amp technical support center/amp fax service dimensions are in www.amp.com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. 217 rf coax connectors osmt interconnect system surface mount coaxial connectors catalog 1307191 revised 9-00 6.20 [.245] clearance for disengagement 4.20 [.165] mated profile slotted cable entry osmt right angle jack osmt plug max. min. the osmt interconnect system is designed to meet the growing demand for surface mount rf connec- tor technology. the osmt occupies less printed circuit board (pcb) real estate than conventional through hole coaxial connectors. an innovative microstrip mount- ing pattern and plug recep- tacle design ensure reliable grounding and pcb reten- tion characteristics. the osmt interconnect system also allows closer pcb pitch/spacing, standing a mere 4.2 [.165] (fully mated height) off the board. a new higher cable retention plug high retention design m/a-com part model number no. 2367-5006-54 1055690-1 receptacle has been added to the osmt product family. this new design addresses applications where force is applied to the mated con- nector interface as a result of cable flexure between boards or around other pcb components. the osmt interconnect system consistently achieves broad band elec- trical performance through 6 ghz with a maximum vswr of 1.20:1 at 2 ghz and 1.40:1 at 6 ghz. this broad band performance establishes a reliable inter- face that can be utilized for future system upgrades without concerns for perfor- mance degradation. the osmt plug receptacle is designed for high volume assembly using surface mount technology and is available in tape and reel packaging for automated pick and place board assembly. the mating cable jack is available terminated to a specially designed coax cable as either a pigtail, jumper or standard interseries connector assembly. specially designed engage/ disengage tooling is avail- able to ensure proper alignment of the osmt interface during assembly. the higher retention plug receptacle can be hand engaged as a result of a unique lead-in chamfer design which also aligns the contacts prior to mating to ensure mechanical integrity. interface durability is rated at 100 mating cycles. the osmt interconnect system is ideal for surface mount applications in telecommunictions, gps, consumer and automotive electronics. the osmt pro- vides versatile rf solutions for next generation intercon- nect needs. 5.30 [.208] clearance for disengagement 4.20 [.165] mated profile 360 cable rotation osmt right angle jack osmt plug max. min. m/a-com part model number no. 2367-0000-54 1251802-1 features occupies less (pcb) real- estate than conventional through hole connectors 4.2 [.165] fully mated height off pcb performance through 6ghz tape & reel packaging available applications telecommunications gps consumer & automotive electronics
amp technical support center/amp fax service dimensions are in www.amp.com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. 218 rf coax connectors osmt surface mount coaxial connectors catalog 1307191 revised 9-00 general materials osmt plug housing: polyphenylene sulfide contacts: copper alloy osmt cable jack outer contact: beryllium copper inner contact: beryllium copper dielectric: polypropylene, gf finish plug and cable jack - contacts: gold plate over nickel plate electrical frequency dc - 6 ghz nominal impedance 50 ohms voltage rating 250 volts (vrms maximum) @ sea level vswr (mated connectors only) 1.20:1 maximum @ 2 ghz 1.40:1 maximum @ 6 ghz insulation resistance 1000 megohms minimum dielectric withstanding voltage 500 volts (vrms minimum) @ sea level contact resistance (connectors only) center contact 15 milliohms maximum outer contact 10 milliohms maximum insertion loss (connectors only) .15db max. @ 6 ghz mechanical connector durability 100 mating cycles tape/reel packaging (plug) 12mm per eia-481 force to engage 4.0 lbs. max. (2.5 lbs. typ.) force to disengage 4.5 lbs. max. (3.0 lbs. typ.) environmental temperature rating (mated pair) pvc flexible cable: -40? (-40?) to +105? (221?) resistance to solder heat infrared, convection and vapor phase solderable (plug only). maximum reflow time/temperature not to exceed 260? for 3 minutes. cable specifications materials pvc flexible cable (105?) jacket: polyvinyl chloride shield: silver plated copper wire, 38 awg, 90% min. coverage dielectric: pfa or fep center conductor: silver plated copper clad steel, 30 awg minimum bend radius 9.5 [.375] insertion loss (pvc and fep cable only) 0.4 db/ft., 1.3d b/m @ 500 mhz 0.6 db/ft., 2.0 db/m @ 1 ghz 0.9 db/ft., 3.0 db/m @ 2 ghz center conductor resistance .26 ohms per foot average (pvc and fep cable only) .254 [.010] 1.90 [.075] 0.73 [.028] 1.30 [.052] dia. ref. dia. dia. dia. specifications
amp technical support center/amp fax service dimensions are in www.amp.com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. 219 rf coax connectors osmt surface mount coaxial connectors (continued) catalog 1307191 revised 9-00 4.50 [.177] 5.00 [.197] 2.10 [.081] 3.00 [.118] 4.50 [.177] 4.00 [.157] 4.00 [.157] 1.00 [.039] 4 plcs. ref. 4.50 [.177] ref. 4.50 [.177] 5.00 [.197] 3.00 [.118] 3.00 [.118] 4.50 [.177] 4.00 [.157] 4.00 [.157] 1.00 [.039] 4 plcs. ref. 4.50 [.177] ref. packaging quantity m/a-com part model no. no. bulk customer 2367-0000-54 1251802-1 specified 178 800 2367-5001-54 1083946-1 [7.0] pcs/reel dia. taping 330 3000 2367-5002-54 1055689-1 [13.3] pcs/reel dia. taping note: requires part number 1221286-1 engagement/disengagement tool. packaging quantity m/a-com part model no. no. bulk customer 2367-5006-54 1055690-1 specified 178 600 2367-5015-54 1254242-1 [7.0] pcs/reel dia. taping 330 2500 2367-5016-54 1055692-1 [13.3] pcs/reel dia. taping note: requires part number 1055886-1 disengagement tool. engagement requires no tooling. straight smt pcb mount plug receptacles multi-directional cable entry, 360 rotation. recommended for use in passive cable applications or with supplementary cable tie-downs. slotted single direction cable entry. recommended for use in applications where bending forces may be applied to the cable.
