lz (alz) specifications 16a low profile power relay lz relays (alz) vde mm inch 15.7 12.5 28.8 .618 .492 1.134 15.6 12.5 28.8 .614 .492 1.134 compliance with rohs directive features 1. low pro?e type with height of 15.7 mm slim, low pro?e type with dimensions of 28.8 (l) 12.5 (w) 15.7 (h) mm 1.134 (l) .492 (w) .618 (h) inch. 2. high insulation resistance superior insulation characteristics have been achieved by maintaining an insulation distance between coil and contacts of at least 10 mm for both creepage distance and clearances. furthermore, anti-surge voltage is 10 kv and higher. (supports european reinforced insulation requirement.) 3. superior heat resistance can be used in ambient temperatures up to 85 c 185 f for the class b and 105 c 221 f for the class f. 4. low operating power pow er saved with a nominal operating power of only 400 mw. 5. conforms to the various safety standards: ul, c-ul, vde approved. 6. superior heat resistance and tracking resistance en60335-1 gwt compliant (tested by vde) type available (excluding tmp type) 7. tmp type also available. contact coil #1 this value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. remarks * speci?ations will vary with foreign standards certi?ation ratings. * 1 measurement at same location as ?nitial breakdown voltage section. * 2 detection current: 10ma * 3 wa ve is standard shock voltage of 1.2 50 s according to jec-212-1981 * 4 excluding contact bounce time. * 5 half-wave pulse of sine wave: 11 ms; detection time: 10 s * 6 half-wave pulse of sine wave: 6 ms * 7 detection time: 10 s * 8 the upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. refer to 6. conditions for operation, t r anspo r t and sto r age mentioned in ambient envi r onment. * 9 class f type is ambient temperature 105 c 221 f . *please note that some of the speci?ations listed above may not comply with ov erseas standards. characteristics arrangement 1 form a, 1 form c and 1 form a (tmp type) initial contact resistance, max. (by voltage drop 6v dc 1a) 100m ? contact material agsno 2 type rating (resistive load) nominal switching capacity 16a 250v ac max. switching power 4,000v a max. switching voltage 440v ac max. switching current 16a min. switching capacity #1 (reference value) 100ma, 5v dc expected life (min. operations) mechanical (at 180 cpm) 1 form a/1 form c: 1 10 7 1 form a (tmp type) 5 10 6 electrical (at 20 cpm) (rated load) 1 form a/1 form c: n.o.: 10 5 , n.c.: 5 10 4 1 form a (tmp type) 10 5 nominal operating power 400mw max. operating speed 20 cpm (at rated load) initial insulation resistance* 1 min. 1,000 m ? (at 500v dc) initial breakdown voltage* 2 between open contacts 1,000 vrms for 1 min. between contacts and coil 5,000 vrms for 1 min. initial surge voltage between contact and coil* 3 10,000 v operate time* 4 (at nominal voltage) max. 15ms (at 20 c 68 f ) release time (without diode)* 4 (at nominal voltage) max. 5ms (at 20 c 68 f ) temperature rise (20 c 68 c ) max. 55 c with nominal coil voltage and at 16a contact carrying current (resistance method) shock resistance functional* 5 100 m/s 2 {approx. 10 g} destructive* 6 1,000 m/s 2 {approx. 100 g} vibration resistance functional* 7 1 form a/1 form c: 10 to 55hz at double amplitude of 0.8mm 1 form a (tmp type): 10 to 55hz at double amplitude of 1.5mm destructive 10 to 55hz at double amplitude of 1.5mm conditions for operation, transport and storage* 8 (not freezing and condensing at low temperature) ambient temp. ?0 c to +85 c ?0 f to +185 f (class b)* 9 humidity 5 to 85% r.h. unit weight 1 form a/1 form c: approx. 12 g .42 oz 1 form a (tmp type): approx. 13 g .46 oz all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
