n ordering information ve C 12 h m s e C k C hv C vd [example] (a) (*) (b) (c) (d) (e) (f ) (g) (h) (i) n features l ul, csa, vde, cqc recognized l 1 form a (spst-no) or 1 form c (spdt) contact l low cost, miniature relay with big performance in small package higher surge voltage type is available (6,000 v) 2,000 vac between coil and contacts l slim typemeets high density mounting requirement l wide operating range l easy circuit design with completely separated terminal arrangement (coil and contact terminals) l plastic sealed type l rohs compliant since date code: 0434r please see page 8 for more information l crepage min. 3.2 mm ve series power relay 1 pole 5 a (medium load control) 1 (a) series name ve : ve series (b) nominal voltage refer to the coil data chart (c) contact rating h : heavy duty type (d) contact arrangement nil : 1 form c (spdt) m : 1 form a (spst-no) (e) coil type nil : standard type (360 mw) s : high sensitivity type (250 mw) (f) contact material (rating) nil : gold overlay silver-nickel (n.c.: 3 a, n.o.: 5 a) e : silver-nickel (n.c.: 3 a, n.o.: 5 a) 5 : silver cadmium oxide (n.c.: 5 a, n.o.: 5 a) (g) enclosure k : plastic sealed type (h) surge strength nil : standard type (4,000 v) hv : high dielectric strength type (6,000 v) (i) standard vd: ul, csa, vde approved type note: actual marking omits the hyphen (-) of (*) rohs compliant
2 ve series n coil data chart model nominal coil must must nominal ve-( ) hm ve-( ) hme ve-( ) hm5 voltage resistance operate release power ve-( ) h ve-( ) he ve-( ) h5 (10%) voltage* voltage* ve- 5h (m) (e)-k ve- 5h (m) 5-k 5 vdc 69 ? 3.5 vdc 0.25 vdc 360 mw ve- 6h (m) (e)-k ve- 6h (m) 5-k 6 vdc 100 ? 4.2 vdc 0.3 vdc 360 mw ve- 9h (m) (e)-k ve- 9h (m) 5-k 9 vdc 225 ? 6.3 vdc 0.45 vdc 360 mw ve 12h (m) (e)-k ve-12h (m) 5-k 12 vdc 400 ? 8.4 vdc 0.6 vdc 360 mw ve-18h (m) (e)-k ve-18h (m) 5-k 18 vdc 900 ? 12.6 vdc 0.9 vdc 360 mw ve-24h (m) (e)-k ve-24h (m) 5-k 24 vdc 1,600 ? 16.8 vdc 1.2 vdc 360 mw ve-48h (m) (e)-k ve-48h (m) 5-k 48 vdc 6,400 ? 33.6 vdc 2.4 vdc 360 mw ve- 5h (m) s (e)-k ve- 5h (m) s5-k 5 vdc 100 ? 3.6 vdc 0.25 vdc 250 mw ve- 6h (m) s (e)-k ve- 6h (m) s5-k 6 vdc 145 ? 4.3 vdc 0.3 vdc 250 mw ve- 9h (m) s (e)-k ve- 9h (m) s5-k 9 vdc 325 ? 6.5 vdc 0.45 vdc 250 mw ve 12h (m) s (e)-k ve-12h (m) s5-k 12 vdc 575 ? 8.6 vdc 0.6 vdc 250 mw ve-18h (m) s (e)-k ve-18h (m) s5-k 18 vdc 1,300 ? 13.0 vdc 0.9 vdc 250 mw ve-24h (m) s (e)-k ve-24h (m) s5-k 24 vdc 2,310 ? 17.3 vdc 1.2 vdc 250 mw ve-48h (m) s (e)-k ve-48h (m) s5-k 48 vdc 9,220 ? 34.7 vdc 2.4 vdc 250 mw high sensitive type standard type note: all values in the table are measured at 20 c. *: specifed values are subject to pulse voltage.
