 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 1 0.5 mm pitch, 2.55 mm above the board, flexible printed circuit & flexible flat cable zif connectors FH28 series features 1. precise ffc/fpc positionining large angle of the actuator opening and built-in side guides in the connector allow straight and exact insertion of the fpc / ffc. 2. rotating actuator proven rotating actuator system allows easy zif connection, confirming it with a definite tactile feel. the contact securely holds the actuator in place, providing reliable normal force. the unique contact configuration assures that the connector will remain dimensionally stable over the devices life. 3. strong ffc / fpc retention force horizontal direction ffc / fpc retention force : increased 200% (as compared with fh12 series)(30 pos.) 4. accepts standard fpc/ffc thickness 0.3mm thick standard flexible printed circuit (fpc) and flexible flat cable (ffc) can be used. 5. conductive traces on the pcb can run under the connector no exposed contacts on the bottom of the connector. 6. board placement with automatic equipment flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. standard reel packaging contains 2,000 connectors. 7. halogen-free * *as defined by iec61249-2-21 br-900ppm maximum, cl-900ppm maximum, cl + br combined-1,500ppm maximum 8. optional 500 piece reel packaging standard packaging is 2,000 pieces per reel; however, 500 piece reels are possible. (emboss reel external diameter is 330mm.) actuator color: dark brown 2010.9 hold in place by contacts hold in place by metal fittings overview continuing market trends demand higher contact count connectors while maintaining high electrical/mechanical reliability, exact fpc/ffc positioning and durability. fpc temporary hold protrusion support straight type fpc / ffc secure actuator lock and retention t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n .
FH28 series0.5 mm pitch, 2.55 mm above the board, flexible printed circuit & flexible flat cable zif connectors 2 fh 28 d - 50s - 0.5 sh (05) product specifications storage temperature range -10? to +50? (note 3) storage humidity range relative humidity 90% max materials / finish insulator lcp color: gray ul94v-0 actuator lcp color: black contacts phosphor bronze gold plated ------- metal fittings brass tin plated ------- part material finish remarks note 1: when passing the current through all of the contacts,use 70% of the current rating. note 2: includes temperature rise caused by current flow. note 3: the term ?torage?refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. note.4: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. item specification conditions ordering information series name : fh series no. : 28 blank,d : standard h : space saving type number of positions : 10 to 80 contact pitch : 0.5mm termination type : smt horizontal mounting type specifications (05)gold plated,2,000 pieces / reel (10)partial gold plated,2,000 pieces / reel (07)gold plated(only 40pos.),2,000 pieces / reel (98)gold plated,500 pieces / reel 1 2 3 4 5 1 2 3 4 5 6 7 6 7 rating rated current 0.5a dc(note.1) rated voltage 50v ac operating temperature range-40? to +85?(note 2) operating humidity rangerelative humidity 90% max. (no condensation) recommended fpc/ffc thickness: = 0.3 0.05mm gold plated contact traces 1.insulation resistance 2.withstanding voltage 3.contact resistance 4.durability (insertion/ withdrawal) 5.vibration 6.shock 7.humidity (steady state) 8.temperature cycle 9.resistance to soldering heat 500 m? min no flashover or insulation breakdown. 50 m? max. * including fpc/ffc conductor resistance contact resistance: 50 m? max. no damage, cracks, or parts dislocation. no electrical discontinuity of 1s or more. contact resistance: 50 m? max. no damage, cracks, or parts dislocation. no electrical discontinuity of 1s. min. contact resistance: 50 m? max. no damage, cracks, or parts dislocation. contact resistance: 50 m? max. insulation resistance: 50 m? min. no damage, cracks, or parts dislocation. contact resistance: 50 m? max. insulation resistance: 50 m? min. no damage, cracks, or parts looseness. no deformation of components affecting performance. 100 v dc 150 v ac /one minute 1 ma (dc or 1000hz) 20 cycles frequency: 10 to 55 hz, single amplitude of 0.75 mm, 10 cycles in each of the 3 directions. acceleration of 981 m/s2, 6 ms duration, sine half- wave waveform, 3 cycles in each of the 3 axis. 96 hours at temperature of 40? and humidity of 90% to 95%. temperature: -40? ?