a sub-miniature, push-on, blindmate, high performance microwave and rf interconnect system. developed in response to industry demand for increased package density. ? center-to-center spacing of 0.170" available for increased package density. ? the gpo? blindmate interconnect, part no. a1a1-0001-01 weighs just 0.17 grams. ? rf performance from dc to 40 ghz ? designed to accommodate both radial and axial misalignment with negligible vswr change. ? a full range of adapter support. ? snap together mate for reduced assembly and test time. ? complies with smp interface of mil-std-348 in accordance with mil-prf-39012, desc 94007/94008 gpo? interconnect series product information microwave products gpo is a registered trademark of corning gilbert inc., glendale, az 85301 u.s.a. ?2007 corning gilbert inc. g-1500-103 01/07
gpo product characteristics 1 ? impedance: 50 ohms ? frequency: dc to 26.5 ghz extended performance available to 40 ghz ? vswr: 1.15:1 to 26.5 ghz typical; <1.5:1 typical to 40 ghz ? insulation resistance: 5,000 megaohms min. ? center conductor contact resistance: 6.0 milliohms max. ? dwv @ sea level: 500 vrms ? corona level @ 70,000': 190 vrms ? rf high pot. @ 5 mhz: 325 vrms ? force to engage: * 9.0 lbs. typical full detent, 7.0 lbs. typical limited detent, 2.0 lbs. typical smooth bore ? force to disengage: * 7.0 lbs. typical full detent, 5.0 lbs. typical limited detent, 0.5 lbs. typical smooth bore ? center contact retention: 1.5 lbs. min. (captivated designs) ? misalignment, radial: 0.010" ? misalignment, axial: 0.010" (flush to -0.010" from the reference plane) ? temperature range: -65 c to +165 c ? environmental testing: meets mil-prf-39012 for corrosion, vibration, mechanical shock, thermal shock and moisture resistance (paragraphs 3.13, 3.18, 3.19, 3.20, 3.21) product examples gpo is a registered trademark of corning gilbert inc., glendale, az 85301 u.s.a. ?2007 corning gilbert inc. g-1500-103 01/07 corning gilbert inc. microwave products 5310 w. camelback rd. glendale, az 85301 u.s.a. phone: 800 651 8869 (u.s. and canada) (01) 623 845 5613 (international) fax: (01) 623 934 5160 website: www.corning.com/corninggilbert e-mail: pushon-info@corning.com notes: 1. performance listed is typical. individual part configuration may vary. contact our customer care team for more information and specifications by part number. * engage/disengage forces are not typical when mated with astm-f15 shrouds. a007-l43-01-tab-r A014-B11-01 a001-a23-07 a015-b11-01
|