lz (alz) typical applications ordering information types notes: 1. tube packing: inner carton: 20pcs.; case: 800pcs. 2. carton packing: inner carton: 100pcs.; case: 500pcs. 3. if you desire tube packaging, please order without adding the packaging symbol ? to the end of the part number. (note that only carton packaging is possible for 1 form a tmp type.) 4. carton packing symbol ? is not marked on the relay. 5. en60335-1 gwt compliant types available. when ordering, please add suf? ?? (en60335-1 gwt compliant type is not available for the tmp types.) ex. alz21b12t , alz21f12t w coil data * only 1 form c and 1 form a types are available for 48 v (excluding tmp type). contact arrangement coil voltage, v dc carton packing class b class f 1 form c 5 alz11b05w alz11f05w 9 alz11b09w alz11f09w 12 alz11b12w alz11f12w 18 alz11b18w alz11f18w 24 alz11b24w alz11f24w 48 alz11b48w alz11f48w 1 form a 5 alz21b05w alz21f05w 9 alz21b09w alz21f09w 12 alz21b12w alz21f12w 18 alz21b18w alz21f18w 24 alz21b24w alz21f24w 48 alz21b48w alz21f48w 1 form a (tmp type) 5 alz71b05w alz71f05w 9 alz71b09w alz71f09w 12 alz71b12w alz71f12w 18 alz71b18w alz71f18w 24 alz71b24w alz71f24w nominal voltage, v dc pick-up voltage, v dc (max.) drop-out voltage, v dc (min.) coil resistance, ? ( 10%) nominal operating current, ma ( 10%) nominal operating power, mw maximum allowable v oltage, v dc 5 3.5 0.5 63 80 400 6.5 9 6.3 0.9 203 44.4 11.7 12 8.4 1.2 360 33.3 15.6 18 12.6 1.8 810 22.2 23.4 24 16.8 2.4 1,440 16.7 31.2 48* 33.6 4.8 5,760 8.3 62.4 1) household electrical appliances tv, catv, audio equipment, microwave ov ens, and heaters, etc. 2) of?e equipment copy machines, packaged air conditioners, and vending machines 3) industrial equipment machine tools, robots, and temperature controllers aex. lz 1 1 b 1 2 w notes: 1. only 1 form c and 1 form a types are available for 48 v (excluding tmp type). 2. ul, c-ul, vde approved type is standard. 3. sealed type is also available. (excluding tmp type.) please consult us. 4. if you desire tube packaging, please order without adding the packaging symbol ??to the end of the part number. lz 1: 1 form c 2: 1 form a 7: 1 form a (tmp type) 1: flux-resistant type b: f: class b insulation class f insulation 05: 5 18: 18 09: 9 24: 24 12: 12 48: 48 product name contact arrangement protective construction coil insulation class coil voltage,* v dc w: carton packing packing style nil: t: en60335-1 (conform) (excluding tmp type.) flame resistance and tracking resistance all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
lz (alz) dimensions mm inch 1. 1 form a type 28.8 5 0.50.5 202.5 15.7 3.5 0.5 12.5 7.5 0.8 1.134 .197 .020.020 .787.098 .618 .138 .020 .492 .295 .031 pc board pattern tolerance: 0.1 .004 schematic (bottom view) 20 7.5 5 6-1.3 dia. .787 .295 .197 6-.051 dia. coil 2. 1 form c type 28.8 5 5 12.5 7.5 15.7 3.5 0.5 0.8 0.5 0.5 202.5 1.134 .197 .197 .492 .295 .618 .138 .020 .031 .020 .020 .787.098 pc board pattern tolerance: 0.1 .004 schematic (bottom view) 20 7.5 55 8-1.3 dia. .787 .295 .197 .197 8-.051 dia. coil 3. 1 form a (tmp type) 32.5 5.0 0.5 .020 6.4 1.0 1.0 .039 .039 28.8 .2521.134 12.5 1.280 .197 .492 0.8 .031 7.5 .295 15.6 .614 0.4 .016 3.6 .142 14.2 .559 9.5 .374 pc board pattern tolerance: 0.1 .004 schematic (bottom view) 5.0 32.5 .1971.280 4-.059 dia. 2-.051 dia. 4-1.5 dia. 2-1.3 dia. 7.5 .295 coil all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
lz (alz) reference data for cautions f or us e , see rel a y t e c hnical in f ormation. 1. max. switching power (ac resistive load) 2. max. switching power (dc resistive load) 3. coil temperature rise sample: alz11f12, 5pcs. measured portion: coil inside contact current: 0 a, 16 a 10 130 1000 1 10 16 100 100 440 contact voltage, v contact current, a 100 1 10 100 100 contact current, a contact voltage, v 1000 120 125110 115105 130 135 30 25 35 40 50 45 55 20 normal temperature normal temperature 16a 0a 85 c 105 c 85 c 105 c temperature rise, c coil applied voltage, %v all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
|