hlmp-c115,fhlmp-c117,fhlmp-c123,ffhlmp-c215,f f hlmp-c223,fhlmp-c315,ffhlmp-c323,fhlmp-c415,f f hlmp-c423,ffhlmp-c515,fhlmp-c523,fhlmp-c615,ff f hlmp-c623 t-1? super ultra-bright led lamps datafsheet description these non-difused lamps are designed to produce a bright light source and smooth radiation pa t tern. a slight tint is added to the lens for easy color identifc a tion. this lamp has been designed with a 20 mil lead frame, enhanced fange, and tight meniscus controls, making it compatible with radial lead automated insertion equipment. applications ? ideal for backlighting front panels* ? used for lighting switches ? adapted for indoor and outdoor signs features ? very high intensity ? exceptional uniformity ? microtint lens for color identifcation ? consistent viewability all colors: algaas red high efciency red yellow orange green emerald green ? 15 and 25 family ? tape and reel options available ? binned for color and intensity
2 selectionfguide f f f partfnumber f luminousfintensityfivf(mcd) f color f 2 1/2[1] f standoffleads f hlmp- f min.fff max. f dh as algaas 15 no c115 290.0 C c115-o00xx 290.0 C c115-op0xx 290.0 1000.0 yes c117-op0xx 290.0 1000.0 25 no c123 90.2 C c123-l00xx 90.2 C red 15 no c215 138.0 C c215-m00xx 138.0 C c215-mn0xx 138.0 400.0 25 no c223 90.2 C c223-l00xx 90.2 C c223-mn0xx 138.0 400.0 yellow 15 no c315 147.0 C c315-l00xx 147.0 C c315-lm0xx 147.0 424.0 25 no c323 96.2 C c323-k00xx 96.2 C c323-kl0xx 96.2 294.0 orange 15 no c415 138.0 C c415-m00xx 138.0 C c415-m0d0xx 138.0 C c415-mn0xx 138.0 400.0 25 no c423 90.2 C c423-l00xx 90.2 C c423-lm0xx 90.2 276.0 green 15 no c515 170.0 C c515-l00xx 170.0 c515-lm0xx 170.0 490.0 25 no c523 69.8 C c523-j00xx 69.8 C c523-kl0xx 111.7 340.0 emerald green 15 no c615 17.0 C c615-g00xx 17.0 C 25 no c623 6.7 C c623-e00xx 6.7 C
3 hlmp - c x xx - x x x xx mechanicalfoptions 00: bulk 01: tape & reel, crimped leads 02: tape & reel, straight leads b2: right angle housing, even leads uq: ammo pack, horizontal leads colorfbinfoptions 0: full color bin distribution d: color bins 4 & 5 only maximumfivfbinfoptions 0: open (no maximum limit) others: please refer to the iv bin table minimumfivfbinfoptions please refer to the iv bin table viewingfanglef&fstandofsfoptions 15: 15 degree, without standofs 17: 15 degree, with standofs 23: 25 degree, without standofs colorfoptions 1. as algaas red 2. high efciency red 3. yellow 4. orange 5. green 6. emerald green packagefoptions c: t-1 3/4 (5 mm) partfnumberingfsystem
4 absolutefmaximumfratingsfatft a f=f25c f f highf f high f f dhfasf efciency f f performance f f algaas f redfand f f greenfand f parameter f red f orange f yellow f emeraldfgreen f units dc forward current 1 30 30 20 30 ma transient forward current 2 500 500 500 500 ma (10 sec pulse) reverse voltage (ir = 100 a) 5 5 5 5 v led junction temperature 110 110 110 110 c operating temperature range C20 to +100 C40 to +100 C40 to +100 C20 to +100 c storage temperature range C40 to +100 C40 to +100 C40 to +100 C40 to +100 c notes: 1. see figure 5 for maximum current derating vs. ambient temperature. 2. the transient current is the maximum nonrecurring peak current the device can withstand without damaging the led die and wire bond. packagefdimensions hlmp-cx15fandfhlmp-cx23 hlmp-cx17 1.14 0.20 (0.045 0.008) 5.80 0.20 (0.228 0.008) 5.00 0.20 (0.197 0.008) 31.60 (1.244) min. 0.70 (0.028) max. 1.00 (0.039) min. 8.71 0.20 (0.343 0.008) 2.54 0.38 (0.100 0.015) 0.50 0.10 (0.020 0.004) sq. typ. notes: 1. all dimensions are in millimeters (inches). 2. leads are mild steel, solder dipped. 3. an epoxy meniscus may extend about 0.5 mm (0.020 in.) down the leads. cathode lead 1.85 (0.073) max. cathode flat (note 1) 1.14 0.20 (0.045 0.008) 5.80 0.20 (0.228 0.008) 5.00 0.20 (0.197 0.008) 31.60 (1.244) min. 0.70 (0.028) max. 1.00 (0.039) min. 8.71 0.20 (0.343 0.008) 2.54 0.38 (0.100 0.015) 0.50 0.10 (0.020 0.004) sq. typ. cathode lead cathode flat 1.50 0.15 (0.059 0.006) 12.60 0.18 (0.496 0.007) notes: 1.fallfdimensionsfarefinfmillimetersf(inches). 2.fanfepoxyfmeniscusfmayfextendfaboutf0.5fmmf(0.020fin.)fdownfthefleads.