amp technical support center/amp fax service dimensions are in www.amp.com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. 220 rf coax connectors osmt surface mount coaxial connectors (continued) catalog 1307191 revised 9-00 cable lengths m/a-com model no. part no. 100 9950-3100-23 1064353-1 [4.0] 200 9950-3200-23 1064357-1 [8.0] 305 9950-3305-23 1064358-1 [12.0] notes: 1. consult amp for non-standard cable lengths. 2. connector centerlines align 180 30 as shown. 3. cable length tolerance: 50.0 [1.97]-20000.0 [787.4]: (2.0 [0.08] +1% of cable length) 3.10 [.122] ref. 2.80 [.110] dia. ref. 2 plcs. cable length 1 centerline to centerline right angle jack to jack cable assembly 180 offset right angle jack to jack cable assembly right angle jack to jack cable assembly 180 offset cable lengths m/a-com model no. part no. 100 9950-1100-23 1064303-1 [4.0] 200 9950-1200-23 1064309-1 [8.0] 305 9950-1305-23 1064315-1 [12.0] notes: 1. connectors are randomly aligned. 2. consult amp for non-standard cable lengths. cable length tolerance: 50.0 [1.97]-20000.0 [787.4]: (2.0 [0.08] +1% of cable length) 3.10 [.122] ref. 2.80 [.110] dia. ref. 2 plcs. cable length 1 centerline to centerline
amp technical support center/amp fax service dimensions are in www.amp.com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. 221 catalog 1307191 revised 8-00 rf coax connectors osmt surface mount coaxial connectors (continued) cable length m/a-com model no. part no. 100 9950-4100-03 1064369-1 [4.0] 200 9950-4200-03 1064393-1 [8.0] 305 9950-4305-03 1064411-1 [12.0] inter-series cable assemblies sma straight plug 1.90 [.075] cable ref. cable length 19.2 [.755] ref. 6.35 [.250] 2.80 [.110] ref. 3.10 [.122] ref. sma bulkhead feed through jack 1.90 [.075] cable ref. cable length 21.3 [.837] ref. 2.80 [.110] ref. 3.10 [.122] 6.40 [.250] min. 6.00 [.235] min. recommended mounting hole 6.35 [.250] ref. cable length m/a-com model no. part no. 100 9950-4100-01 1064367-1 [4.0] 200 9950-4200-01 1064391-1 [8.0] 305 9950-4305-01 1064409-1 [12.0] smb straight plug cable length 21.9 [.862] ref. 1.90 [.075] cable ref. 6.35 [.250] 2.80 [.110] ref. 3.10 [.122] ref. cable length m/a-com model no. part no. 100 9950-4100-08 1081124-1 [4.0] 200 9950-4200-08 1064397-1 [8.0] 305 9950-4305-08 1064414-1 [12.0]
amp technical support center/amp fax service dimensions are in www.amp.com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. 222 catalog 1307191 revised 8-00 mcx straight plug cable length 20.9 [.822] ref. 6.35 [.250] 2.80 [.110] ref. 3.10 [.122] ref. 1.90 [.075] cable ref. cable length m/a-com model no. part no. 100 9950-4100-15 1064374-1 [4.0] 200 9950-4200-15 1408003-1 [8.0] 305 9950-4305-15 1408003-2 [12.0] mcx right angle plug cable length 10.8 [.425] 6.10 [.241] 7.90 [.312] ref. 1.90 [.075] cable ref. 6.35 [.250] 2.80 [.110] ref. 3.10 [.122] ref. cable length m/a-com model no. part no. 100 9950-4100-16 1064375-1 [4.0] 200 9950-4200-16 1064401-1 [8.0] 305 9950-4305-16 1064416-1 [12.0] rf coax connectors osmt surface mount coaxial connectors (continued) smb bulkhead feed through jack cable length 17.1 [.675] ref. 6.35 [.250] 2.80 [.110] ref. 3.10 [.122] ref. 4.90 [.192] 4.40 [.172] min. min. recommended mounting hole 1.90 [.075] cable ref. cable length m/a-com model no. part no. 100 9950-4100-10 1408002-1 [4.0] 200 9950-4200-10 1064399-1 [8.0] 305 9950-4305-10 1408002-2 [12.0] inter-series cable assemblies (continued)
