surface mount box contact SMBC-2-DH series 13 feb 07 major league electronics .079 cl surface mount box contact - horizontal row specification d = dual row pins per row smbc-2 xx d xx ordering information 02 lf 03 - 25 lead free packing information xx xxx horizontal polarized position leave blank if not needed if required, specify empty pin position, e.g. 012 for pin 12 surface mount h plating options matte tin all over t 10 gold on contact area / matte tin on tail gt g 10 gold on contact area / flash on tail 30 gold on contact area / matte tin on tail h gold flash over entire pin f tr = tape and reel tb = tube if left blank, packaging at mle's discretion 4235 earnings way, new albany, indiana, 47150, usa 1-800-782-3486 (usa/canada/mexico) tel: 812-944-7244 fax: 812-944-7268 e-mail: mle@mlelectronics.com web: www.mlelectronics.com specifications insertion force - single contact only - h plating: 3.7oz. (1,03n) avg with .0197 (0,50mm) sq. pin withdrawal force - single contact only - h plating: 2.2oz. (0,61n) avg with .0197 (0,50mm) sq. pin current rating: 2.0 ampere insulation resistance: 1000m ? min. dielectric withstanding: 500v ac contact resistance: 20 m ? max. operating temperature: -40c to + 105c max. process temperature: peak: 260c up to 10 secs. process: 230c up to 60 secs. wave: 260c up to 6 secs. reflow: 260c up to 10 secs. manual solder: 350c up to 5 secs. materials contact material: phosphor bronze insulator material: nylon 6t plating: au or sn over 50" (1,27) ni products cut to specific sizes are uncancellable/nonreturnable parts are subject to change without notice mates with: bstc, bstcm, bstcr, bstcrsm, bsts, tbstc, tbstcm, tbsts, tbstcm, tbsts, tshc, tshcr, tshcre, tshcrsm, tshr, tshre, tshs, tshscm, ttshc, ttshcr, ttshcre, ttshr, ttshre, ttshs, ttshsm
surface mount box contact SMBC-2-DH series 13 feb 07 revisions revision b - 4th february 2010 amendment to footprint dimension: previous dimension .320" amended dimension .354" amendment to insulator height: previous dimension .168" amended dimension .157" amendment to pin dimension: previous dimension .020" x .009" amended dimension .023" x .007" amendment to p.c board layout amendment to pins per row: previous - 01- 40 amended - 03 - 25 4235 earnings way, new albany, indiana, 47150, usa 1-800-782-3486 (usa/canada/mexico) tel: 812-944-7244 fax: 812-944-7268 e-mail: mle@mlelectronics.com web: www.mlelectronics.com
|