5 electricalfcharacteristicsfatft a f=f25c f forward f f reverse f capacitance f f speedfoffresponse f f voltage f f breakdown f cf(pf)f thermal f s f(ns) f f vff(volts) f f vrf(volts) f vff=f0f resistance f timefconstant f f @fiff=f20fmaf @firf=f100f af ff=f1fmhzf r j-pin f e -t/ s f partfnumber f typ. f max. f min.f typ. f (c/w) f typ. hlmp-c115 1.8 2.2 5 30 210 30 hlmp-c117 hlmp-c123 hlmp-c215 1.9 2.6 5 11 210 90 hlmp-c223 hlmp-c315 2.1 2.6 5 15 210 90 hlmp-c323 hlmp-c415 1.9 2.6 5 4 210 280 hlmp-c423 hlmp-c515 2.2 3.0 5 18 210 260 hlmp-c523 hlmp-c615 2.2 3.0 5 18 210 260 hlmp-c623 opticalfcharacteristicsfatft a f=f25c f luminous f f f color, f viewing f f intensity f f peak f dominantf anglef luminous f f ivf(mcd) f f wavelength f wavelength f 2 ? f efcacy f f @f20fma [1] f f peak f(nm)f d [2] f(nm)f (degrees) [3] f v f partfnumber f min.f typ. f typ. f typ. f typ. f (lm/w) hlmp-c115 290 600 645 637 11 80 hlmp-c117 hlmp-c123 90 200 26 hlmp-c215 138 300 635 626 17 145 90 170 23 hlmp-c315 146 300 583 585 17 500 96 170 25 hlmp-c415 138 300 600 602 17 380 90 170 23 hlmp-c515 170 300 568 570 20 595 69 170 28 hlmp-c615 17 45 558 560 20 656 6 27 28 notes: 1. the luminous intensity, iv, is measured at the mechanical axis of the lamp package. the actual peak of the spatial radiation pattern may not be aligned with this axis. 2. the dominant wavelength, d , is derived from the cie chromaticity diagram and represents the color of the device. 3. 2 ? is the of-axis angle where the luminous intensity is ? the on-axis intensity.
6 orange wavelength ? nm relative intensity 1.0 0.5 0 500 550 600 650 700 750 yellow emerald green high performance green t a = 25 c ts algaas red dh as algaas red high efficiency red i f ? forward current ? ma 1.0 3.5 300.0 5.0 0.1 v f ? forward voltage ? v 1.5 2.0 2.5 3.0 10.0 2.0 1.0 0.2 0.5 0 0.5 20.0 50.0 100.0 200.0 dh as algaas red ts algaas red 0 100 80 60 40 20 i f ? forward current ? ma 2.0 4.0 3.0 1.0 v f ? forward voltage ? v 0 5.0 yellow high efficiency red, orange, yellow, and high performance green, emerald green high efficiency red/orange high performance green, emerald green relative luminous intensity (normalized at 20 ma) 0.1 0.01 i f ? dc forward current ? ma 1 5 5.0 0.2 0.05 0.2 2 50 1.0 10 0.02 0.1 0.5 2.0 0.5 20 30 dh as algaas red ts algaas red relative luminous intensity (normalized at 20 ma) 0 0 i dc ? dc current per led ? ma 10 20 1.6 0.8 0.4 5 15 30 1.2 25 0.2 0.6 1.0 1.4 her, orange, yellow, and high performance green, emerald green figuref1.frelativefintensityfvs.fwavelength. figuref2.fforwardfcurrentfvs.fforwardfvoltagef(non-resistorflamp). figuref3.frelativefluminousfintensityfvs.fforwardfcurrent.