223 rf coax connectors osmt surface mount coaxial connectors (continued) catalog 1307191 revised 9-00 amp technical support center/amp fax service dimensions are in www.amp.com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. smb right angle plug cable length 6.35 [.250] 10.8 [.427] 14.0 [.550] 2.80 [.110] ref. 3.10 [.122] ref. 1.90 [.075] cable ref. cable length m/a-com model no. part no. 100 9950-4100-27 1408004-1 [4.0] 200 9950-4200-27 1408004-2 [8.0] 305 9950-4305-27 1408004-3 [12.0] mcx bulkhead jack cable length 16.8 [.662] ref. 6.35 [.250] 2.80 [.110] ref. 11.4 [.447] 3.10 [.122] ref. 4.90 [.192] 4.50 [.177] min. min. recommended mounting hole 1.90 [.075] cable ref. ref. 4.80 [.189] dia. cable length m/a-com model no. part no. 100 9950-4100-38 1408005-1 [4.0] 200 9950-4200-38 1408005-2 [8.0] 305 9950-4305-38 1408005-3 [12.0] 50 ohm d-sub coaxial receptacle cable length 25.6 [1.01] ref. 6.35 [.250] 2.80 [.110] ref. 4.90 [.192] 4.50 [.177] min. min. recommended mounting hole 1.90 [.075] cable ref. 3.10 [.122] ref. cable length m/a-com model no. part no. 100 9950-4100-39 1408006-1 [4.0] 200 9950-4200-39 1408006-2 [8.0] 305 9950-4305-39 1408006-3 [12.0] inter-series cable assemblies (continued)
224 rf coax connectors osmt surface mount coaxial connectors (continued) catalog 1307191 revised 9-00 amp technical support center/amp fax service dimensions are in www.amp.com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. tools engagement/disengagement tool disengagement tool 101.6 [4.00] 6.40 [.250] 9.50 [.375] 6.40 [.250] ref. sma straight plug (male) recommended for customer system verification cable length 1 centerline to reference plane right angle jack cable pigtail cable length 1 cable length m/a-com model no. part no. 100 9950-2100-23 1064331-1 [4.0] 200 9950-2200-23 1064333-1 [8.0] 305 9950-2305-23 1064338-1 [12.0] note: 1. consult amp for non-standard cable lengths. cable length tolerance: 50.0 [1.97]-20000.0 [787.4]: (2.0 [0.08] +1% of cable length) 2. to avoid damaging the cable, minimize time at temperature while soldering and/or heat shrinking connector to the cable. cable length m/a-com model no. part pvc flexible cable no. 200 9950-4200-01 1064391-1 [8.0] finish: sma, passivated stainless steel body and gold plated center contact. m/a-com part model no. no. 2598-5401-54 1055886-1 see application notes for instructions. for use with 1055690-1 plug only m/a-com part model no. no. 2598-5342-54 1221286-1 see application notes for instructions. for use with 1251802-1 plug only
225 rf coax connectors osmt surface mount coaxial connectors (continued) catalog 1307191 revised 9-00 amp technical support center/amp fax service dimensions are in www.amp.com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. osmt plug to sma jack adapter 10.5 [.413] ref. sma jack ssmt plug 13.7 [.538] ref. sma plug ssmt plug 12.9 [.508] ref. sma jack ssmt jack 16.2 [.639] ref. sma plug ssmt jack osmt jack to sma jack adapter m/a-com part model no. no. 2382-2240-00 1055696-1 m/a-com part model no. no. 2381-2241-00 1055695-1 m/a-com part model no. no. 2380-2240-00 1055694-1 m/a-com part model no. no. 2382-2241-00 1055697-1 osmt plug to sma plug adapter osmt jack to sma plug
amp technical support center/amp fax service dimensions are in www.amp.com specifications 1-800-522-6752 717-986-7777 millimeters over [inches] subject to change. 226 rf coax connectors engineering notes (continued) catalog 1307191 revised 9-00
|
