01/2009 awc6312r help3 tm pcs cdma 3.4v/28dbm linear power amplifer module data sheet - rev 2.0 m9 package 8 pin 3 mm x 3 mm x 1 mm surface mount module figure 1: block diagram features ? ingap hbt technology ? high effciency: 40 % @ +28 dbm output 23 % @ +16 dbm output ? low quiescent current: 8 ma ? low leakage current in shutdown mode: <1 a ? internal voltage regulation (no need for dc/dc converter ? optimized for a 50 ? system ? low profle miniature surface mount package: 1 mm ? cdma 1xrtt, 1xev-do compliant ? rohs-compliant package, 250 o c msl-3 a wc6312r applications ? cdma/evdo pcs-band wireless handsets and data devices product description the awc6312r meets the increasing demands for higher effciency and smaller footprint in cdma 1x handsets. the awc6312r uses anadigics exclusive ingap-plus? technology, which combines hbt and phemt devices on the same die, to enable state-of-the-art reliability, temperature stability, and ruggedness. the awc6312r is part of anadigics high-efficiency-at-low-power (help?) family of cdma power amplifers, which deliver low quiescent currents and signifcantly greater effciency without a costly external dac or dc-dc converter. through selectable bias modes, the awc6312r achieves optimal efficiency across different output power levels, specifcally at low- and mid-range power levels where the pa typically operates, thereby dramatically increasing handset talk-time and standby-time. its built-in voltage regulator eliminates the need for external voltage regulation components. the 3 mm x 3 mm x 1 mm surface mount package incorporates matching networks optimized for output power, effciency, and linearity in a 50 ? system. bias control v batt v en rf in rf out gnd v mode 1 7 5 8 6 gnd at slug (pad) 3 4 2 v cc gnd
2 data sheet - rev 2.0 01/2009 awc6312r figure 2: pinout (x-ray top view) table 1: pin description v batt rf out v en rf in v mode gnd v cc gnd 1 gnd 2 8 7 gnd 6 5 3 4 pin name description 1 v batt battery voltage 2 rf in rf input 3 v mode mode control voltage 4 v enable pa enable voltage 5 gnd ground 6 gnd ground 7 rf out rf output 8 v cc supply voltage
data sheet - rev 2.0 01/2009 awc6312r 3 electrical characteristics table 2: absolute minimum and maximum ratings stresses in excess of the absolute ratings may cause permanent damage. functional operation is not implied under these conditions. exposure to absolute ratings for extended periods of time may adversely affect reliability. table 3: operating ranges the device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defned in the electrical specifcations. notes: (1) for operation at v c c = +3.2 v, p o u t is derated by 0.5 db. parameter min max unit supply voltage (v cc and v batt ) 0 +5 v mode control voltage (v mode ) 0 +3.5 v enable voltage (v en ) 0 +3.5 v rf input power (p in ) - +10 dbm storage temperature (t stg ) -40 +150 c parameter min typ max unit comments operating frequency (f) 1850 - 1915 mhz supply voltage (v cc and v batt ) +3.2 +3.4 +4.2 v p out < 28.0 dbm enable voltage (v en ) +2.2 0 +2.4 - +3.1 +0.5 v pa "on" pa "shut down" mode control voltage (v mode ) +2.2 0 +2.4 - +3.1 +0.5 v low bias mode high bias mode rf output power (p out ) 27.5 (1) +28.0 - dbm case temperature (t c ) -30 - +85 c