7 relative efficiency (normalized at 20 ma) 0 i peak ? peak forward current ? ma 0 0.6 0.8 300 20 100 1.2 1.0 0.2 0.4 50 200 10 dh as algaas red peak ? relative efficiency (normalized at 20 ma) 0 i peak ? peak forward current ? ma 0.4 0.6 0.8 1.0 90 20 70 50 40 1.3 1.1 high performance green yellow high efficiency red/orange her, orange, yellow, high performance green, emerald green 0.5 0.7 0.9 1.2 30 60 80 10 emerald green i f ? forward current ? ma i f ? forward current ? ma 0 0 t a ? ambient temperature ? c t a ? ambient temperature ? c 40 80 40 20 10 20 60 30 100 5 15 25 35 dh as algaas red r ja = 559c/w r ja = 689c/w normalized luminous intensity 1.0 0.0 angular displacement ? degrees 0.8 0.6 0.5 0.7 0.2 45 0.1 0.3 0.4 35 25 5 15 -5 -15 -25 -35 -45 0.9 normalized luminous intensity 1.0 0.0 angular displacement ? degrees 0.8 0.6 0.5 0.7 0.2 45 0.1 0.3 0.4 35 25 5 15 -5 -15 -25 -35 -45 0.9 0 0 40 80 40 20 10 20 60 30 100 5 15 25 35 her, orange, yellow, and high performance green, emerald green r ja = 470c/w r ja = 705c/w r ja = 300c/w yellow her, orange, green, emerald green figuref5.fmaximumfforwardfdcfcurrentfvs.fambientftemperature.fderatingfbasedfonft j maxf=f110c. figuref4.frelativefefciencyf(luminousfintensityfperfunitfcurrent)fvs.fpeakfcurrent. figuref6.frelativefluminousfintensityfvs.fangularfdisplacement.f f 15fdegreeffamily. figuref7.frelativefluminousfintensityfvs.fangularfdisplacement.f f 25fdegreeffamily.
8 intensityfbinflimitsf f f intensityfrangef(mcd) f color f binf min.ffffffffffff max. l 101.5 162.4 m 162.4 234.6 n 234.6 340.0 o 340.0 540.0 p 540.0 850.0 q 850.0 1200.0 r 1200.0 1700.0 red/orange s 1700.0 2400.0 t 2400.0 3400.0 u 3400.0 4900.0 v 4900.0 7100.0 w 7100.0 10200.0 x 10200.0 14800.0 y 14800.0 21400.0 z 21400.0 30900.0 l 173.2 250.0 m 250.0 360.0 n 360.0 510.0 o 510.0 800.0 p 800.0 1250.0 yellow q 1250.0 1800.0 r 1800.0 2900.0 s 2900.0 4700.0 t 4700.0 7200.0 u 7200.0 11700.0 v 11700.0 18000.0 w 18000.0 27000.0 e 7.6 12.0 f 12.0 19.1 g 19.1 30.7 h 30.7 49.1 i 49.1 78.5 j 78.5 125.7 k 125.7 201.1 l 201.1 289.0 green/ m 289.0 417.0 emerald green n 417.0 680.0 o 680.0 1100.0 p 1100.0 1800.0 q 1800.0 2700.0 r 2700.0 4300.0 s 4300.0 6800.0 t 6800.0 10800.0 u 10800.0 16000.0 v 16000.0 25000.0 w 25000.0 40000.0 maximum tolerance for each bin limit is 18%. colorfcategoriesf f f lambdaf(nm) f color f category# f min.ffffffffffff max. 6 561.5 564.5 5 564.5 567.5 green 4 567.5 570.5 3 570.5 573.5 2 573.5 576.5 1 582.0 584.5 3 584.5 587.0 yellow 2 587.0 589.5 4 589.5 592.0 5 592.0 593.0 1 597.0 599.5 2 599.5 602.0 3 602.0 604.5 orange 4 604.5 607.5 5 607.5 610.5 6 610.5 613.5 7 613.5 616.5 8 616.5 619.5 tolerance for each bin limit is 0.5 nm.
