power entry modules with line filter 5003 www.schurter.com/pg0 6 emc products appliance inlet dc filter, eco design, front- or rear side mounting screw-on mounting, front or back side pcb snap-in version molex hcs-125 connector screw-on mounting, front or back side quick connect terminals 6.3 x 0.8 mm amp universal mate-n-lok or molex mlx snap-in mounting with wires (stranded) amp universal mate-n-lok or molex mlx description - panel mount: screw-on version from front or rear side, snap-in version from front side, pcb version from rear side - 2 functions: appliance inlet, dc line filter in standard version - solder, quick connect or wires (stranded) approvals - vde certificate number: 40020642 - ul file number: e72928 characteristics - compact high-performance dc-filter optimal shielding due to completely closed filter case, unpotted - applications: - mission critical ethernet lan routers - high uptime ethernet lan switches - fiber optic wan switches - fiber optic wan multiplexer other versions on request - snap-in for panel thickness >2mm to 3mm - flexible wire with various lenghts - quick connect terminals 4.8 x 0.8 mm - capacity cy 5.5 nf - with long earth pin in connector references pcb mounting alternative: version 5120 for ac applications weblinks general product informatio n , approval s , roh s , china-roh s , mating connector s , e-stor e , schurter-stock-chec k , distributor-stock- chec k , accessorie s technical data ratings iec 15 a / 125 vdc ratings ul/csa 3 - 15 a @ ta 40 c / 125 vdc dielectric strength > 0.5 kvdc between live parts of diffe - rential potentials > 1.1 kvdc between protective conduc - tor and live parts test voltage (2 sec) allowable operation temp. -25 c to 85 c climatic category 25/085/21 acc. to iec 60068-1 protection class suitable for appliances with protection class 1 terminal quick connect terminals 6.3 x 0.8 mm litze awg 18 (15a awg 16), 150 mm panel thickness s screw: max 8 mm mounting screw torque max 0.5 nm snap-in: 0.8 mm to 2 mm (all steps with one variant) material: housing themoplast / steel tin-plated, black / metallic, ul 94v-0 line filter dc standard version, ul 1283 technical detail s mtbf > 3'900'000 h acc. to mil-hb-217 f
power entry modules with line filter 5003 www.schurter.com/pg0 6 emc products dimensions 59 mm front- or rear side mounting for screws with nuts or blind rivets, mating connector molex hcs-125 40 24.6 59 3.6 max. 30 48.6 r 3 max. 22.4 0.5 0.20 47 2 rear side mounting with pre-formed, threaded holes for m3 screws, mating connector molex hcs-125 40 24.6 59 m3x0.5 max. 30 48.6 r 3 max. 22.4 0.5 0.20 47 2 snap-in mounting from front side, mating connector molex hcs-125 24.6 59 max. 30 32.6 r 3 max. 22.4 min. 0.5 47 2
3 power entry modules with line filter 5003 www.schurter.com/pg0 6 emc products front or rear side mounting for screws with nuts or blind rivets, mating connector amp universal mate-n-lok oder molex mlx 40 24.6 52 3.6 max. 30 48.6 r 3 max. 22.4 0.5 0.20 40 10 rear side mounting with pre-formed, threaded holes for m3 screws, mating connector amp universal mate-n-lok or molex mlx 40 24.6 52 m3x0.5 max. 30 48.6 r 3 max. 22.4 0.5 0.20 40 10 snap-in mounting from front side, mating connector amp universal mate-n-lok or molex mlx 24.6 52 max. 30 32.6 r 3 max. 22.4 min. 0.5 40 10 29 40 0.1 21.5 max.r3 0.1 0.15 3.5 panel cutout for front side mounting 30.3 40 +0.20 0 22.8 max.r3 +0.20 0 0.15 3.5 panel cutout for rear side mounting
power entry modules with line filter 5003 www.schurter.com/pg0 6 emc products 21.5 0.10 max.r 1.5 29.4 0.10 panel cutout for snap-in mounting pcb snap-in rear-side mounting with pre-formed threaded holes for m3 screws, mating connector molex hcs-125 m3x0.5 max. 30 40 48.6 r 3 max. 22.4 30.3 40 +0.20 0 22.8 max.r3 +0.20 0 0.15 ?3.5 27 0.10 12 0.10 ?6 34 0.10 33.9 0.10 ?1.6 +0.10 0 0.05 min. 0.5 47 2 59 pcb rear-side mounting with pre-formed threaded holes for m3 screws, mating connector molex hcs-125 24.6 m3x0.5 max. 30 40 48.6 r 3 max. 22.4 min. 0.5 47 2 30.3 40 +0.20 0 22.8 max.r3 +0.20 0 0.15 ?3.5 12 0.10 33.9 0.10 ?1.6 +0.10 0 12 59
5 power entry modules with line filter 5003 www.schurter.com/pg0 6 emc products pcb snap-in rear-side mounting with pre-formed threaded holes for m3 screws, mating connector amp universal mate-n-lok or molex mlx 24.6 m3x0.5 42.5 max. 30 40 48.6 r 3 max. 22.4 min. 0.5 40 10 30.3 40 +0.20 0 22.8 max.r3 +0.20 0 0.15 ?3.5 27 0.10 12 0.10 ?6 27 0.10 26.9 0.10 ?1.6 +0.10 0 0.5 12 27 52 pcb rear-side mounting with pre-formed threaded holes for m3 screws, mating connector amp universal mate-n-lok or molex mlx 24.6 m3x0.5 max. 30 40 48.6 r 3 max. 22.4 min. 0.5 40 10 30.3 40 +0.20 0 22.8 max.r3 +0.20 0 0.15 12 0.10 26.9 0.10 ?1.6 +0.10 0 12 52 ?3.5
