1 revision date: 6/17/2009 new product silicon zener diode series 1n4099 thru 1n4135, 1n4099-1 thru 1n4135-1 maximum ratings junction temperature: -65c to +175c storage temperature: -65c to +175c dc power dissipation: 500 mw @ +50c power derating: 4 mw / c above +50c forward voltage @ 200ma: 1.1 volts maximum features ? 1n4099-1 thru 1n4135-1 available in jan, jantx, jantxv and jans per mil-prf-19500/435 ? low current operation at 250 a ? low reverse leakage and low noise characteristics ? metallurgically bonded ? also available in do-213 melf style package jedec nominal zener maximum maximum maximum maximum type zener test zener reverse current noise zener number voltage current impedance i r @ v r density current v z @ i zt i zt (note 3) n d @ i zt i zm (note 1) (note 2) z zt @ i zt volts ma ohms a volts v/hz ma 1n4099 6.8 250 200 10 5.17 40 56 1n4100 7.5 250 200 10 5.70 40 51 1n4101 8.2 250 200 1.0 6.24 40 46 1n4102 8.7 250 200 1.0 6.61 40 44 1n4103 9.1 250 200 1.0 6.92 40 42 1n4104 10 250 200 1.0 7.60 40 38 1n4105 11 250 200 0.05 8.44 40 35 1n4106 12 250 200 0.05 9.12 40 32 1n4107 13 250 200 0.05 9.87 40 29 1n4108 14 250 200 0.05 10.65 40 27 1n4109 15 250 100 0.05 11.40 40 25 1n4110 16 250 100 0.05 12.15 40 24 1n4111 17 250 100 0.05 12.92 40 22 1n4112 18 250 100 0.05 13.67 40 21 1n4113 19 250 150 0.05 14.44 40 20 1n4114 20 250 150 0.01 15.20 40 19 1n4115 22 250 150 0.01 16.72 40 17 1n4116 24 250 150 0.01 18.25 40 16 1n4117 25 250 150 0.01 19.00 40 15 1n4118 27 250 150 0.01 20.46 40 14 1n4119 28 250 200 0.01 21.28 40 14 1n4120 30 250 200 0.01 22.80 40 13 1n4121 33 250 200 0.01 25.08 40 12 1n4122 36 250 200 0.01 27.38 40 11 1n4123 39 250 200 0.01 29.65 40 9.8 1n4124 43 250 250 0.01 32.65 40 8.9 1n4125 47 250 250 0.01 35.75 40 8.1 1n4126 51 250 300 0.01 38.76 40 7.5 1n4127 56 250 300 0.01 42.60 40 6.7 1n4128 60 250 400 0.01 45.60 40 6.4 1n4129 62 250 500 0.01 47.10 40 6.1 1n4130 68 250 700 0.01 51.68 40 5.6 1n4131 75 250 700 0.01 57.00 40 5.1 1n4132 82 250 800 0.01 62.32 40 4.6 1n4133 87 250 1000 0.01 66.12 40 4.4 1n4134 91 250 1200 0.01 69.16 40 4.2 1n4135 100 250 1500 0.01 76.00 40 3.8 electrical specifications @ +25 oc (unless otherwise specified) note 1: the jedec type numbers shown above have a zener voltage tolerance of + 5% of the nominal zener voltage. vz is measured with the device junction in thermal equilibrium at an ambient temperature of 25c + 3c. a c suffix denotes a + 2% tolerance and a d suffix denotes a + 1% tolerance.
our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused. revision date: 6/17/2010 aeroflex / metelics, inc. 975 stewart drive, 54 grenier field road, sunnyvale, ca 94085 londonderry, nh 03053 tel: (408) 737-8181 tel: (603) 641-3800 fax: (408) 733-7645 fax: (603)-641-3500 sales: 888-641-semi (7364) hi-rel components 9 hampshire street, lawrence, ma 01840 tel: (603) 641-3800 fax: (978) 683-3264 www.aeroflex.com/metelics-hirelcomponents aeroflex / metelics, inc. reserves the right to make changes to any products and services herein at any time without notice. consult aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by aeroflex; nor does the purchase, lease, or use of a product or service from aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of aeroflex or of third parties. copyright 2010 aeroflex / metelics. all rights reserved. www.aeroflex.com/metelics metelics-sales@aeroflex.com iso 9001: 2008 certified companies 1n4099 thru 1n4135, 1n4099-1 thru 1n4135-1 .1 .2 .5 1 2 5 10 20 50 100 operating current i zt (ma) zener impedance zzt (ohms) 1000 500 400 300 200 100 50 40 30 20 10 5 4 3 2 1 leaded design data case: hermetically sealed glass case, do C 35 lead material: copper clad steel lead finish: tin / lead thermal r esistance: (r jec ): 250 ?c/w maximum at l = .375 in thermal impedance: (z jx ): 35?c/w maximum polarity: diode to be operated with the banded (cathode) end positive mounting position: any 0.080 2.03 max dia polarity band (cathode) 0.018 / 0.022 0.457 / 0.559 dia 0.175 4.44 max 1.000 25.400 min all dimensions in inch mm 1.000 25.400 min outline drawing graphs 400 300 200 100 0 jl, junction to lead thermal resistance (c/w) 0 0.2 0.4 0.6 0.8 1.0 l, lead length to heat sink (inches) typical thermal resistance
|
