a17 2.54mm pitch card edge connector cr22 series product standards rating current rating: 3a voltage rating: 300vac operating temperature range: - 30 to + 85 ? (note 1) operating humidity range: 40 to 80 % storage temperature range: - 10 to + 60 ? (note 2) storage humidity range: 40 to 70 % (note 2) note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. 500v dc 1000v ac/1 minute. 100ma frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40? and humidity of 90% to 95% 500 cycles manual soldering: 300? for 3 seconds 1000m ohms min. no flashover or insulation breakdown. 20 m ohms max. no electrical discontinuity of 10s or more insulation resistance : 1000m ohms min. contact resistance : 20m ohms max. no deformation of components affecting performance. no damage, cracks, or parts looseness. (-65 ? : 30 minutes 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes 15 to 35 ? : 5 minutes max.) 5 cycles 1.insulation resistance 2.withstanding voltage 3.contact resistance 4. vibration 5. humidity(steady state) 6.temperature cycle 7. durability (mating/un-mating) 8. resistance to soldering heat item specification condition selective gold plated tin-lead plated material parts material finish remarks insulator contact pbt copper alloy black contact area lead area ul94v-0 --------------- --------------- features 1. 2.54mm pitch contact 2. variation in number of contacts 20, 30, 34, 36, 44, 50, 60, 62, 68, 72, 80,100, and 120 contacts are available. 3. board mount type straight dip and right angle through hole types are available. 4. to prevent mis-insertion in the board using the polarizing key prevents mis-insertion in the printed board. ordering information cr22 a - 50 d - 2.54 ds 1 3 5 2 4 6 series name : cr22 blank : with mounting hole a : without mounting hole b : card edge 7.62mm type with mounting hole c : card edge 7.62mm type without mounting hole d : versa bus type with mounting hole e : versa bus type without mounting hole contact alignment : d : double side contact pitch : 2.54mm contact type ds : straight type dsa : right angle type number of contacts : 20, 30, 34, 36, 44, 50, 60, 62, 68, 72, 80, 100, 120 1 2 3 4 5 6 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a18 straight through hole type unit: mm note : the 120 contacts type differs in configuration. c part number cl no. b d e a number of contacts 20 30 34 44 50 68 72 80 100 120 49.04 61.74 66.82 79.52 87.14 84.71 110 .00 115.08 125.24 150.64 176.04 41.44 54.14 59.22 71.92 79.54 78.11 102.4 0 107.48 117.64 143.04 168.44 34.04 46.74 51.82 64.52 72.14 70.1 0 95 .00 100.08 110.24 135.64 161.04 27.94 40.64 45.72 58.42 66.04 66.04 88.9 0 93.98 104.14 129.54 154.75 22.86 35.56 40.64 53.34 60.96 90.96 83.82 88.9 0 99.06 124.46 149.86 f 34.04 46.74 51.82 64.52 72.14 70.1 0 95 .00 100.08 110.24 135.64 161.04 g 9.5 9.5 9.5 9.5 9.5 9.4 9.5 9.5 9.5 9.5 10 cr22-20d-2.54ds cr22-30d-2.54ds cr22-34d-2.54ds cr22-44d-2.54ds cr22-50d-2.54ds cr22b-50d-2.54ds cr22-68d-2.54ds cr22-72d-2.54ds cr22-80d-2.54ds cr22-100d-2.54ds cr22d-120d-2.54ds 522-0063-9 522-0009-3 522-0011-5 522-0001-1 522-0003-7 522-0047-2 522-0017-1 522-0019-7 522-0049-8 522-0005-2 522-0053-5 note the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a19 straight through hole type unit: mm note : the 120 contacts