mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. mtronptis m610x series tcxos and tcvcxos provide network and wireless engineers with low voltage, surface mount products with tight stability over temperature and time. mtronptis unique approach to crystal compensation enables these devices to achieve full stratum 3 temperature stability including holdover over -40 c to +85 c. specially processed crystals enable the m610x to achieve consistent long-term stability and minimal frequency shift after refow . our processing also enables us to achieve excellent g-sensitivity (1.5 ppb/g). the low phase noise (-155 dbc/hz at 100 khz) makes the m610x ideal for those design engineers working on high data-rate, low ber data communication network products. the m610x series is ideally suited for a wide range of applications such as sonet, sdh, serdes, gsm, cdma, 3g, 4g, gig-ethernet, 10g and 40g systems. standard output for the m610x series is hcmos compatible or clipped sinewave and draws as little as 1.5 ma with a 3.3 volt supply at 13 mhz. this low power consumption provides an advantage over simi - larly specifed ovenized oscillators for power-sensitive applications. the m610x series offers 9.2 ppm minimum pull range with excellent tuning linearity performance for critical pll applications. this series is available in frequencies from 8 to 52 mhz, and is offered in a ceramic surface mount platform with industry standard 5 x 7 mm footprint. product features product description product applications product ordering information m610x series stratum 3 5 x 7 mm, 3.0, 3.3 & 5.0 volt, hcmos or clipped sinewave, precision tcxo/tcvcxo stratum 3 performance with hold-over ? stabillity (0.32 ppm) over industrial temperature range (-40 c to +85 c) 3.0 v, 3.3 v and 5.0 v versions ? wide frequency range 8-52 mhz ? low phase noise ? excellent g-sensitivity performance: 1.5 ppb/g ? tri-state function ? m6100sxxx, m6101sxxx & m6102sxxx - contact factory for datasheets. revision: 4-14-08
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. 2 mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. performance characteristics m610x series stratum 3 5 x 7 mm, 3.0, 3.3 & 5.0 volt, hcmos or clipped sinewave, precision tcxo/tcvcxo
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. 3 phase noise plot m610x series stratum 3 5 x 7 mm, 3.0, 3.3 & 5.0 volt, hcmos or clipped sinewave, precision tcxo/tcvcxo output waveform
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. 4 mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. product dimension & pinout information m610x series stratum 3 5 x 7 mm, 3.0, 3.3 & 5.0 volt, hcmos or clipped sinewave, precision tcxo/tcvcxo
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. 5 handling information quality parameters part marking guide m610x series stratum 3 5 x 7 mm, 3.0, 3.3 & 5.0 volt, hcmos or clipped sinewave, precision tcxo/tcvcxo although protection circuitry has been designed into the m610x oscillator, proper precautions should be taken to avoid exposure to electrostatic discharge (esd) during handling and mounting. mtronpti utilizes a human-body model (hbm) and a charged-device model (cdm) for esd-susceptibility testing and protection design evaluation. esd voltage thresholds are dependent on the circuit parameters used to defne the mode. although no industry- wide standard has been adopted for the cdm, a standard hbm (resistance = 1500 ? , capacitance = 100 pf) is widely used and therefore can be used for comparison purposes. the hbm esd threshold presented here was obtained using these circuit parameters. line 1: indicates part family, year, month of production line 2: indicates frequency
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. 6 maximum soldering conditions tape & reel specifcations (all measurements are in mm) a b c d e f g h j k l m n m610x 5.40 7.40 1.55 7.50 2.60 2.00 4.00 16.00 330 13.00 20.20 100 16.40 standard tape and reel: 1000 parts per reel solder conditions note: exceeding these limits may damage the device. m610x series stratum 3 5 x 7 mm, 3.0, 3.3 & 5.0 volt, hcmos or clipped sinewave, precision tcxo/tcvcxo
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact mtronpti for your application specifc requirements at 800.762.8800 toll free or 605.665.9321. 7 date revision pcn number details of revision for custom products or additional specifcations contact our sales team at 800.762.8800 (toll free) or 605.665.9321 for more information on this product visit the mtronpti website at www.mtronpti.com o ircit picl et ircit 610 erie trtm 3 5 7 mm 3.0 3.3 5.0 olt or lippe inewe reciion roct eiion le load circuit #2 - hcmos load circuit #7 - clipped sinewave tcxo/tcvcxo
|
