009-04-30 recommended circuit schematic c-13-155-t(3)-ssc3(5/7/9) 1 2 3 4 5 97 86 rx vcc tx vcc transceiver top view no internal connection no internal connection c2 c1 c4 l2 c3 l1 rx vcc tx vcc vcc tx vcc rx vcc rd + rd - sd td + td - r8 r10 r9 r7 c6 c5 r1 r3 r2 r4 r5 r6 notes +3.3v: r1=r3=r5=r7=r9=130 r2=r4=r6=r8=r10=82 c1=c2=c3=c5=c6=0.1 f c4=10 f l1=l2=1 h notes +5v: r1=r3=r5=r7=r9=82 r2=r4=r6=r8=r10=130 c1=c2=c3=c5=c6=0.1 f c4=10 f l1=l2=1 h c-13-155c-t(3)-ssc3(5/7/9) 1 2 3 4 5 97 86 rx vcc tx vcc transceiver top view no internal connection no internal connection c2 c1 c4 l2 c3 l1 rx vcc tx vcc vcc tx vcc rx vcc rd + rd - sd td + td - r6 r8 r7 c6 c5 r1 r3 r2 r4 r5 notes +3.3v: r1=r3=r5=r7=130 r2=r4=r6=r8=82 c1=c2=c3=c5=c6=0.1 f c4=10 f l1=l2=1 h notes +5v: r1=r3=r5=r7=82 r2=r4=r6=r8=130 c1=c2=c3=c5=c6=0.1 f c4=10 f l1=l2=1 h the split-loaded terminations for ecl sign als need to be located at the input of devices receiving those ecl signals. the power supply filtering is required for good emi performan ce. use short tracks from the inductor l1/l2 to the module rx vcc. / tx vcc. a gnd plane under the module is required for good emi and sensitivity performance.
- 6 - p/n: c-13-155(c)-t(3)-sscx(-g5) 155 mbps single mode transceive r ds-5372 rev 0.0 2009-04-30 package diagram (10.4 mm sc transceiver assembly) c-13-155(c)-t(3)-ssc3(5/7/9)a top view front view package diagram (9.8 mm sc transceiver assembly) c-13-155(c)-t(3)-ssc3(5/7/9) rear view side view top view front view units: mm blank/a: black case units: mm c/d: black case b/e: blue case
- 7 - p/n: c-13-155(c)-t(3)-sscx(-g5) 155 mbps single mode transceive r ds-5372 rev 0.0 2009-04-30 order information table 8 ? order information part no. part no. part no. part no. c-13-155-t(3)-ssc3 c-13-155-t(3)-ssc5 c-13-155-t(3)-ssc7 c-13-155-t(3)-ssc9 c-13-155c-t(3)-ssc3 c-13-155c-t(3)-ssc5 c-13-155c-t(3)-ssc7 c-13-155c-t(3)-ssc9 c-13-155-t(3)-ssc3a c-13-155-t(3)-ssc5a c-13-155-t(3)-ssc7a c-13-155-t(3)-ssc9a c-13-155c-t(3)-ssc3a c-13-155c-t(3)-ssc5a c-13-155c-t(3)-ssc7a c-13-155c-t(3)-ssc9a c-13-155-t(3)-ssc3b c-13-155-t(3)-ssc5b c-13-155-t(3)-ssc7b c-13-155-t(3)-ssc9b c-13-155c-t(3)-ssc3b c-13-155c-t(3)-ssc5b c-13-155c-t(3)-ssc7b c-13-155c-t(3)-ssc9b c-13-155-t(3)-ssc3c c-13-155-t(3)-ssc5c c-13-155-t(3)-ssc7c c-13-155-t(3)-ssc9c c-13-155c-t(3)-ssc3c c-13-155c-t(3)-ssc5c c-13-155c-t(3)-ssc7c c-13-155c-t(3)-ssc9c d-13-155-t(3)-ssc3d d-13-155-t(3)-ssd5d d-13-155-t(3)-ssd7d d-13-155-t(3)-ssd9d d-13-155c-t(3)-ssc3d d-13-155c-t(3)-ssd5d d-13-155c-t(3)-ssd7d d-13-155c-t(3)-ssd9d d-13-155-t(3)-ssc3e d-13-155-t(3)-ssd5e d-13-155-t(3)-ssd7e d-13-155-t(3)-ssd9e d-13-155c-t(3)-ssc3e d-13-155c-t(3)-ssd5e d-13-155c-t(3)-ssd7e d-13-155c-t(3)-ssd9e c-13-155-t(3)-ssc3-g5 c-13-155-t(3)-ssc5-g5 c-13-155-t(3)-ssc7-g5 c-13-155-t(3)-ssc9-g5 c-13-155c-t(3)-ssc3-g5 c-13-155c -t(3)-ssc5-g5 c-13-155c-t(3)-ssc 7-g5 c-13-155c-t(3)-ssc9-g5 c-13-155-t(3)-ssc3a-g5 c-13-155- t(3)-ssc5a-g5 c-13-155-t(3)-ssc 7a-g5 c-13-155-t(3)-ssc9a-g5 c-13-155c-t(3)-ssc3a-g5 c-13-155c-t(3)-ssc5a-g5 c-13-155c-t(3)-ssc7a-g5 c-13-155c-t(3)-ssc9a-g5 c-13-155-t(3)-ssc3b-g5 c-13-155- t(3)-ssc5b-g5 c-13-155-t(3)-ssc 7b-g5 c-13-155-t(3)-ssc9b-g5 c-13-155c-t(3)-ssc3b-g5 c-13-155c-t(3)-ssc5b-g5 c-13-155c-t(3)-ssc7b-g5 c-13-155c-t(3)-ssc9b-g5 c-13-155-t(3)-ssc3c-g5 c-13-155-t(3)-ssc5c-g5 c-13-155-t(3)-ssc7c-g5 c-13-155-t(3)-ssc9c-g5 c-13-155c-t(3)-ssc3c-g5 c-13-155c-t(3)-ssc5c-g5 c-13-155c-t(3)-ssc7c-g5 c-13-155c-t(3)-ssc9c-g5 d-13-155-t(3)-ssc3d-g5 d-13-155-t(3)-ssd5d-g5 d-13-155-t(3)-ssd7d-g5 d-13-155-t(3)-ssd9d-g5 d-13-155c-t(3)-ssc3d-g5 d-13-155c-t(3)-ssd5d-g5 d-13-155c-t(3)-ssd7d-g5 d-13-155c-t(3)-ssd9d-g5 d-13-155-t(3)-ssc3e-g5 d-13-155- t(3)-ssd5e-g5 d-13-155-t(3)-ssd 7e-g5 d-13-155-t(3)-ssd9e-g5 d-13-155c-t(3)-ssc3e-g5 d-13-155c-t(3)-ssd5e-g5 d-13-155c-t(3)-ssd7e-g5 d-13-155c-t(3)-ssd9e-g5
- 8 - p/n: c-13-155(c)-t(3)-sscx(-g5) 155 mbps single mode transceive r ds-5372 rev 0.0 2009-04-30 part numbering definition: c - 13 - 155(c) - t(3) - s sc txpower te mperature and package -rohs wavelength : 13 = wavelength 1310nm communication protocol (155mbps) 155 = pecl signal detection output 155c = ttl signal detection output t = +5v transceiver, fp t3= +3.3v transceiver, fp single mode fiber connector options tx power range 3= -15 to -8 dbm 5= -5 to 0 dbm 7= -3 to +3 dbm 9= 0 to +5 dbm temperature range and package blank = commercial temperature(0 to 70 o c), 10.4 mm, black case a = industrial temperature(-40 to 85 o c), 10.4 mm, black case b = industrial temperature(-40 to 85 o c), 9.8 mm, blue case c = industrial temperature(-40 to 85 o c), 9.8 mm, black case d = commercial temperature(0 to 70 o c), 9.8 mm, black case e = commercial temperature(0 to 70 o c), 9.8 mm, blue case rohs blank = rohs non-compliant product g5 = rohs 5/6-compliant product (lead exemption)
- 9 - p/n: c-13-155(c)-t(3)-sscx(-g5) 155 mbps single mode transceive r ds-5372 rev 0.0 2009-04-30 warnings handling precautions: this device is susceptible to damage as a resu lt of electrostatic di scharge (esd). a static free environment is highly recommended. follow guide lines according to proper esd procedures. laser safety: radiation emitted by laser devices can be dangerou s to human eyes. avoid eye exposure to direct or indirect radiation. legal notice important notice! all information contained in this document is subject to change without notice, at source photonics? sole and absolute discretion. source photonics warrants performance of its products to current specifications only in accordance with the company?s standard one-year warranty; however, specifications designated as ?preliminary? are given to describe components only, and source photoni cs expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warr anties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. please re fer to the company?s terms and conditions of sale for further warranty information. source photonics assumes no liability fo r applications assistance, customer pr oduct design, software performance, or infringement of patents, services, or intellectual proper ty described herein. no license, either express or implied, is granted under any patent right, copyright, or inte llectual property right, and source photonics makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. source photonics customers using or selling products for use in such applications do so at t heir own risk and agree to fully defend and indemnify source photonics for any damages resulting from such use or sale. the information contained in this document is pr ovided on an ?as is? basis. customer agrees that source photonics is not liable fo r any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in th is document. customer must contact source photonics to obtain the latest version of this publication to verify, befo re placing any order, that the information contained herein is current. contact u.s.a. headquarters 20550 nordhoff street chatsworth, ca 91311 usa tel: +1-818-773-9044 fax: +1-818-773-0261 sales@sourcephotonics.com china building #2&5, west export processing zone no. 8 kexin road, hi-tech zone chengdu, 611731, china tel: +86-28-8795-8788 fax: +86-28-8795-8789 sales@sourcephotonics.com.cn ? taiwan 9f, no 81, shui lee rd. hsinchu, 300, taiwan r.o.c. tel: +886-3-5169222 fax: +886-3-5169213 sales@sourcephotonics.com.tw ? copyright source photonics, inc. 2007~2008 all rights reserved
|