type differs in configuration. c part number cl no. b d a number of contacts 20 30 34 36 44 50 60 62 68 72 80 100 120 34.04 46.74 51.82 54.36 52.32 64.52 72.14 70.1 0 84.84 87.38 85.34 95 .00 100.08 110.24 135.64 161.04 27.94 40.64 45.72 48.26 48.26 58.42 66.04 66.04 78.74 81.28 81.28 88.9 0 93.98 104.14 129.54 154.75 22.86 35.56 40.64 43.18 43.18 53.34 60.96 60.96 73.66 76.2 0 76.2 0 83.82 88.9 0 99.06 124.46 149.86 9.5 9.5 9.5 9.5 9.4 9.5 9.5 9.4 9.5 9.5 9.4 9.5 9.5 9.5 9.5 10 cr22a-20d-2.54ds cr22a-30d-2.54ds cr22a-34d-2.54ds cr22a-36d-2.54ds cr22c-36d-2.54ds cr22a-44d-2.54ds cr22a-50d-2.54ds cr22c-50d-2.54ds cr22a-60d-2.54ds cr22a-62d-2.54ds cr22c-62d-2.54ds cr22a-68d-2.54ds cr22a-72d-2.54ds cr22a-80d-2.54ds cr22a-100d-2.54ds cr22e-120d-2.54ds 522-0064-1 522-0010-2 522-0012-8 522-0008-0 522-0072-0 522-0002-4 522-0004-0 522-0048-5 522-0014-3 522-0016-9 522-0060-0 522-0018-4 522-0020-6 522-0050-7 522-0006-5 522-0054-8 note the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a20 right angle through hole type unit: mm part number cl no. number of contacts a b c d e f g h cr22-30d-2.54dsa cr22a-30d-2.54dsa cr22-34d-2.54dsa cr22a-34d-2.54dsa cr22-36d-2.54dsa cr22a-44d-2.54dsa cr22-50d-2.54dsa cr22b-50d-2.54dsa cr22-60d-2.54dsa cr22-62d-2.54dsa cr22a-62d-2.54dsa cr22-68d-2.54dsa cr22-72d-2.54dsa cr22-100d-2.54dsa cr22a-100d-2.54dsa 522-0023-4 522-0034-0 522-0024-7 522-0035-3 522-0025-0 522-0037-9 522-0027-5 522-0045-7 522-0028-8 522-0029-0 522-0040-3 522-0030-0 522-0031-2 522-0033-8 522-0044-4 30 34 36 44 50 60 62 68 72 100 61.74 --------- 66.82 --------- 69.36 --------- 87.14 84.71 99.84 102.38 --------- 110 .00 115.08 150.64 --------- 54.14 --------- 59.22 --------- 61.76 --------- 79.54 78.11 92.24 94.78 --------- 102.4 0 107.48 143.04 --------- 46.74 46.74 51.82 51.82 54.36 64.52 72.14 70.1 0 84.84 87.38 87.38 95.00 100.08 135.64 135.64 40.64 40.64 45.72 45.72 48.26 58.42 66.04 66.04 78.74 81.28 81.28 88.9 0 93.98 129.54 129.54 35.56 35.56 40.64 40.64 43.18 53.34 60.96 60.96 73.66 76.2 0 76.2 0 83.82 88.9 0 124.46 124.46 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.4 9.5 9.5 9.5 9.5 9.5 9.5 9.5 16.5 16.5 16.5 16.5 16.5 16.5 16.5 15.49 16.5 16.5 16.5 16.5 16.5 16.5 16.5 9 9 9 9 9 9 9 7.62 9 9 9 9 9 9 9 note : mounting hole of cr22d is design symmetry the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
a21 b pcb dimensions pcb mounting pattern part number cr13-gpin(a) 513-0010-1 polyacetal white cl no. material color note: using the polarizing key prevents mis-insertion in the printed board. to use the polarizing key, insert the polarizing key so as to hit the mold bottom. 12 a b 22.86 27.84 number of contacts 30 35.56 40.54 34 40.64 45.62 36 43.18 48.16 44 53.34 58.32 50 60.96 65.94 60 73.66 78.64 62 76.2 0 81.18 68 83.82 88.80 72 88.9 0 93.88 80 99.06 104.04 100 124.46 129.44 120 149.86 154.69 unit: mm unit: mm polarizing key note : the contact dsa type indicates 2.54mm 7 0.05. 30 to 45 8 30 to 45 8 note 1. the 120 contacts type indicates 154.69 . note 2. the 120 contacts type indicates 2.415. 0 ?.25 cr13-gpin(a) 12 a 22.86 number of contacts 30 35.56 34 40.64 36 43.18 44 53.34 50 60.96 60 73.66 62 76.2 68 83.82 72 88.9 80 99.06 100 124.46 120 149.86 : the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
|