+15? to+35? ?+85? ? +15? to +35? time: 30?2 to 3?30?2 to 3 (minutes) 5 cycles reflow: at the recommended temperature profile manual soldering: 350? 5? for 5 seconds t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n . 3 FH28 series 0.5 mm pitch, 2.55 mm above the board, flexible printed circuit & flexible flat cable zif connectors 1 2 0 0.1max 0.05max number of contacts indicator polarizing mark indicator (5.4) (1.3) (2.85) (3.65) 0.1max 0.05max 1 2 b a 0.5 (0.2) 4.5 0.7 1.2 c(fpc/ffc insertion slot dimension) d (1.9) 6.5 5.7 e 0 2.55 connector dimensions standard type unit: mm note 1: tape and reel packaging. order by number of reels. note 2: metal fittings protruded type (FH28e) is available. contact hirose for details. note 3: ** indicates the specification. for details, please refer to ordering information. part number FH28-10s-0.5sh(**) FH28-15s-0.5sh(**) FH28d-20s-0.5sh(**) FH28d-28s-0.5sh(**) FH28d-30s-0.5sh(**) FH28-40s-0.5sh(**) FH28-45s-0.5sh(**) FH28d-50s-0.5sh(**) FH28d-55s-0.5sh(**) FH28-60s-0.5sh(**) FH28d-64s-0.5sh(**) FH28d-68s-0.5sh(**) FH28d-74s-0.5sh(**) cl586-1861-4-** cl586-1868-3-** cl586-1823-5-** cl586-1835-4-** cl586-1827-6-** cl586-1803-8-** cl586-1848-6-** cl586-1808-1-** cl586-1821-0-** cl586-1811-6-** cl586-1813-1-** cl586-1819-8-** cl586-1828-9-** 10 15 20 28 30 40 45 50 55 60 64 68 74 4.5 7 9.5 13.5 14.5 19.5 22 24.5 27.0 29.5 31.5 33.5 36.5 9.9 12.4 14.9 18.9 19.9 24.9 27.4 29.9 32.4 34.9 36.9 38.9 41.9 5.57 8.07 10.57 14.57 15.57 20.57 23.07 25.57 28.07 30.57 32.57 34.57 37.57 9.58 12.08 14.58 18.58 19.58 24.58 27.08 29.58 32.08 34.58 36.58 38.58 41.58 cl no. number of contacts a b c d notes 1 the coplanarity of each terminal lead is within 0.1. 2 the contact terminal lead position indicates the dimension from the e surface, the bottom surface of the insulator body. 3 packaged on tape and reel only. check packaging specification. 4 sight variations in color of the plastic compounds do not affect form, fit or function. 5 after reflow, the terminal plating may change color, however this does not represent a quality issue. t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n . 4 FH28 series0.5 mm pitch, 2.55 mm above the board, flexible printed circuit & flexible flat cable zif connectors 1 2 0 0.1max 0.05max number of contacts indicator polarizing mark indicator (5) (1.3) (2.85) (3.15) 0.1max 0.05max 1 2 b a 0.5 (0.2) 4.5 0.7 1.2 c(fpc/ffc insertion slot dimension) d (1.9) 6 5.7 e 0 2.55 space saving type notes 1 the coplanarity of each terminal lead is within 0.1. 2 the contact terminal lead position indicates the dimension from the e surface, the bottom surface of the insulator body. 3 packaged on tape and reel only. check packaging specification. 4 sight variations in color of the plastic compounds do not affect form, fit or function. 5 after reflow, the terminal plating may change color, however this does not represent a quality issue. unit: mm note1: tape and reel packaging. order by number of reels. note2: **indicates the specification. for details, please refer to ordering information. part number FH28h-80s-0.5sh(**) 586-1805-3-** cl no. 80 39.5 44.9 40.57 45.7 number of contacts a b c d t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n . 5 FH28 series 0.5 mm pitch, 2.55 mm above the board, flexible printed circuit & flexible flat cable zif connectors h0.1 j0.1 a0.05 0.50.05 0.30.03(land) 0.250.03(metal mask) 2.20.1 3.90.1 1.30.1 h0.1 j0.1 a0.05 0.50.05 0.30.03(land) 0.250.03(metal mask) 1.80.1 4.20.1 1.30.1(land) 10.05(metal mask) r0.2max r0.2max r0.2max r0.2 0.50.05 0.30.03 0.30.05 0.50.1 0.50.1 a0.05 f0.07 g0.1 3.5min 1.40.1 2.80.1 4.5min c0.5max 1 w recommended pcb mounting pattern and metal mask dimensions recommended fpc/ffc dimensions recommended metal mask thickness: 0.15 mm. standard type(FH28, FH28d) space saving type(FH28h) unit: mm part number FH28-10s-0.5sh(**) FH28-15s-0.5sh(**) FH28d-20s-0.5sh(**) FH28d-28s-0.5sh(**) FH28d-30s-0.5sh(**) FH28-40s-0.5sh(**) FH28-45s-0.5sh(**) FH28d-50s-0.5sh(**) FH28d-55s-0.5sh(**) FH28-60s-0.5sh(**) FH28d-64s-0.5sh(**) FH28d-68s-0.5sh(**) FH28d-74s-0.5sh(**) FH28h-80s-0.5sh(**) cl586-1861-4-** cl586-1868-3-** cl586-1823-5-** cl586-1835-4-** cl586-1827-6-** cl586-1803-8-** cl586-1848-6-** cl586-1808-1-** cl586-1821-0-** cl586-1811-6-** cl586-1813-1-** cl586-1819-8-** cl586-1828-9-** cl586-1805-3-** 10 15 20 28 30 40 45 50 55 60 64 68 74 80 5.5 8 10.5 14.5 15.5 20.5 23 25.5 28.0 30.5 32.5 34.5 37.5 40.5 7.1 9.6 12.1 16.1 17.1 22.1 24.6 27.1 29.6 32.1 34.1 36.1 39.1 42.1 10.6 13.1 15.6 19.6 20.6 25.6 28.1 30.6 33.1 35.6 37.6 39.6 42.6 46.7 7 9.5 12.0 16.0 17.0 22.0 24.5 27.0 29.5 32.0 34.0 36.0 39.0 42.0 cl no. number of contacts f g h j notes 1 straight type fpc / ffc does not have the side-protruding retention tabs (cross-hatched areas). 