12,7 12,7 21,7 31,5 9 12 56 diamond sa via dei patrizi 5 ch-6616 losone tel. ++41-91/785 45 45 fax ++41-91/785 45 00 e-mail: info@diamond-fo.com e-2000 duplex single mode/ multimode e-2146.6/e-2156.6 single mode apc e-2148.6 specifications subject to change without notice 002-037-210p002100 diamond fiber optic components the unique, user-friendly features of the diamond e-2000 connector, coupled with its rapid and enthusiastic worldwide acceptance, have prompted the development of a duplex version of this product. the e-2000 duplex connector is a natural extension of the current product. through the use of a simple clip-bridge and an extended thumb-latch, it offers the same renowned performance and stability as the single fiber version. furthermore, it uses common components and can be terminated using existing tooling. similar to single fibre the e-2000 duplex features the following highlights: injection molded housing (ul 94 v0 flammability rating) positive latching mechanism with interchangeable, color-coded thumb-lacht spring-loaded shutters integrated protective caps guiding tracks interchangeable color-coded mating adapter frames compact, rectangular footprint; push-pull design existing components can be upgrated to duplex throgh the use of a simple clip-bridge and an extended thumb-latch two-component ferrule the e-2000 duplex connector is available in multimode, single mode convex polished (pc) and 8 angle polished (apc) version. 1234 single mode apc type designation: e-2148.6 ferrule material: zirconia/copper-nickel alloy insert (pilzferrule) external parts: plastic (green) polish geometry: 8 angled (apc) dimensions order number fiber/cable unterminated connector terminated assembly 9/125/900 - 0 0 0 - 0 0 1 l 0 0 0 - x x x - 0 0 1 l x x x 9/125/900/3000/6500 - 0 0 0 - 0 0 4 l 0 0 0 - x x x - 0 5 4 l x x x thumb-latch green blue black red orange yellow white violet order no. 305 315 325 335 345 355 365 375 connectors for other fiber and cable dimensions available upon request. mating adapter type designation: e-2210.2-*** mating sleeve: zirconia external parts: plastic green frame color order number frame color order number blue 1 6 5 - 3 0 1 - 9 0 5 v 2 1 1 orange 1 6 5 - 3 0 1 - 9 0 5 v 2 5 5 green 1 6 5 - 3 0 1 - 9 0 5 v 2 2 2 yellow 1 6 5 - 3 0 1 - 9 0 5 v 2 6 6 black 1 6 5 - 3 0 1 - 9 0 5 v 2 3 3 white 1 6 5 - 3 0 1 - 9 0 5 v 2 7 7 red 1 6 5 - 3 0 1 - 9 0 5 v 2 4 4 violet 1 6 5 - 3 0 1 - 9 0 5 v 2 8 8 mounting instructions max wall thickness 2 mm 42 13 21,7 13 12,7 30 30 22 13,3 4 2,2 +0.2 0 ?.2 ?.2 ?.1
a b e d c the e-2000 permits the user to specify the color of the thumb-latch and the mating adapter frame so that different line types, uses, destinations and points of origin, etc. can be readily identified. the thumb-latch and frame are available in eight distinct colors: 1. blue (ral 5015) 5. orange (ral 2003) 2. white (ral 9010) 6. yellow (ral 1016) 3. black (ral 9005) 7. green (ral 6018) 4. red (ral 3020) 8. violet (ral 4008) in addition, colored connector bodies and mating adapter housings are used to identify the ferrule polish. blue (ral 5015) is used for connectors with convex polished (pc) ferrules and green (ral 6018) identifies 8 angle polished (apc) types. materials: connector and mating adapter item component material connector 1 housing pbt 2 protective cap metal/plastic 3 cable boot pur 4 thumb-latch pbt 5 ferrule 2,5 mm zirconia/cu-ni insert (pilz) 6 ferrule case lcp 7 bridge pom mating adapter a outer housing pbt b coded frame pbt c shutters metal d inner housing lcp e alignment sleeve zirconia specifications: multimode single mode single mode 8 apc single mode 0.1 db units test conditions insertion loss (il) typ 0.15 max 0.4 typ 0.2 max 0.4 typ 0.2 max 0.4 max 0.1 db iec 1300-3-4; = 1300/1550nm return loss (rl) typ -40 min 50 min 70* min 85* db iec 1300-3-6; = 1300/1550nm repeatability of il max 0.1 - db over service life service life 1000 mate/demate cycles operating temperature -40 / +85 c may be further limited by cable specifications storage temperature -40 / +90 c may be further limited by cable specifications * measured with high precision reflectometer. 12,7 12,7 21,7 2 5 6 1 7 4 3 31,5 9 12 56 1234 1234 order number codes 1 connector code 2 connector code for termination on other end of assembly - for pigtails: insert 000 - for patch assemblies: insert connector code for other connector 3 code for fiber or cable 4 length in meters order numbers: connectors single mode type designation: e-2146.6 ferrule material: zirconia/copper-nickel alloy insert (pilzferrule) external parts: plastic (blue) polish geometry: convex (pc) dimensions order number fiber/cable unterminated connector terminated assembly 9/125/900 - 0 0 0 - 0 0 1 l 0 0 0 - x x x - 0 0 1 l x x x 9/125/900/3000/6500 - 0 0 0 - 0 0 4 l 0 0 0 - x x x - 0 5 4 l x x x thumb-latch blue green black red orange yellow white violet order no. 303 313 323 333 343 353 363 373 connectors for other fiber and cable dimensions available upon request. multimode type designation: e-2156.6 ferrule material: zirconia/copper-nickel alloy insert (pilzferrule) external parts: plastic (blue) polish geometry: convex (pc) dimensions order number fiber/cable unterminated connector terminated assembly 50/125/900 - 0 0 0 - 0 0 1 l 0 0 0 - x x x - 0 0 1 l x x x 50/125/900/3000/6500 - 0 0 0 - 0 0 4 l 0 0 0 - x x x - 0 5 4 l x x x 62.5/125/900 - 0 0 0 - 0 0 1 l 0 0 0 - x x x - 0 0 1 l x x x 62.5/125/900/3000/6500 - 0 0 0 - 0 0 4 l 0 0 0 - x x x - 0 6 4 l x x x thumb-latch blue green black red orange yellow white violet order no. 304 314 324 334 344 354 364 374 connectors for other fiber and cable dimensions available upon request. mating adapter type designation: e-2210.2-*** mating sleeve: zirconia external parts: plastic blue frame color order number frame color order number blue 1 6 5 - 3 0 1 - 9 0 5 v 1 1 1 orange 1 6 5 - 3 0 1 - 9 0 5 v 1 5 5 green 1 6 5 - 3 0 1 - 9 0 5 v 1 2 2 yellow 1 6 5 - 3 0 1 - 9 0 5 v 1 6 6 black 1 6 5 - 3 0 1 - 9 0 5 v 1 3 3 white 1 6 5 - 3 0 1 - 9 0 5 v 1 7 7 red 1 6 5 - 3 0 1 - 9 0 5 v 1 4 4 violet 1 6 5 - 3 0 1 - 9 0 5 v 1 8 8 mounting instructions max wall thickness 2 mm 42 13 21,7 13 12,7 30 30 22 13,3 4 2,2 +0.2 0 0.2 0.2 0.1
|