3 ve series n specifications * 1 minimum switching loads mentioned above are reference values. please perform the confrmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. item ve-( ) hm(s)e-k ve-( ) h(s)e-k ve-( ) hm(s)5-k ve-( ) h(s)5-k ve-( ) hm(s)-k ve-( ) h(s)-k contact arrangement 1 form a (spst-no) 1 form c (spdt) 1 form a (spst-no) 1 form c (spdt) material gold overlay silver nickel, silver nickel silver-cadmium oxide alloy style single resistance (initial) (at 1 a 6 vdc) maximum 70 m? (ve-hm, h) maximum 200 m? maximum 100 m? (ve-hme, he) rating (resistive) 5 a 250 vac 5 a 250 vac (n.o.) 5 a 250 vac 3 a 250 vac (n.c.) maximum carrying current 7 a maximum switching power 1,250 va maximum switching voltage 250 vac, 150 vdc maximum switching current 5 a 5 a (n.o.) 5 a 3 a (n.c.) minimum switching load* 1 10 ma, 5 vdc (ve-hm, h), 100 ma 5 vdc (ve-hme, he, hm5, h5) coil nominal power (at 20c) standard type: 360 mw. high sensitivity type: 250 mw operate power (at 20c) standard type: 177 mw. high sensitivity type: 130 mw operating temperature standard: C40c to +85c. high sensitivity: C40c to +90c (no frost) time value operate (at nominal voltage) maximum 10 ms release (at nominal voltage) maximum 5 ms life mechanical 1 10 7 operations minimum electrical (at rating) standard type: 1 10 5 ops. min. high sensitivity type: 5 x 10 4 ops. min. other vibration misoperation 10 to 55 hz (double amplitude of 3.3 mm) resistance endurance 10 to 55 hz (double amplitude of 3.3 mm) shock misoperation 100 m/s 2 (11 1 ms) resistance endurance 500 m/s 2 (6 1 ms) weight approximately 8 g 1,250 va (n.o.) 750 va (n.c.) 1,250 va
4 ve series type compliance contact rating ul ul 508 e56140 flammability: ul 94-v0 (plastics) ve-( )-h: 5a, 250va/30vdc (n.o. resistive) 3a, 250vac (n.c. resistive) 5a, 30vdc (n.c. resistive) 1/14 hp, 250vac /125vac ve-( )-hm 5a, 250vac/30vdc (resistive) 1/12 hp, 250vac /125vac ve-( )-h5 5a, 250vac/30vdc (n.o. resistive) 1/10 hp, 250vac /125vac (n.o. resistive) 5a, 250vac/30vdc (n.c. resistive) 1/14 hp, 250vac /125vac (n.c. resistive) ve-( )-hm5 5a, 250vac/30vdc (resistive) 1/10 hp, 250vac /125vac csa c22.2 no. 14 lr 35579 vde n safety standards complies with cqc n insulation item ve - ( ) hme ve - ( ) hm ve - ( ) he ve - ( ) h ve - ( ) hm5 ve - ( ) h5 note resistance (initial) minimum 1,000 m? 1 min. at 500 vdc dielectric strength open contacts 1,000 vac 1 min. 750 vac 1 min. 1,000 vac 1 min. 750 vac 1 min. coil and contacts 2,000 vac 1 min. surge voltage (coil and contact) standard: 4,000 v, high sensitive: 6,000v 1.2 x 50s standard wave
5 ve series n reference data
6 ve series n dimensions ve-m type ve type l dimensions l schematics (bottom view) l pc board mount - ing hole layout (bottom view) unit: mm
7 ve series 1. general information l relays produced after the specifc date code that is indicated on each data sheet are lead-free now. all of our signal and power relays are lead-free. please refer to lead-free status info. (http://www.fujitsu.com/us/downloads/micro/fcai/relays/lead-free-letter.pdf) l lead free solder paste currently used in relays is sn-3.0ag-0.5cu. l all signal and power relays also comply with rohs. please refer to individual data sheets. relays that are rohs compliant do not contain the 5 hazardous materials that are restricted by rohs directive (lead, mercury, chromium iv, pbb, pbde). l it has been verifed that using lead-free relays in leaded assembly process will not cause any problems (compatible). l lf is marked on each outer and inner carton. (no marking on individual relays). l to avoid leaded relays (for lead-free sample, etc.) please consult with area sales offce. l we will ship leaded relays as long as the leaded relay inventory exists. note: cadmium was exempted from rohs on october 21, 2005. (amendment to directive 2002/95/ec) 2. recommended lead free solder profle l recommended solder paste sn-3.0ag-0.5cu. rohs compliance and lead free relay information refow solder condtion 3. moisture sensitivity l moisture sensitivity level standard is not applicable to electromechanical realys. 4. tin whisker l dipped snagcu solder is known as low risk tin whisker. no considerable length whisker was found by our in house test. we highly recommend that you confrm your actual solder conditions flow solder condtion: pre-heating: maximum 120?c soldering: dip within 5 sec. at 260?c soler bath solder by soldering iron: soldering iron temperature: maximum 360?c duration: maximum 3 sec.
8 ve series japan fujitsu component limited gotanda-chuo building 3-5, higashigotanda 2-chome, shinagawa-ku tokyo 141, japan tel: (81-3) 5449-7010 fax: (81-3) 5449-2626 email: promothq@ft.ed.fujitsu.com web: www.fcl.fujitsu.com north and south america fujitsu components america, inc. 250 e. caribbean drive sunnyvale, ca 94089 u.s.a. tel: (1-408) 745-4900 fax: (1-408) 745-4970 email: components@us.fujitsu.com web: http://www.fujitsu.com/us/services/edevices/components/ europe fujitsu components europe b.v. diamantlaan 25 2132 wv hoofddorp netherlands tel: (31-23) 5560910 fax: (31-23) 5560950 email: info@fceu.fujitsu.com web: emea.fujitsu.com/components/ asia pacifc fujitsu components asia ltd. 102e pasir panjang road #01-01 citilink warehouse complex singapore 118529 tel: (65) 6375-8560 fax: (65) 6273-3021 email: fcal@fcal.fujitsu.com web: http://www.fujitsu.com/sg/services/micro/components/ fujitsu components international headquarter offces ?2007 fujitsu components america, inc. all rights reserved. all trademarks or registered trademarks are the property of their respective owners. fujitsu components america or its affliates do not warrant that the content of datasheet is error free. in a continuing effort to improve our products fujitsu components america, inc. or its affliates reserve the right to change specifcations/datasheets without prior notice. rev. november 29, 2007
|