4 data sheet - rev 2.0 01/2009 awc6312r table 4: electrical specifcations - cdma operation (t c = +25 c, v batt = v cc = +3.4 v, v en = +2.4 v, 50 ? system, is-95 uplink waveform) notes: 1. acprs and effciency limits at 1882.5 mhz only. parameter min typ max unit comments dl 12 27 29 16 db p 287 %p9 02 = 0 v p 287 %p9 02 = +2.4 v mdfhdh3rh at + 0+rvh 3lpddh% 0+ mdfhdh% + - - -47 %f p 287 %p9 02 = 0 v p 287 %p9 02 = +2.4 v mdfhdh3rh at + 0+rvh 3lpddh% 0+ mdfhdh% + - - %f p 287 %p9 02 = 0 v p 287 %p9 02 = +2.4 v alternate channel power at + 0+rvh 3lpddh% 0+ mdfhdh% + - - -61 -62 %f p 287 %p9 02 = 0 v p 287 %p9 02 = +2.4 v 3rhhlflhf 37 20 40 23 - - % p 287 %p9 02 = 0 v p 287 %p9 02 = +2.4 v 4lhvfhhft - 8 13 ma r9 cc sl9 02 = +2.4 v dehh - 0.3 0.8 ma r9 1 sl3r 0rhrrh - 0.3 0.8 ma r9 02 sl9 02 = +2.4 v %dhh - ma r9 batt sl9 02 = +2.4 v /hddhh - a v cc 99 1 9 v 02 = 0 v 1rlvhlhfhlh%d - - - -138 -142 -133 - %p+ %p+ %p+ 0+r0+3 287 28dbm 0+r0+3 287 16 dbm + 0+ +dprlfv r rr - - -41 -30 %f 0hdvhph v 02 = 0v spshdfh - - 96 6slrv2s/hh dvslrvrsv - - %f p 287 +28 dbm edrd96 2redrd96 sslhvrhdrshdldhv /rdplvpdfvhvvlr shpdhhddlrrdlh - - 96 sslhvrhrshdldh
data sheet - rev 2.0 01/2009 awc6312r 5 application information to ensure proper performance, refer to all related application notes on the anadigics web site: http://www.anadigics.com shutdown mode the power amplifer may be placed in a shutdown mode by applying logic low levels (see operating ranges table) to both the v enable and v mode1 voltages. bias modes the power amplifer may be placed in either a low bias mode or a high bias mode by applying the appropriate table 5: bias control logic level (see operating ranges table) to the v mode pin. the bias control table lists the recommended modes of operation for various applications. two operating modes are available to optimize current consumption. high bias/high power operating mode is for p out levels > 16 dbm. at around 16 dbm output power, the pa could be mode switched to low power mode for lowest quiescent current consumption. figure 3: application circuit rf in 2 1 6 7 8 5 4 3 v enable rf in v mode gnd gnd v batt v cc rf out v cc v mode v batt c5 2.2f rf out c2 0.01f c4 2.2 f v enable c3 1000 pf c6 15 pf c1 1000 pf gnd at slug application p out levels bias mode v enable v mode v cc v b at t cdma - low power (low bias mode) < +16 dbm low +2.4 v +2.4 v 3.2 - 4.2 v > 3.2 v cdma - high power (high bias mode) > +16 dbm high +2.4 v 0 v 3.2 - 4.2 v > 3.2 v optional lower v cc in low power mode < +7 dbm low +2.4 v +2.4 v 1.5 v > 3.2 v shutdown - shutdown 0 v 0 v 3.2 - 4.2 v > 3.2 v
6 data sheet - rev 2.0 01/2009 awc6312r package outline figure 4: m9 package outline - 8 pin 3 mm x 3 mm x 1 mm surface mount module figure 5: branding specifcation 6312r llllnn bbbbcc
data sheet - rev 2.0 01/2009 awc6312r 7 component packaging pin 1 table 6: tape & reel dimensions figure 6: tape & reel packaging package type tape width pocket pitch reel capacity max reel dia 3 mm x 3 mm x 1 mm 12 mm 4 mm 2500 7"
warning anadigics products are not intended for use in life support appliances, devices or systems. use of an anadigics product in any such application without written consent is prohibited. important notice anadigics, inc. 141 mount bethel road warren, new jersey 07059, u.s.a. tel: +1 (908) 668-5000 fax: +1 (908) 668-5132 url: http://www.anadigics.com e-mail: mktg@anadigics.com anadigics, inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. the product specifcations contained in advanced product information sheets and preliminary data sheets are subject to change prior to a products formal introduction. information in data sheets have been carefully checked and are assumed to be reliable; however, anadigics assumes no responsibilities for inaccuracies. anadigics strongly urges customers to verify that the information they are using is current before placing orders. data sheet - rev 2.0 01/2009 8 awc6312r ordering information order number temperature range package description component packaging awc6312rm9q7 -30 c to +85 c rohs compliant 8 pin 3mm x 3mm x 1mm surface mount module tape and reel, 2500 pieces per reel AWC6312RM9P9 -30 c to +85 c rohs compliant 8 pin 3mm x 3mm x 1mm surface mount module partial tape and reel
|
