89 5305 spectrum drive, frederick, md 21703-7362 tel: 301-846-9222, 800-638-2048 fax: 301-846-9116 web: www.aeroflex-weinschel.com email: weinschel-sales@aeroflex.com revision date: 11/28/07 programmable attenuators model no. attenuation cell number cells range/steps increments (db) (db) 3200-1 8 127/1 1, 2, 4, 8, 16, 32, 64* 3200-1e 3200-2 8 63.75/0.25 0.25, 0.5, 1, 2, 4, 8, 3200-2e 16, 32 3201-1 5 31/1 1, 2, 4, 8, 16 3201-1e 3201-2 5 120/10 10, 20, 30, 60** 3205-1 4 70/10 10, 20, 20, 20 3205-2 4 55/5 5, 10, 20, 20 3205-3 4 1.5/0.1 0.1, 0.2, 0.4, 0.8 3205-3e 3206-1 6 63/1 1, 2, 4, 8, 16, 32 3206-1e 3209-1 10 64.5/0.1 0.1, 0.2, 0.4, 0.8, 1, 3209-1e 2, 4, 8, 16, 32 *64 db cell comprised of two 32 db cells *60 db cell comprised of two 30 db cells cell configurations: description the 3200 series programmable step attenuators are designed for use in automatic test equipment and oem systems operating in the dc to 3 ghz frequency range. this series is available in many standard attenuation ranges and cell configurations. custom designed configurations are available upon request. each cell contains a double-pole, double-throw relay that provides a zero path or attenu- ated path for the rf signal. microstrip circuitry and special compensation techniques produce flat attenuation versus frequency characteristics. the microstrip construction, using thick-film circuit ele- ments, ensures product uniformity. to minimize rf leakage, the 3200 series attenuators are provided with gold-plated contact areas and feedthrough filters at each control terminal. model 3200 series dc to 2.0 ghz model 3200 (e series) dc t0 3.0 ghz programmable attenuators 1 watt with optional ttl interface features o widest selection of attenuation ranges & step sizes o available express models: 3200-1, 3200-1e-2 3200-2 3201-1, 3201-2 3206-1 other models may be available for express delivery . o high quality construction & connectors o special configurations available upon request - custom cell/step size configurations - 3.0 ghz and higher frequencies specifications nominal impedance: 50 frequency range: dc to 2.0 ghz: 3200-1, 3200-2, 3201-1, 3201-2, 3205-1, 3205-2, 3205-3, 3206-1, 3209-1 dc to 3.0 ghz: 3200-1e, 3200-2e, 3201-1e, 3205-3e, 3206-1e, 3209-1e maximum swr: freq 3200-1 3200-1e 3201-x 3206-1e 3209-1 3209-1e range 3200-2 3200-2e 3205-x (ghz) 3201-1e 3206-x 3205-3e dc - 0.2 1.30 1.25 1.30 1.25 1.35 1.35 0.2 - 1 1.25 1.25 1.25 1.25 1.35 1.35 1 - 2 1.35 1.25 1.35 1.25 1.35 1.35 2 - 3 - - - 1.40 - - - 1.35 - - - 1.45 incremental attenuation accuracy: frequency accuracy range (ghz) dc - 0.5 + 0.2 db or 0.5% 0.5 - 1 + 0.2 db or 1.0% 1 -3 + 0.3 db or 2.0% monotonicity: dc to 3.0 ghz incremental temperature coefficient: 30 and 32 db cells: 0.00005 db/db/c all other cells: 0.00002 db/db/c power rating: 1 watt average to 25c ambient temperature, derated linearly to 0.25 watt @ 71c. 50 watts peak (5 sec pulse width; 1% duty cycle) www.argosysales.com 800-542-4457 express
5305 spectrum drive, frederick, md 21703-7362 tel: 301-846-9222, 800-638-2048 fax: 301-846-9116 web: www.aeroflex-weinschel.com email: weinschel-sales@aeroflex.com revision date: 11/28/07 programmable attenuators model number description: example, dc-2 ghz models: 320x-y for a basic 2 ghz model* 320x-y-1 add -1 for ttl driver board with a 10 pin ribbon cable connector. 320x-y-2 add -2 for ttl driver board with a 15 pin d type connector. example, dc-3 ghz models: add e as in: 320x-ye for a basic 3 ghz model* 320x-ye-1 add -1 for a ttl driver board with a 10 pin ribbon cable connector 320x-ye-2 add -2 for a ttl driver board with a 15 pin d connector * use the cell configuration table to determine x and y for available attenuation ranges. 