9 mechanicalfoptionfmatrix mechanicalfoptionfcode f defnition 00 bulk packaging, minimum increment 500 pcs/bag 01 tape & reel, crimped leads, minimum increment 1300 pcs/bag 02 tape & reel, straight leads, minimum increment 1300 pcs/bag b2 right angle housing, even leads, minimum increment 500 pcs/bag uq ammo pack, horizontal leads, in 1k minimum increment note: all categories are established for classifcation of products. products may not be available in all categories. please contact your local avago representative for further clarifcation/information.
for product information and a complete list of distributors, please go to our web site: www.avagotech.com avago, avago technologies, and the a logo are trademarks of avago technologies in the united states and other countries. data subject to change. copyright ? 2005-2008 avago technologies. all rights reserved. obsoletes 5989-4251en av02-1561en - october 13, 2008 figuref8.frecommendedfwavefsolderingfprofle. laminarf wa ve bo tt omfside offpcfbo ard hotfairfknife turbulentf wa ve fl uxing prehea t 0 1 0 2 0 30 50 100 150 200 250 30 40 50 timefCfsec onds tempera turefCfc 60 7 0 8 0 9 0 1 00 t opfsidefo f pcfbo ard c onve yorfspeedf=f1.83fm/minf(6fft/min) prehea tfse tt ingf=f150cf(100cfpcb) solderf wa vef tempera turef=f245c airfknifefairf tempera turef=f390c airfknifefdist ancef=f1.91fmmf(0.25fin.) airfknifefanglef=f40 solder:fsn63;ffl ux:frma note:fall owfforfbo ardsf to fbef sufficient ly fc ooledfbeforefexertin g mechanic alfforce . precautions: lead forming ? the leads of an led lamp may be preformed or cut to length prior to insertion and soldering into pc board. ? if lead forming is required before soldering, care must be taken to avoid any excessive mechanical stress induced to led package. otherwise, cut the leads of led to length after soldering process at room temperature. the solder joint formed will absorb the mechanical stress of the lead cutting from traveling to the led chip die attach and wirebond. ? it is recommended that tooling made to precisely form and cut the leads to length rather than rely upon hand operation. solderingfconditions ? care must be taken during pcb assembly and soldering process to prevent damage to led component. ? the closest led is allowed to solder on board is 1.59 mm below the body (encapsulant epoxy) for those parts without standof. ? recommended soldering conditions: f f f manualfsolderf f f f wavefsoldering f dipping pre-heat temperature 105c max. C pre-heat time 30 sec max. C peak temperature 250c max. 260c max. dwell time 3 sec max. 5 sec max. ? wave soldering parameter must be set and maintained according to recommended temperature and dwell time in the solder wave. customer is advised to periodically check on the soldering profle to ensure the soldering profle used is always conforming to recommended soldering condition. ? if necessary, use fxture to hold the led component in proper orientation with respect to the pcb during soldering process. ? proper handling is imperative to avoid excessive ther - mal stresses to led components when heated. there - fore, the soldered pcb must be allowed to cool to room temperature, 25c, before handling. ? special attention must be given to board fabrication, solder masking, surface plating and lead holes size and component orientation to assure solderability. ? recommended pc board plated through hole sizes for led component leads: f ledfcomponentf f f platedfthroughf f f f leadfsize f diagonal f holefdiameter 0.457 x 0.457 mm 0.646 mm 0.976 to 1.078 mm (0.018 x 0.018 inch) (0.025 inch) (0.038 to 0.042 inch) 0.508 x 0.508 mm 0.718 mm 1.049 to 1.150 mm (0.020 x 0.020 inch) (0.028 inch) (0.041 to 0.045 inch) note: refer to application note an1027 for more information on soldering led components.
|
