saw components data sheet r 732
2 dec 18, 2001 saw components r 732 433,96 mhz resonator data sheet ceramic package qcc8c features n 1-port resonator n provides reliable, fundamental mode, quartz fre- quency stabilization i.e. in transmitters or local oscillators terminals n ni, gold plated dimensions in mm, approx. weight 0,1 g pin configuration 2 input 6 output, grounded in 1-port conf. 4,8 ground (case) 1,3 float 5,7 float / ground e lectrostatic s ensitive d evice ( esd ) type ordering code marking and package according to packing according to r 732 b39431-r 732-u310 c61157-a7-a56 f61074-v8070-z000 maximum ratings operable temperature range t a C45/+120 ?c storage temperature range t stg C45/+120 ?c dc voltage v dc 12 v between any terminals source power p s 0 dbm
3 dec 18, 2001 saw components r 732 433,96 mhz resonator data sheet characteristics reference temperature: t a = 25 ?c terminating source impedance: z s = 50 w terminating load impedance: z l = 50 w 1) center frequency is defined as maximum of the real part of the admittance 2) if used in two port configuration (pin 2-input, pin 6-output) c 0 is reduced by approx. 0,3 pf. 3) temperature dependence of f c : f c ( t a ) = f c ( t 0 )(1 + tc f ( t a C t 0 ) 2 ) min. typ. max. center frequency 1) f c 433,885 433,96 434,035 mhz minimum insertion attenuation a min 1,1 1,7 db unloaded quality factor q u 7500 14600 ageing of f c 50 ppm equivalent circuit elements motional capacitance c 1 2,0 ff motional inductance l 1 67,25 m h motional resistance r 1 1323 w parallel capacitance 2) c 0 2,7 pf temperature coefficient of frequency 3) tc f C 0,03 ppm/k 2 turnover temperature t 0 2040?c
4 dec 18, 2001 saw components r 732 433,96 mhz resonator data sheet published by epcos ag surface acoustic wave components division, saw ce ae pd p.o. box 80 17 09, d-81617 mnchen ? epcos ag 2001. all rights reserved. a s far as patents or other rights of third parties are concerned, liability is only assumed for compo- nents per se, not for applications, processes and circuits implemented within components or assemblies. t he information describes the type of component and shall not be considered as assured characteristics. t erms of delivery and rights to change design reserved. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
|