90 specifications - cont power coefficient: <0.005 db/db/watt rated switch life: 5 million cycles operations per cell @ 0 dbm switching time: 6 msec. maximum at nominal rated voltage release time: 3 msec maximum cycling rate: 5 hz maximum per relay operating voltage : +12v (+ 16v maximum; +10v minimum) operating current: 2 ghz models: 14 ma typical per cell @ +12v 3 ghz models: 30 ma typical per cell @ +12v temperature range (operating): -55c to +71c test data: test data is available at additional cost. connectors: sma female connectors per mil-std-348 interface dimensions - mate nondestructively with mil-c-39012 connectors. control terminals: 0.040 inch. (1 mm) diameter solderable leads. may be used with pc board sockets/ receptacles. construction: housing: aluminum connectors: stainless steel body and beryllium copper contacts. control terminals: brass/copper, silver plated weight (typical): 3200-1, 3200-2, 3200-1e & 3200-2e: 117 g (4.1 oz) 3201-1 & 3201-1e: 89 g (3.1 oz) 3201-2: 96 g (3.4 oz) 3205-1, 3205-2, 3205-3, 3205-3e: 77 g (2.7 oz) 3206-1, 3206-1e: 99 g (3.5 oz) 3209-1, 3209-1e: 159 g (5.6 oz) control configuration: standard unit: one terminal is connected to case ground and the remaining terminals are provided for activation of individual cells. attenuation is fail-safe to "0" setting in the absence of a control voltage. application of a voltage (+) to a particular cell causes it to switch to the attenuate position. units with ttl option: units with this option are supplied with a very low profile connectorized ttl interface board mounted directly to the control terminals. this ttl interface option is available with either a 10 pin ribbon cable connec- tor or a 15 pin "d" connector ( limited models ) , refer to list below. each type is supplied with a mating connector. refer to physical dimensions for mating connector pin/wiring details. two wires are specified for supply voltage and ground. the remaining wires will accept ttl control signals to activate or de-activate a particular attenuation cell. a ttl high will energize a cell to the high attenuation state, whereas a ttl low will maintain a cell in its zero attenuation state. to order 3200 series attenuators with this option add -1 to basic model number for ribbon cable connector and -2 for the "d" connector. example: model 3201-1 with a ttl inter- face board would be 3201-1-1. mating connector is provided. to order a ttl driver board separately for an existing 3200 series attenuator, use the following: basic ttl bd kit part no. ttl bd part no. model no. 10 pin ribbon 15 pin "d" conn 3200-1, 3200-1e 101-1781 101-1798-000** 3200-2, 3200-2e 101-1781 101-1798-000** 3201-1, 3201-2e 101-1780 101-1798-001** 3201-2 101-1780 101-1798-001** 3205-1 101-1780 101-1798-001** 3205-2 101-1780 101-1798-001** 3205-3, 3205-3e 101-1780 101-1798-001** 3206-1, 3206-3e 101-1780 n/a 3209-1, 3209-1e 101-1804-000* n/a * 14 pin ribbon connector. ** 3 ft ttl interface cable part no. 101-1805 supplied with unit. note: control is non-latching and requires a continuous control signal for the period of time in which attenuation is required. maximum insertion loss (db): frequency 3200-1 3200-1e 3201-1 3205-x 3201-1e 3205-3e 3206-1 3206-1e 3209-1 3209-1e range (ghz) 3200-2 3200-2e 3201-2 dc - 0.5 2.80 2.20 1.80 1.80 1.50 1.25 2.00 1.50 3.50 3.00 0.5 - 1.0 3.50 3.00 2.40 2.30 1.80 1.75 2.70 2.00 4.50 3.50 1.0 - 1.5 4.25 3.20 3.00 2.80 2.25 2.25 3.30 2.50 5.60 4.00 1.5 - 2.0 4.75 3.70 3.75 3.30 2.50 2.50 4.00 2.80 6.70 4.50 2.0-3.0 - - - 4.90 - - - - - - 3.40 3.40 - - - 3.70 - - - 5.50
