fcxo100 fcxo corning frequency control ? worldwide data book 2001 v1.0. 2000-11-01 corning frequency control inc. ? 100 watts street ? mt. holly springs, pa 17065 ? tel 1-717-486-3411 ? fax 1-717-486-5920 ? www.corningfrequency.com tele quarz gmbh & co. kg ? landstrasse ? d-74924 neckarbischofsheim, germany ? tel +49-7268-801-0 ? fax +49-07268-801-281 ? www.telequarz.de 1 / 2 typical applications features base station surface mount package reflow process compatible low phase noise build in pll-circuit stabilit y depends on reference oscillat o r reference input parameter code i input frequency 10 10mhz 2 ppm reference frequency 13 13mhz 2 ppm note 1 26 26mhz 2 ppm 32 32.768mhz 2 ppm reference level 0.5 to 1 v pp @ 2 k w reference input impedance 3 2 k w harmonics < -30 dbc output frequency : parameter code ii output frequency operating temp range 52 52.00 mhz reference frequency 61 61.44 mhz -20....+75 note 2 rf output parameter value condition signal hcmos load 15 pf 5 % rise and fall time < 5 ns @ 15pf & 10 to 90% duty cycle 40/60 % @ vs/2 supply voltage parameter value condition supply voltage (v s ) 3.3 v 5 % current consumption steady state < 50 ma @ 25c additional parameters parameter value condition phase noise < -75 dbc/hz 10 hz < -100 dbc/hz 100 hz < -125 dbc/hz 1 khz < -140 dbc/hz 10 khz < -145 dbc/hz 100 khz note 3 parameter value condition weight < 9 g operable temperature range -30 ... +85c storage temperature range -55 ... +105c processing & packing handling&processing note lock detector output pin 6 high pll in lock low pll out of lock vcxo control pin 7 0.5v to 2.8v
fcxo100 fcxo corning frequency control ? worldwide data book 2001 v1.0. 2000-11-01 corning frequency control inc. ? 100 watts street ? mt. holly springs, pa 17065 ? tel 1-717-486-3411 ? fax 1-717-486-5920 ? www.corningfrequency.com tele quarz gmbh & co. kg ? landstrasse ? d-74924 neckarbischofsheim, germany ? tel +49-7268-801-0 ? fax +49-07268-801-281 ? www.telequarz.de 2 / 2 enclosure typ g 185b drawing 0,2 22 17,8 2,5 25,4 0,1 0,2 2,5 h 7,62 0,1 s 0,1 s 0,2 1 2 3 4 7 5 6 h = 7,0 ; g185 b fl?che auflage g185 pin connections all units in mm function description pin 1 vs power supply pin. external low frequency bypass capacitor should be connected pin 2: ref. frequency in high stabel input frequency for syncronisation, this input is ac coupled, so an external blocking capacitor is not necessary. pin 3: gnd ground connection. keep traces physically short and connect immediately to ground plane for best performance pin 4: rf-out rf syncronised output. pin 5: gnd ground connection. keep traces physically short and connect immediately to ground plane for best performance pin 6: lock detector output test output signal for pll lock detected. low signal pll out of lock high signal pll in lock only for modul test or observance pin 7: vcxo control test output of the control voltage for the vcxo (0.5v to 2.8v) only for modul test or observance ordering code code i code ii model input frequency output frequency example: fcxo100 .10 .61 order: fcxo100 notes 1 possible input frequency range 4 to 33mhz 2 possible output frequency range 4 to 90 mhz 3 @ 61.44mhz output frequency; phase noise depends on the reference oscillator unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25c)
fcxo100 fcxo corning frequency control ? worldwide data book 2001 v1.0. 2000-11-01 corning frequency control inc. ? 100 watts street ? mt. holly springs, pa 17065 ? tel 1-717-486-3411 ? fax 1-717-486-5920 ? www.corningfrequency.com tele quarz gmbh & co. kg ? landstrasse ? d-74924 neckarbischofsheim, germany ? tel +49-7268-801-0 ? fax +49-07268-801-281 ? www.telequarz.de 3 / 2 block diagramm modul test circuit
|
