View HAT2050T_5963957.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

regarding the change of names mentioned in the document, such as hitachi electric and hitachi xx, to renesas technology corp. the semiconductor operations of mitsubishi electric and hitachi were transferred to renesas technology corporation on april 1st 2003. these operations include microcomputer, logic, analog and discrete devices, and memory chips other than drams (flash memory, srams etc.) accordingly, although hitachi, hitachi, ltd., hitachi semiconductors, and other hitachi brand names are mentioned in the document, these names have in fact all been changed to renesas technology corp. thank you for your understanding. except for our corporate trademark, logo and corporate statement, no changes whatsoever have been made to the contents of the document, and these changes do not constitute any alteration to the contents of the document itself. renesas technology home page: http://www.renesas.com renesas technology corp. customer support dept. april 1, 2003 to all our customers
cautions keep safety first in your circuit designs! 1. renesas technology corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. trouble with semiconductors may lead to personal injury, fire or property damage. remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. notes regarding these materials 1. these materials are intended as a reference to assist our customers in the selection of the renesas technology corporation product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to renesas technology corporation or a third party. 2. renesas technology corporation assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. all information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by renesas technology corporation without notice due to product improvements or other reasons. it is therefore recommended that customers contact renesas technology corporation or an authorized renesas technology corporation product distributor for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. renesas technology corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. please also pay attention to information published by renesas technology corporation by various means, including the renesas technology corporation semiconductor home page (http://www.renesas.com). 4. when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. renesas technology corporation assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. renesas technology corporation semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. please contact renesas technology corporation or an authorized renesas technology corporation product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. the prior written approval of renesas technology corporation is necessary to reprint or reproduce in whole or in part these materials. 7. if these products or technologies are subject to the japanese export control restrictions, they must be exported under a license from the japanese government and cannot be imported into a country other than the approved destination. any diversion or reexport contrary to the export control laws and regulations of japan and/or the country of destination is prohibited. 8. please contact renesas technology corporation for further details on these materials or the products contained therein.
HAT2050T silicon n channel power mos fet high speed power switching ade-208-660a (z) 2nd. edition feb. 1999 features low on-resistance capable of 4 v gate drive low drive current high density mounting outline tssop? 1, 8 drain 2, 3, 6, 7 source 4, 5 gate 1 2 3 4 8 7 6 5 g d s 2 4 1 s 3 g d s s 5 8 6 7 mos1 mos2