6 power entry modules with line filter 5003 www.schurter.com/pg0 6 emc products screw and snap-in mounting with flexible wire, mating connector molex hcs-125 or amp universal mate-n-lok 24.6 m3x0.5 max. 30 40 48.6 r 3 max. 22.4 min. 0.5 1.25 47 150 6.6 2 30.3 40 +0.20 0 22.8 max.r3 +0.20 0 0.15 ?3.5 59 0.20 max.r1.5 29.4 0.10 21.5 0.10 40 21.5 max.r3 0.15 m3 0.10 29 0.1 1) 3) 4) 2) 1) flexible wire, standard length 150 mm or special length on request 2) panel cut-out screw-on version, front-side mounting 3) panel cut-out, screw-on version, back-side mounting 4) panel cut-out snap-in version, front-side mounting mating connector molex hcs-125 housing: molex no. 03-12-1036 female terminal (3 needed per housing): molex no. 18-12-1222 amp universal mate-n-lok housing: amp no. 1-480700-0 female terminal (3 needed per housing): amp no. 926901-1 molex mlx housing: molex no. 50-84-1030 female terminal (3 needed per housing): molex no. 02-08-1002 technical data of filter-components rated current [a] filter-type inductances l [mh] capacitance cx [nf] capacitance cy [nf] r [m ? ] 3 dc standard version 2 x 4 100 4.7 1 6 dc standard version 2 x 0.8 100 4.7 1 10 dc standard version 2 x 0.4 100 4.7 1 15 dc standard version 2 x 0.1 100 4.7 1
power entry modules with line filter 5003 www.schurter.com/pg0 6 emc products diagrams 1) line 2) load attenuation loss . . . . . 0.1/100 ? differential mode ........... 100/0.1 ? differential mode - - - - differential mode _____ common mode standard version 3 a 6 a 10 a 15a variants rated current [a] mounting mounting side terminal mating connector order number 3 snap-in front-side quick connect terminals 6.3 x 0.8 mm molex hcs-125 5003.0131.1 3 screw rear-side quick connect terminals 6.3 x 0.8 mm molex hcs-125 5003.0121.1 3 screw-on/rivet front-/rear-side quick connect terminals 6.3 x 0.8 mm molex hcs-125 5003.0111.1 6 snap-in front-side quick connect terminals 6.3 x 0.8 mm molex hcs-125 5003.0231.1 6 screw rear-side quick connect terminals 6.3 x 0.8 mm molex hcs-125 5003.0221.1 6 screw-on/rivet front-/rear-side quick connect terminals 6.3 x 0.8 mm molex hcs-125 5003.0211.1 10 snap-in front-side quick connect terminals 6.3 x 0.8 mm molex hcs-125 5003.0331.1 10 screw rear-side quick connect terminals 6.3 x 0.8 mm molex hcs-125 5003.0321.1 10 screw-on/rivet front-/rear-side quick connect terminals 6.3 x 0.8 mm molex hcs-125 5003.0311.1 15 snap-in front-side quick connect terminals 6.3 x 0.8 mm molex hcs-125 5003.0431.1 15 screw rear-side quick connect terminals 6.3 x 0.8 mm molex hcs-125 5003.0421.1 15 screw-on/rivet front-/rear-side quick connect terminals 6.3 x 0.8 mm molex hcs-125 5003.0411.1 3 snap-in front-side quick connect terminals 6.3 x 0.8 mm amp / molex mlx 5003.1131.1 3 screw rear-side quick connect terminals 6.3 x 0.8 mm amp / molex mlx 5003.1121.1 3 screw-on/rivet front-/rear-side quick connect terminals 6.3 x 0.8 mm amp / molex mlx 5003.1111.1 6 snap-in front-side quick connect terminals 6.3 x 0.8 mm amp / molex mlx 5003.1231.1 6 screw rear-side quick connect terminals 6.3 x 0.8 mm amp / molex mlx 5003.1221.1 6 screw-on/rivet front-/rear-side quick connect terminals 6.3 x 0.8 mm amp / molex mlx 5003.1211.1 10 snap-in front-side quick connect terminals 6.3 x 0.8 mm amp / molex mlx 5003.1331.1 10 screw rear-side quick connect terminals 6.3 x 0.8 mm amp / molex mlx 5003.1321.1 10 screw-on/rivet front-/rear-side quick connect terminals 6.3 x 0.8 mm amp / molex mlx 5003.1311.1 15 snap-in front-side quick connect terminals 6.3 x 0.8 mm amp / molex mlx 5003.1431.1 15 screw rear-side quick connect terminals 6.3 x 0.8 mm amp / molex mlx 5003.1421.1 15 screw-on/rivet front-/rear-side quick connect terminals 6.3 x 0.8 mm amp / molex mlx 5003.1411.1 type for screw on mounting from rear side has pre-threaded holes for m3 screws packaging unit 10 pcs technical data of filter-components rated current [a] filter-type inductances l [mh] capacitance cx [nf] capacitance cy [nf] r [m ? ] 3 dc standard version 2 x 4 100 4.7 1 6 dc standard version 2 x 0.8 100 4.7 1 10 dc standard version 2 x 0.4 100 4.7 1 15 dc standard version 2 x 0.1 100 4.7 1
power entry modules with line filter 5003 www.schurter.com/pg0 6 emc products accessorie s description assorted cover s rear cover 0859.0048 cord retaining kit s cord retaining strain relief flat head, z 0888.0021 flat head, e 4700.0005 flat head, g 4700.0007 the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|
