usa/canada: toll free: europe : (315) 432-8909 (800) 544-2414 +44 2392-232392 model G150N50W4B overview features: ? rohs compliant ? 150 watts ? dc ? 2.7 ghz ? aln ceramic ? non-nichrome resistive element ? low vswr ? 100% tested flange mount termination 150 watts, 50 description the G150N50W4B is high performance aluminum nitride (aln) flange mount termination intended as a cost compet itive alternative to beryllium oxide (beo). the termination is well suited to all cellular frequency bands such as; amps, gsm, dcs, pcs, phs and umts. the high power handling makes the part ideal for terminating circulator s, and for use in power combiners. the termination is also rohs compliant! general specifications resistive element thick film substrate aln ceramic cover alumina ceramic mounting flange copper, nickel plated per qc-n-290 operating temperature -55 ? c to +150 ? c (see de rating chart) tolerance is 0.010?, unless otherwise specified. designed to meet of exceed applicable portions of mil-e-5400 . all dimensions in inches. electrical specifications resistance value: 50 ohms, 2% power: 150 watts frequency range: dc ? 2.7ghz return loss 25db @ 2.0ghz 20db @ 2.7ghz specification based on unit properly insta lled using suggested mounting instructions and a 50 ohm nominal impedance. specifications subject to change with out notice. outline drawing note: all dimensions in inches ? 1inch = 2.54cm. lead len th: 0.150in min. g rohs compliant
usa/canada: toll free: europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 rohs compliant model G150N50W4B typical performance: typical performance: power de-rating: mounting footprint and procedure:
|