2 w dimension should be 3.5mm min. t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n . 6 FH28 series0.5 mm pitch, 2.55 mm above the board, flexible printed circuit & flexible flat cable zif connectors FH28 series fpc construction (recommended specifications) 1. using single-sided fpc 1. this specification is a recommendation for the construction of the FH28 series fpc and ffc (t=0.3 0.05). 2. for details about the construction, please contact the fpc/ffc manufacturers. 3. using ffc 4. precautions fpc : flexible printed circuit material name surface treatment copper foil base adhesive base film reinforcement material adhesive stiffener material thickness (m) cu 1oz polyimide 1 mil thick thermosetting adhesive polyimide 3 mil thick total covering film layer. cover adhesive polyimide 1 mil thick. 3 35 25 25 30 175 293 25 25 ffc : flexible flat cable adhesive polyester adhesive stiffener polyester film adhesive polyester polyester polyester total thermoplastic polyester 12 30 35 30 12 30 188 295 material name material thickness (m) connecting side back side connecting side back side 0.2m thick gold plated over 1 to 5 m thick nickel underplating copper foil cover adhesive covering layer film reinforcement material adhesive stiffener 2. using double-sided fpc fpc : flexible printed circuit covering layer film cover adhesive surface treatment through-hole copper copper foil base adhesive base film base adhesive cu 1 /2oz polyimide 1 mil thick thermosetting adhesive polyimide 1 mil thick total 18 25 25 50 100 297 polyimide 1 mil thick cu cu 1 /2oz polyimide 1 mil thick 3 15 18 18 25 18 material name material thickness (m) * to prevent release of the lock due to fpc bending, use of the fpc with copper foil on the back side is not recommended. connecting side back side 0.2m thick gold plated over 1 to 5 m thick nickel underplating gold plated annealed copper foil t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n . 7 FH28 series 0.5 mm pitch, 2.55 mm above the board, flexible printed circuit & flexible flat cable zif connectors standard (FH28,FH28d) standard (FH28,FH28d) space saving type (FH28h) (0.3) (3) m0.1 1.750.1 l0.1 k0.3 ?1.5 +0.1 0 120.1 20.15 40.1 (r) (q) (n) 1.7 +0.15 0 1.5 +0.1 0 (8) (6.6) un-reeling direction (0.3) (3) m0.1 1.750.1 l0.1 k0.3 ?1.5 +0.1 0 120.1 20.15 40.1 (q) (n) 1.7 +0.15 0 1.5 +0.1 0 (8.5) (7.1) un-reeling direction packaging specification embossed carrier tape dimensions embossed carrier tape dimensions reel dimensions end section blank section mounting section embossed carrier tape lead section (400mm min.) blank section top cover tape (10 pockets min.) (10 pockets min.) (?13) (?80) (?380) (2) (s:inside) (t:outside) k0.3 (0.3) (3) (8.5) (7.1) (q) 1.750.1 m0.1 40.1 20.15 120.1 (n) ?1.5 +0.1 0 t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n . 8 FH28 series0.5 mm pitch, 2.55 mm above the board, flexible printed circuit & flexible flat cable zif connectors 61.4 57.4 40.5 45.3 46.3 26.2 52.4 80 cl586-1805-3-** FH28h-80s-0.5sh(**) unit: mm part number cl no. number of contacts l m n q r s t 56 k space saving type (FH28h) k ---------- ---------- ---------- 28.4 28.4 40.4 40.4 40.4 40.4 52.4 52.4 52.4 52.4 unit: mm part number cl no. number of contacts FH28-10s-0.5sh(**) FH28-15s-0.5sh(**) FH28d-20s-0.5sh(**) FH28d-28s-0.5sh(**) FH28d-30s-0.5sh(**) FH28-40s-0.5sh(**) FH28-45s-0.5sh(**) FH28d-50s-0.5sh(**) FH28d-55s-0.5sh(**) FH28-60s-0.5sh(**) FH28d-64s-0.5sh(**) FH28d-68s-0.5sh(**) FH28d-74s-0.5sh(**) cl586-1861-4-** cl586-1868-3-** cl586-1823-5-** cl586-1835-4-** cl586-1827-6-** cl586-1803-8-** cl586-1848-6-** cl586-1808-1-** cl586-1821-0-** cl586-1811-6-** cl586-1813-1-** cl586-1819-8-** cl586-1828-9-** 10 15 20 28 30 40 45 50 55 60 64 68 74 24 24 24 32 32 44 44 44 44 56 56 56 56 l 29.4 29.4 29.4 37.4 37.4 37.4 49.4 49.4 49.4 61.4 61.4 61.4 61.4 25.4 25.4 25.4 33.4 33.4 33.4 45.4 45.4 45.4 57.4 57.4 57.4 57.4 5.5 8 10.5 14.5 15.5 20.5 23 25.5 28.0 30.5 32.5 34.5 42.3 10.3 8.8 15.3 19.3 20.3 25.3 27.8 30.3 32.8 35.3 37.3 39.3 43.3 11.5 11.5 11.5 14.2 14.2 20.2 20.2 20.2 20.2 26.2 26.2 26.2 26.2 m n q s t standard (FH28,FH28d) t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n . 