axe1/axe2 1 panasonic electric works 2011.02 panasonic-electric-works.net/ac ordering information f or board-to-fpc a4us series narrow pitch connectors (0.4mm pitch) features 1. ultra-slim (mated width: 2.2 mm and mated height: 0.8 mm) the footprint when mated is down approx. 12% from our existing a4s model (50 contacts), contributing to the functionality enhancement and size reduction of target equipment. 2. structure adopted to ensure high resistance to various environments in spite of the ultra-slim space-saving body. 3. the contact at the four corners enhance the mounting strength. 4. the simple lock structure for high mating/unmating operation feel. 5. the gull-wing-shaped terminals facilitate imaging inspections. applications ?particularly suitable for board-to-fpc connections in ultra-compact mobile equipment that requires size and thickness reduction and functionality enhancement socket header 1.8mm 2.2mm compliance with rohs directive header so cket 2.2mm 1.8mm suction face: 0.7mm suction face: 0.6mm soldering terminals at the four corners soldering terminals at the four corners 12.5 mm (50 contacts) 11.8 mm (50 contacts) bellows contact construction (tough against dropping!) ni barrier construction (tough against solder rise!) po r osity treatment (tough against corrosive gases!) v notch and double contact constructions (tough against foreign particles and flux!) new surface treatment (contact portion / terminal portion) 4: base: ni plating, surface: au plating (for ni barrier available) 4: base: ni plating, surface: au plating 1: socket 2: header mated height / 1: for mated height 0.8 mm axe 4 2 1 number of contacts (2 digits) functions 2: without positioning bosses
axe1/axe2 2 product types notes: 1. order unit: f or mass production: in 1-inner carton (1-reel) units samples for mounting check: in 50-connector units. please contact our sales of?e. 2. the above part numbers are for connectors without positioning bosses, which are standard. when ordering connectors with posit ioning bosses, please contact our sales of?e. 3. please contact us for connectors having a number of contacts other than those listed above. specifications 1. characteristics 2. material and surface treatment mated height number of contacts pa rt number pa c king so cket header inner carton (1-reel) outer carton 0.8mm 10 axe110124 axe210124 5,000 pieces 10,000 pieces 14 axe114124 axe214124 20 AXE120124 axe220124 24 axe124124 axe224124 30 axe130124 axe230124 36 axe136124 axe236124 40 axe140124 axe240124 50 axe150124 axe250124 60 axe160124 axe260124 70 axe170124 axe270124 80 axe180124 axe280124 item speci?ations conditions electrical characteristics rated current 0.30a/contact (max. 5 a at total contacts) rated voltage 60v ac/dc breakdown voltage 150v ac for 1 min. no short-circuiting or damage at a detection current of 1 ma when the speci?d voltage is applied for one minute. insulation resistance min. 1,000m ? (initial) using 250v dc megger (applied for 1 min.) contact resistance max. 90m ? based on the contact resistance measurement method speci?d by jis c 5402. mechanical characteristics composite insertion force max. 0.981n/contacts contacts (initial) composite removal force min. 0.165n/contacts contacts contact holding force (socket contact) min. 0.20n/contacts measuring the maximum force. as the contact is axially pull out. environmental characteristics ambient temperature ?5 c to +85 c no freezing at low temperatures. no dew condensation. soldering heat resistance p eak temperature: 260 c or less (on the surface of the pc board around the connector terminals) infrared re?w soldering 300 c within 5 sec. 350 c within 3 sec. soldering iron storage temperature ?5 c to +85 c (product only) ?0 c to +50 c (emboss packing) no freezing at low temperatures. no dew condensation. thermal shock resistance (header and socket mated) 5 cycles, insulation resistance min. 100m ? , contact resistance max. 90m ? sequence 1. ?5 c, 30 minutes 2. ~ , max. 5 minutes 3. 