b2 ribbon cable connector hif4 series features 1. current capacity the hif4 series connector is capable of 3 a current capacity used for wider applications, while the hif3 series uses 1 a capacity. 2. full lock mechanism this connector is equipped with a hirose original locking mechanism, and guarantees excellent reliability for vibration and shock. 3. one-touch insertion and extraction mechanism this connector is equipped with levers for automatic insertion and extraction, as soon as lock is reset. insertion and extraction tools are not required. 4. applicable cable the applicable cable is ul2651 awg#24 flat cable (7 cores./0.203mm, jacket dia :1.0 to 1.2mm). product specifications note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. note 3: information contained in this catalog represents general requirements for this series.contact us for the drawings and s pecifications for a specific part number shown. note 4: please note that there is a risk of deforming the lock when an excessive load is applied to the inside. applications computers, terminal equipment, various kinds of electronic equipment, and office automation machines rating current rating : 3a operating temperature range : C 55 to + 85 ? ( note 1 ) storage temperature range : C 10 to + 60 ? ( note 2 ) voltage rating : 300v ac operating moisture range : 40 to 80 % storage humidity range : 40 to 70% ( note 2 ) material item specification condition 1. insulation resistance 1000m ohms min 500v dc 2. withstanding voltage no flashover or insulation breakdown. 1000v ac/1 minute 3. contact resistance 15m ohms max 0.1a 4. vibration no electrical discontinuity of 1s or more frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. humidity (steady state) insulation resistance: 1000m ohms min. 96 hours at temperature of 40? and humidity of 90% to 95% 6. temperature cycle no damage, cracks, or parts looseness. (-65 ? : 30 minutes ? 15 to 35 ? : 5 minutes max. 125 ? : 30 minutes ? 15 to 35 ? : 5 minutes max.) 5 cycles 7. operating life contact resistance: 15m ohms max. 500 cycles 8. resistance to soldering heat no deformation of components affecting performance. solder bath: 260? for 10 seconds manual soldering: 360? for 5 seconds part material finish remarks insulator pbt black ul94v-0 contact socket beryllium copper gold plated over nickel underplating pin header phosphor bronze gold plated over nickel underplating the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b3 hif4 series ribbon cable connector hif4 - * * d - 3.18 r qe wr t ordering information pin header q series name : hif4 w number of contacts : 16, 20, 26, 34, 40 e contact alignment : d : double r contact pitch : 3.18mm t connection type : ribbon cable socket hif4 - * * p - 3.18 ds qe wr t q series name : hif4 w number of contacts : 16, 20, 26, 34, 40 e contact alignment : p : pin header r contact pitch : 3.18mm t contact type ds : right angle type sa : straight dip type w : wrapping type the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b4 hif4 series ribbon cable connector socket unit:mm unit:mm pin header right angle type cl no. part number 563-0025-5 563-0010-8 563-0011-0 563-0012-3 563-0029-6 hif4-16d-3.18r hif4-20d-3.18r hif4-26d-3.18r hif4-34d-3.18r hif4-40d-3.18r number of contacts 16 20 26 34 40 a b 31.98 38.34 47.88 60.6 0 70.14 22.26 28.62 38.16 50.88 60.42 c 26.28 32.64 42.18 54.9 0 64.44 cl no. part number 563-0026-8 563-0001-7 563-0002-0 563-0003-2 563-0030-5 hif4-16p-3.18ds hif4-20p-3.18ds hif4-26p-3.18ds hif4-34p-3.18ds hif4-40p-3.18ds number of contacts 16 20 26 34 40 a b 46.68 53.04 62.58 75.3 0 84.84 32.18 38.54 48.08 60.8 0 70.34 c d e f rohs 42.82 63.28 49.18 69.64 58.72 79.18 71.44 91.90 80.89 101.44 39.98 46.34 55.88 68.6 0 78.14 33.58 39.94 49.48 62.2 0 71.74 yes rohs yes 22.26 28.62 38.16 50.88 60.42 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b5 hif4 series ribbon cable connector pin header straight through hole type unit:mm pin header wrapping type cl no. part number 563-0028-3 563-0007-3 563-0008-6 563-0009-9 563-0032-0 hif4-16p-3.18w hif4-20p-3.18w hif4-26p-3.18w hif4-34p-3.18w hif4-40p-3.18w number of contacts 16 20 26 34 40 a b 46.68 53.04 62.58 75.3 0 84.84 32.18 38.54 48.04 60.8 0 70.34 c d e f rohs 42.82 63.28 49.18 69.64 58.72 79.18 71.44 91.90 80.98 101.44 39.98 46.34 55.88 68.6 0 78.14 33.58 39.94 49.48 62.2 0 71.74 yes rohs yes 22.26 28.62 38.16 50.88 60.42 unit:mm cl no. part number 563-0027-0 563-0004-5 563-0005-8 563-0006-0 563-0031-8 hif4-16p-3.18dsa hif4-20p-3.18dsa hif4-26p-3.18dsa hif4-34p-3.18dsa hif4-40p-3.18dsa number of contacts 16 20 26 34 40 a b 46.68 53.04 62.58 75.3 0 84.84 32.18 38.54 48.08 60.8 0 70.34 c d e f 42.82 63.28 49.18 69.64 58.72 79.18 71.44 91.90 80.98 101.44 39.98 46.34 55.88 68.6 0 78.14 33.58 39.94 49.48 62.2 0 71.74 22.26 28.62 38.16 50.88 60.42 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b6 hif4 series ribbon cable connector b pcb mounting pattern number of contacts a 16 20 26 34 40 22.26 28.62 38.16 50.88 60.42 b 33.58 39.94 49.48 62.20 71.74 pin header right angle type type shape number of contacts a 16 20 26 34 40 22.26 28.62 38.16 50.88 60.42 b 39.98 46.34 55.88 68.60 78.14 pin header straight through hole type or pin header wrapping type dsa type w type ds type the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b7 hif4 series ribbon cable connector b hif4 basic connection method fig.1 type ao type bo type co type do type ad a side d side * k mark and k mark k mark and mark type cd c side d side * k mark and k mark k mark and mark type ab type a side type b side * k mark and k mark k mark and mark as shown below in figure 1, contact positions are indicated by marks ( k ). the connected contact is indicated with a symbol next to the individual type name. however, the contact symbol connected to the cable mark is indicated at the mark * . m m m the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b8 hif4 series ribbon cable connector note 1: cable length tolerance 500 +10, 0 max. (mm) 500 +3%, 0% min. note 2.when a twist cable or a slit (like a roller screen) cable is used, the cable pitch will change according to cable manufacturers. if connection failure has occurred, consult hrs sales department. according to the illustration on the left, the illustration 1 indicates these positions on the right. type cc c side c side * k mark and k mark k mark and k mark type aa a side a side * k mark and k mark k mark and k mark contact positions are designated with marks as shown below. type ac a side c side * k mark and k mark k mark and k mark m m m m m m the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
|
