e-series 4-way 0 power divider 2 ? 1000 mhz MAPD-007246-ES4700 m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data sheets and product information. v1p 1 rohs compliant features ? surface mount ? wide frequency range ? 4-way?0 ? lead free ? rohs* compliant and is 260 0 c reflow compatible. ? available on tape and reel, reel quantity 2000 description m/a-com?s MAPD-007246-ES4700 is a rohs compli- ant 4 way 0 power divider in a low cost, surface mount package. ideally suited for high volume cellular and wireless applications. parts are packaged in tape & reel. ordering information part number package MAPD-007246-ES4700 300 piece reel note: reference application note m513 for reel size information. pin configuration pin no. function 1 ground 2 port 1 3 input 4 port 2 5 ground 6 port 3 7 ground 8 port 4 this preliminary data sheet contains information regarding a product m/a-com has under development. performance is based on measured results and target specifications. commitment to produce in volume is not guaranteed. * restrictions on hazardous substanc es, european union directive 2002/95/ec. sm-46 package absolute maximum ratings 1,2 parameter absolute maximum maximum power rating 1 watt internal load dissipation 0.125 watt pin temperature (10 sec) 260c operating temperature -0c to +70c operating temperature 2 -40c to +85c storage temperature -55c to +125c 1. exceeding any one or combination of these limits may cause permanent damage to this device. 2. m/a-com does not recommend sustained operation near these survivability limits. orientation dot
e-series 4-way 0 power divider 2 ? 1000 mhz MAPD-007246-ES4700 m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. ? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data sheets and product information. v1p 2 rohs compliant electrical specifications: t a = 25c, z 0 = 50 ? 1 parameter test conditions frequency units min typ max rf frequency ? 2 - 1000 mhz ? ? ? insertion loss f l ?f u 2 - 20 20 ?500 500 - 1000 db db db ? ? ? 0.5 0.7 0.8 0.8 1.1 1.5 isolation f l ?f u 2 - 20 20 ?500 500 - 1000 db db db 20 20 15 35 35 23 ? ? ? input & output return loss f l ?f u 2 - 1000 db 15.0 ? ? amplitude unbalance f l ?f u 2 - 20 20 ?500 500 - 1000 db db db ? ? ? ? ? ? 0.1 0.2 0.5 phase unbalance f l ?f u 2 - 20 20 ?500 500 - 1000 degrees degrees degrees ? ? ? ? ? ? 1 5 10
|