91 5305 spectrum drive, frederick, md 21703-7362 tel: 301-846-9222, 800-638-2048 fax: 301-846-9116 web: www.aeroflex-weinschel.com email: weinschel-sales@aeroflex.com revision date: 11/28/07 programmable attenuators interface connector: option -1(models 3200, 3201, 3205 and 3206): 10 pin .025 square post header on .1 center, mates with amp connector 746285-1 or equivalent. option -1 (3209): 14 pin .025 square post header on .1 center, mates with amp connector 746285-2 or equivalent. option -2: 15 pin d socket connector, mates with cannon connector da-15s or equivalent. input voltage: v in high= +2.0v minimum +5.0v typical vcc maximum v in low = 0 minimum 0.8 maximum input current: i in (v in =2.4 v) = 55 a i in (v in =3.85 v) = 280 a supply current (digital section): i cc =25.0 ma maximum supply current (per cell continuos): i cc =25.0 ma maximum for 2 ghz models and 30 ma per cell for 3 ghz models. supply voltage: v cc =+12.0 to +15v temperature range (operating): -40c to +70c models with built-in drivers: most 3200s are avail- able with an intelligent interface\driver cards. these are designed to interface with our 8210a series controllers which greatly simplifies computer control applications. refer to model 3200t and 3201t data sheet for more information. physical dimensions: ttl driver specifications: aeroflex / wein note: all dimensions are given in mm (inches) and are maximum, unless otherwise specified. model no. no. cells a b c d 3200-x 8 101.6 (4.0 7 eq spcs @ 10.16 (.40) = 71.1 (2.80) 88.9 (3.50) 95.2 (3.75) 3201-x 5/4 76.2 (3.00) 4 eq spcs @ 10.16 (.40) = 40.64 (1.60) 63.5 (2.50) 69.8 (2.75) 3205-x 4 58.9 (2.32) 3 eq spcs @ 10.16 (.40) = 30.5 (1.20) 46.2 (1.82) 52.6 (2.07) 3206-x 6 81. 3+ 0.5 5 eq spcs @ 10.16 (.40) = 50.8 (2.00) 68.6 (2.70) 75.18 (2.96) (3.20+ 0.02
5305 spectrum drive, frederick, md 21703-7362 tel: 301-846-9222, 800-638-2048 fax: 301-846-9116 web: www.aeroflex-weinschel.com email: weinschel-sales@aeroflex.com 92 revision date: 11/28/07 programmable attenuators ttl conn 3200-1-1 3200-2-1 3201-1-1 3201-2-1 3205-1-1 3205-2-1 3205-3-1 3206-1-1 pin no. (j3) db (cell) db (cell) db (cell ) db (cell) db (cell) db (cell) db (cell ) db (cell) 1 32 0.25 nc nc nc nc nc nc 2 1 0.5 nc nc nc nc nc nc 3 2 1 1 30 nc nc nc 1 4 32* 2 2 10 10 5 0.1 2 5 4 4 4 30** 20 10 0.2 4 6 8 8 8 20 20 20 0.4 8 7 16 16 16 30** 20 20 0.8 16 8 32* 32 nc nc nc nc nc 32 9 com com com com com com com com 10 +vcc +vcc +vcc +vcc + vcc + vcc +vcc + vcc physical dimensions: *64 db cell comprised of two 32 db cells **60 db cell comprised of two 30 db cells nc = not connected control connector j3 pin locations: model no. e 3200-x-1 37.8 (1.49) 3201-x-1 18.8 (0.74) 3206-x-1 18.8 (0.74) ttl option -1 (3205): ttl option -1 (3200, 3201, 3206): note: all dimensions are given in mm (inches) and are maximum, unless otherwise specified. aeroflex / weinschel
93 5305 spectrum drive, frederick, md 21703-7362 tel: 301-846-9222, 800-638-2048 fax: 301-846-9116 web: www.aeroflex-weinschel.com email: weinschel-sales@aeroflex.com revision date: 11/28/07 programmable attenuators note: all dimensions are given in mm (inches) and are maximum, unless otherwise specified. ttl driver option -2 (3200, 3201, 3205): model no. a 3200-x-2 101.6 (4.00) 3201-x-2 76.2 (3.00) 3205-x-2 76.2 (3.00) "d" conn 3200-1-2 3200-2-2 3201-1-2 3201-2-2 3205-1-2 3205-2-2 3205-3-2 cable (p/n 101-1805) pin no. (j3) db (cell) db (cell) db (cell ) db (cell) db (cell) db (cell) db (cell) color code 1 32 32 nc nc nc nc nc brn 2 16 16 nc nc nc nc nc yel 3 8 8 nc nc nc nc nc grn 4 4 4 16 30** 20 20 0.8 lt blu 5 32 0.25 1 30** nc nc nc vio 6 1 0.5 2 10 10 5 0.1 gry 7 2 1 4 30 20 10 0.2 wht 8 32* 2 8 20 20 20 0.4 wht/blk 9 nc nc nc nc nc nc nc red 10 gnd gnd gnd gnd gnd gnd gnd blk 11 nc nc nc nc nc nc nc - - - 12 nc nc nc nc nc nc nc - - - 13 nc nc nc nc nc nc nc - - - 14 nc nc nc nc nc nc nc - - - 15 +vcc +vcc +vcc +vcc +vcc +vcc +vcc orn *64 db cell comprised of two 32 db cells **60 db cell comprised of two 30 db cells nc = not connected control connector j3 pin locations: physical dimensions:
5305 spectrum drive, frederick, md 21703-7362 tel: 301-846-9222, 800-638-2048 fax: 301-846-9116 web: www.aeroflex-weinschel.com email: weinschel-sales@aeroflex.com 94 revision date: 11/28/07 programmable attenuators physical dimensions: note: all dimensions are given in mm (inches) and are maximum, unless otherwise specified. model 3209-1: model 3209-1-1 (ttl option -1):
|