9 FH28 series 0.5 mm pitch, 2.55 mm above the board, flexible printed circuit & flexible flat cable zif connectors recommended temperature profile hrs test condition solder method :reflow, ir solder composition :paste, 96.5%sn/3.0%ag/0.5%cu (senju metal industry, co., ltd.'s part number:m705-221cm5-32-10.5) test board :glass epoxy 55mm150mm1.6mm thick land,metal mask dimensions : our recommendations the temperature profiles are based on the above conditions. in individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. consult your solder paste and equipment manufacturer for specific recommendations. max 250? start (?) time (seconds) temperature 60 25? (60sec.) (60sec.) 90 sec. to 120 sec. preheating soldering 0 50 100 150 150? 200? 230? 200 250 120 t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n . 10 FH28 series0.5 mm pitch, 2.55 mm above the board, flexible printed circuit & flexible flat cable zif connectors operation and precautions operation precautions 1 1 3 do not force the actuator to open beyond its fully open position. do not use any type of tool to open the actuator. 116 2 properly insert the fpc at the positioning part of the connector. locking the fpc while it is partially inserted, may cause lock damage, disconnection of the fpc, or continuity fault. 1.fpc/ffc insertion procedure. connector installed on the board. lift up the actuator. use thumb or index finger 2 fully insert the fpc in the connector parallel to mounting surface, with the exposed conductive traces facing down. rotate down the actuator until firmly closed. it is critical that the inserted fpc/ffc is not moved and remains fully inserted. 2.fpc/ffc removal fully open the actuator. carefully withdraw the fpc/ffc exercising caution not to deform or damage it. do not forcefully bend the ffc/fpc upward. consult ffc/fpc manufacturer for the recommended bend radiuses. 4 for connectors with multiple contacts, such as 80 pos. rotate down the actuator pushing at both ends. 5 application of excessive force to the inserted fpc/ffc may cause damage to connector and may affect the reliability of electrical connection. if specific application requires continuous or repeated pull or bend of the inserted fpc/ffc, assure that the forces are not transmitted directly to the connector. 3 t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n . 11 FH28 series 0.5 mm pitch, 2.55 mm above the board, flexible printed circuit & flexible flat cable zif connectors precautions (mating/un-mating fpc with the retention tabs) operation precautions 2 avoid ?ide on avoid insertion so the cables ride on any guide. be sure not to close the actuator as the cables ride on any guide. it may cause conduction failure. 1.how to insert insert the cable into the interspace between the mold walls ( ) at both ends of entrance where the connector is inserted and the guide walls ( ) at both ends of interior connector so the cable tabs are properly located. 1 2.precautions when mating /un-mating avoid insertion in diagonal direction. do not insert the cable in diagonal direction. a part of the connector may touches the contacts resulting in deformation of the contacts. insert the cable straight into the connector and hook the cable tabs with the guide. after insertion, slightly pull the cables to make sure the cable tabs are firmly secured. no removal of the cable means correct insertion. in the event it is locked as the cables ride on a guide, absolutely avoid moving the cable. in this case, open the actuator and re-insert the cable as instructed in 1.how to insert. 1 insert the cable straight and obliquely from above. 2 slightly pull the cable to make sure the tabs are firmly secured. 3 $ m p t f u i f b d u v b u p s ride on a left guide ride on a right guide correct insertion do not close the actuator as the cables ride on. do not move the cables back and forth and around as the cables ride on the guide when the actuator is closed. t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n . |
Price & Availability of FH28
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |