pj1117 1 amp low dropout positive voltage regulator 1-6 2004/09.rev.f he pj1117 series are high performance positive voltage regulators designed for use in applications requiring low dropout performance at fu ll rated current, additionally, the pj1117 series provides excellent regulation over variations due to changes in line, load and temperature. outstanding features include low dropout performance at rated current, fast transient response. the pj1117 series are three terminal regulators with fixed and adjustable voltage options available in popular packages. y low dropout performance 1.1 v(typ.). y full current rating over line and temperature y fast transient response y 2%total output regulation over line, load and temperature y adjust pin current max 120 a over temperature y fixed/adjustable output voltage y to-220, to-263, to-252& sot-223 package to-220 to-263 pin: 1.adj (com) pin: 2.out pin: 3.in to-252 sot-223 device operating temperature package pj1117cz-xx to-220 pj1117cm-xx to-263 pj1117cw-xx sot-223 pj1117cp-xx -20 to +85 o c to-252 note: xx is output voltage available for adj/1.8v/2.5v/2.85v/3.3v/5.0v contact factory for additional voltage option. parameter symbol maximum units input voltage v in 7 v power dissipation p d internally limited w to-220 2.5 to-252 5 thermal resistance junction to case sot-223 jc 15 to-220 50 to-252 90 thermal resistance junction to ambient sot-223 ja 160 operating junction temperature range t j 0 to 125 o c / w storage temperature range t stg -65 to 150 lead temperature (soldering) 10 sec. t lead 260 o c t absolute maximum rating ordering infromation features
pj1117 1 amp low dropout positive voltage regulator 2-6 2004/09.rev.f test limits parameter symbol test conditions min typ max units v in = 4.75v to 7v, io = 10ma 0.99|vo| 1.01|vo| output voltage (1) fixed voltage vo v in = 4.75v to 7v, io = 1a 0.98|vo| vo 1.02|vo| v in = 2.75v to 7v, io = 10ma 1.238 1.262 reference voltage (1) adj voltage v ref v in = 2.75v to 7v, io = 1a 1.225 1.250 1.275 v line regulation (1) r line v in = 4.75v to 7v, io = 10ma -- 1 10 mv load regulation (1) r load v in = 4.75v to 7v, io = 10ma~1a -- 1 15 mv io = 100ma -- 1 1.10 io = 500ma -- 1.05 1.15 dropout voltage v d io = 1a -- 1.15 1.30 v current limitx i cl 1.0 1.1 -- a quiescent current fixed model i q v in = 4.75v to 7v, io = 0a -- 12 14 ma temperature coefficient tc -- 0.005 -- %/ adjust pin current i adj -- 55 120 adjust pin current change ? i adj v in = 4.75v to 7v, io = 10ma~1a -- 0.2 5 a temperature stability ts -- 0.5 -- % minimum load current adjust model io v in = 2.75v to 7v -- 5 14 ma rms output noise (2) v n b=10hz to 10khz, t j =25 -- 100 -- v ripple rejection ratio (3) r a io =40ma, f = 120hz 60 72 -- db (1)low duty cycle pulse testing with kelvin connections required. (2)bandwidth of 10hz to 10khz. (3)120hz input ripple (c adj for adj) =25 f . electrical characteristics (ta=25 cin=10f, cout=10f; unl ess otherwise specified.) block diagram
pj1117 1 amp low dropout positive voltage regulator 3-6 2004/09.rev.f (1) c1 needed if device is far from filter capacitors (2) c2 required for stability (1) c1 needed if device is far from filter capacitors (2) c2 required for stability
pj1117 1 amp low dropout positive voltage regulator 4-6 2004/09.rev.f
pj1117 1 amp low dropout positive voltage regulator 5-6 2004/09.rev.f to-220 mechanical drawing 1.top view 2.side view c o e d f a b n g m i j k l h 0.102 2.60 2.50 0.098 e 6.40 6.10 m 1.10 14.70 o n 1.40 14.90 2.20 4.40 13.80 1.24 28.60 8.40 0.36 i l k j h g f 28.80 2.90 8.70 0.40 4.80 14.00 1.28 0.252 0.240 0.043 0.578 0.055 0.587 1.125 0.086 0.330 0.014 0.177 0.048 0.543 1.134 0.114 0.343 0.016 0.189 0.551 0.050 to-220-3l dimension millimeters 2.65 3.70 10.00 min 0.80 d c b a dim 2.80 3.90 0.90 10.45 max inches 0.031 0.104 0.145 0.393 min 0.110 0.154 0.035 0.411 max to-263 mechanical drawing 1.top view 2.side view c d b a e i h g f 10.00 14.60 min 4.40 2.40 0.30 1.10 8.50 0.75 1.14 millimeters a g h i d e f b c dim 0.413 10.50 0.393 0.50 0.011 8.70 1.40 0.334 0.044 15.87 2.60 4.65 1.40 0.90 0.094 0.173 0.043 0.574 0.029 0.020 0.343 0.055 0.102 0.183 0.055 0.625 0.035 inches to-263-3l dimension max min max
pj1117 1 amp low dropout positive voltage regulator 6-6 2004/09.rev.f to-252 mechanical drawing 1.top view 2.side view b c d a i g h j e f 2.28bsc millimeters 5.40 i j 1.55 0.55 c 0.45 f g h 1.20 0.40 d e 2.18 dim min a b 6.50 9.30 0.212 5.55 0.219 0.069 1.75 0.061 0.026 0.026 0.055 0.024 0.094 max 0.264 0.386 0.021 0.65 0.65 1.40 0.60 2.38 0.017 0.047 0.015 0.090bsc 0.085 to-252 dimension max 6.70 9.80 min 0.255 0.366 inches sot-223 mechanical drawing 1.top view 2.side view f g e h a d b c k l j a1 i millimeters 2.90 b l 0.90 i k j 0.25 1.55 10 4.55 e f g h 2.25 0.83 6.70 c d 3.45 0.60 dim a a1 6.35 0.02 min 0.122 0.114 3.10 - 0.36 1.80 16 0.035 - 0.010 10 0.061 0.014 16 0.071 4.65 2.35 1.04 7.30 3.75 0.80 0.183 0.179 0.088 0.032 0.263 0.093 0.041 0.287 0.136 0.023 0.148 0.031 sot-223 dimension 6.85 0.10 max - 0.250 min 0.270 0.004 max inches
|