85 c, 30 minutes 4. ~ , max. 5 minutes humidity resistance (header and socket mated) 120 hours, insulation resistance min. 100m ? , contact resistance max. 90m ? bath temperature 40 2 c, humidity 90 to 95% r.h. saltwater spray resistance (header and socket mated) 24 hours, insulation resistance min. 100m ? , contact resistance max. 90m ? bath temperature 35 2 c, saltwater concentration 5 1% h 2 s resistance (header and socket mated) 48 hours, contact resistance max. 90m ? bath temperature 40 2 c, gas concentration 3 1 ppm, humidity 75 to 80% r.h. lifetime characteristics insertion and removal life 30 times repeated insertion and removal speed of max. 200 times/ hours unit weight 60 contact type: socket: 0.03 g header: 0.01 g pa rt name material surface treatment molded portion lcp resin (ul94v-0) contact and p ost copper alloy contact portion: base: ni plating, surface: au plating te r minal portion: base: ni plating, surface: au plating (except the terminal tips) the socket terminals close to the portion to be soldered have nickel barriers (exposed ni ck el portions). soldering terminals: sockets: base: ni plating, surface: pd+au ?sh plating (except the terminal tips) headers: base: ni plating, surface: au plating (except the terminal tips) 0 ? 3 + 3 0
axe1/axe2 3 dimensions (unit: mm) ?socket and header are mated socket (mated height: 0.8 mm) z (note) y (note) te r minal coplanarity (contact and soldering terminals) c 0.1 a b 0.1 0.40 0.05 0.15 0.03 x x 0.30 0.03 2.20 1.24 (0.80) 1.90 0.60 (suction face) 0.77 0.08 general tolerance: 0.2 note: since soldering terminals are built into the body, the y and z parts are connected electrically. dimension table (mm) number of contacts/ dimension a b c 10 4.5 1.6 3.4 14 5.3 2.4 4.2 20 6.5 3.6 5.4 24 7.3 4.4 6.2 30 8.5 5.6 7.4 36 9.7 6.8 8.8 40 10.5 7.6 9.6 50 12.5 9.6 11.6 60 14.5 11.6 13.6 70 16.5 13.6 15.6 80 18.5 15.6 17.6 header (mated height: 0.8 mm) a b 0.1 0.40 0.05 0.15 0.03 c 0.1 0.15 0.03 x x 1.80 (0.72) (0.54) 0.70 (suction face) 0.65 te r minal coplanarity (post and soldering terminals) 0.08 soldering terminals (soldering terminals portion) general tolerance: 0.2 dimension table (mm) number of contacts/ dimension a b c 10 3.8 1.6 3.2 14 4.6 2.4 4.0 20 5.8 3.6 5.2 24 6.6 4.4 6.0 30 7.8 5.6 7.2 36 9.0 6.8 8.4 40 9.8 7.6 9.2 50 11.8 9.6 11.2 60 13.8 11.6 13.2 70 15.8 13.6 15.2 80 17.8 15.6 17.2 header so cket 1.80 0.1
axe1/axe2 4 embossed tape dimensions (unit: mm) (common to all sockets and headers) ?dimension table (unit: mm) ?connector orientation with respect to embossed tape feeding direction notes t ype/mated height number of contacts t ype of taping a b c d quantity per reel common for sockets and headers: 0.8mm max. 24 tape i 16.0 7.5 17.4 5,000 30 to 70 t ape i 24.0 11.5 25.4 5,000 80 tape ii 32.0 28.4 14.2 33.4 5,000 ?speci?ations for taping (in accordance with jis c 0806-3:1999. however, not applied to the mounting-hole pitch of some connectors.) ?speci?ations for the plastic reel (in accordance with eiaj et-7200b.) t ape i tape ii leading direction after packaging 1.5 dia. +0.1 0 1.5 dia. +0.1 0 (1.75) (1.75) (c) (c) (b) (a 0.3) (a ) (4.0) (4.0) (2.0) (2.0) 8.0 8.0 + 0.3 ? 0.1 embossed mounting-hole t aping reel t op cover tape embossed carrier tape (d 1) 380 dia. t ype direction of tape progress common for a4us socket header note: there is no indication on this product regarding top-bottom or left-right orientation. 1. regarding the design of pc board patterns conduct the recommended foot pattern design, in order to preserve the mechanical strength of terminal solder areas. 2. recommended pc board and metal mask patterns appropriate control of solder amount is required to minimize solder bridges and other defects for connectors with 0.35- mm, 0.4-mm or 0.5-mm pitch terminals, which require high-density mounting. refer to the right-hand drawing for recommended patterns. ?socket (mated height: 0.8 mm) recommended pc board pattern (top view) recommended metal mask opening pattern metal mask thickness: when 120 m (terminal opening ratio: 70%) (metal-part opening ratio: 100%) ?header (mated height: 0.8 mm) recommended pc board pattern (top view) recommended metal mask opening pattern metal mask thickness: when 120 m (terminal opening ratio: 70%) (metal-part opening ratio: 100%) c0.30 2.60 0.03 0.20 0.03 1.60 0.03 1.04 0.03 (0.78) (0.50) 0.40 0.03 0.80 0.03 1.45 0.03 0.23 0.03 : insulatin area c0.30 1.70 0.01 2.50 0.01 2.60 0.01 1.04 0.01 (0.78) (0.40) 0.40 0.01 0.20 0.01 0.80 0.01 1.45 0.01 2.20 0.03 0.90 0.03 2.20 0.03 0.50 0.03 (0.85) (0.65) 0.40 0.03 0.80 0.03 0.28 0.03 0.23 0.03 2.20 0.01 1.03 0.01 2.07 0.01 0.50 0.01 (0.85) (0.52) 0.40 0.01 0.20 0.01 0.80 0.01 0.28 0.01
5 automation controls business unit head office: 1048, kadoma, kadoma-shi, osaka 571-8686, japan telephone: +81-6-6908-1050 facsimile: +81-6-6908-5781 specifications are subject to change without notice. all rights reserved ? 2011 copyright panasonic electric works panasonic electric works co., ltd. printed in japan. panasonic-electric-works.net/ac akct1b112e 201102 notes for using advanced series narrow-pitch connectors
|