HAT2050T 2 absolute maximum ratings (ta = 25 c) item symbol ratings unit drain to source voltage v dss 100 v gate to source voltage v gss 20 v drain current i d 1a drain peak current i d(pulse) note1 4a body-drain diode reverse drain current i dr 1a channel dissipation pch note2 1.0 w channel dissipation pch note3 1.5 w channel temperature tch 150 c storage temperature tstg e 55 to + 150 c note: 1. pw 10 m s, duty cycle 1 % 2. 1 drive operation : when using the glass epoxy board (fr4 40 x 40 x 1.6 mm), pw 10s 3. 2 drive operation : when using the glass epoxy board (fr4 40 x 40 x 1.6 mm), pw 10s electrical characteristics (ta = 25 c) item symbol min typ max unit test conditions drain to source breakdown voltage v (br)dss 100 v i d = 10 ma, v gs = 0 gate to source breakdown voltage v (br)gss 20 ? ? v i g = 100 m a, v ds = 0 gate to source leak current i gss ?? 10 m av gs = 16 v, v ds = 0 zero gate voltege drain current i dss ??1 m av ds = 100 v, v gs = 0 gate to source cutoff voltage v gs(off) 1.3 ? 2.3 v v ds = 10 v, i d = 1 ma static drain to source on state r ds(on) ? 0.56 0.75 w i d = 0.5 a, v gs = 10 v note4 resistance r ds(on) ? 0.72 1.0 w i d = 0.5 a, v gs = 4 v note4 forward transfer admittance |y fs | 0.7 1.1 ? s i d = 0.5 a, v ds = 10 v note4 input capacitance ciss ? 90 ? pf v ds = 10 v output capacitance coss ? 42 ? pf v gs = 0 reverse transfer capacitance crss ? 20 ? pf f = 1mhz turn-on delay time t d(on) ? 11 ? ns v gs = 4 v, i d = 0.5 a rise time t r ? 24 ? ns v dd @ 10 v turn-off delay time t d(off) ?14?ns fall time t f ?11?ns bodyedrain diode forward voltage v df ? 0.84 1.1 v i f = 1 a, v gs = 0 note4 bodyedrain diode reverse recovery time t rr ? 85 ? ns i f = 1 a, v gs = 0 dif/ dt = 20 a/ m s note: 4. pulse test
HAT2050T 3 main characteristics 0 50 100 150 200 10 3 1 0.3 0.1 0.03 0.01 0.003 0.001 0.2 1 3 10 30 100 5 4 3 2 1 0 246810 5 4 3 2 1 0 2468 10 2.0 1.5 1.0 0.5 10v 6 v 5 v 8 v pulse test 4.0 v tc = 75 c 25 c ?5 c v = 10 v ds pulse test 3.0 v 200 10 s 100 s 1 ms pw = 10 ms channel dissipation pch (w) ambient temperature ta ( c) power vs. temperature derating drain to source voltage v (v) ds drain current i (a) d maximum safe operation area drain to source voltage v (v) ds drain current i (a) d typical output characteristics gate to source voltage v (v) gs drain current i (a) d typical transfer characteristics note 5 : when using the glass epoxy board (fr4 40x40x1.6 mm) 2 drive operation 1 drive operation operation in this area is limited by r ds(on) test condition : when using the glass epoxy board (fr4 40x40x1.6 mm), pw < 10 s ta = 25 c 1 shot pulse 1 drive operation dc operation (pw < 10 s) note5 v = 2.5 v gs
HAT2050T 4 2.0 1.6 1.2 0.8 0.4 0 2 4 6 8 10 0.2 0.5 1 2 5 10 20 20 10 5 1 2 0.5 0.2 2.0 1.6 1.2 0.8 0.4 ?0 0 40 80 120 160 0 5 2 1 0.2 0.5 0.1 0.05 1, 0.5 a 4 v i = 2 a d 0.5 a 1 a pulse test v = 10 v gs 4 v pulse test v = 2.5 v gs pulse test 0.02 0.05 0.1 0.2 0.5 1 2 25 c tc = ?5 c 75 c ds v = 10 v pulse test i = 2 a d 2 a 1, 0.5 a gate to source voltage v (v) gs drain to source saturation voltage vs. gate to source voltage v (v) ds(on) drain to source saturation voltage drain current i (a) d drain to source on state resistance r ( ) w ds(on) static drain to source on state resistance vs. drain current case temperature tc ( c) r ( ) ds(on) static drain to source on state resistance w static drain to source on state resistance vs. temperature forward transfer admittance |y | (s) fs forward transfer admittance vs. drain current drain current i (a) d
HAT2050T 5 0.2 0.5 1 2 5 10 0.1 500 200 100 20 50 10 5 50 40 30 20 10 0 0.8 1.6 2.4 3.2 4.0 0 5 20 50 10 0.02 0.05 0.1 0.2 0.5 1 0.01 di/dt = 20 a/ s v = 0, ta = 25 c gs 10 8 6 4 2 2 1 100 0 1020304050 1000 300 100 30 10 3 1 v = 0 f = 1 mhz gs ciss coss crss v gs v ds i = 1 a d v = 5 v 10 v 20 v dd v = 20 v 10 v 5 v dd t f r t d(off) t d(on) t v = 4 v, v = 10 v pw = 5 s, duty < 1 % gs dd reverse drain current i (a) dr reverse recovery time trr (ns) body?rain diode reverse recovery time capacitance c (pf) drain to source voltage v (v) ds typical capacitance vs. drain to source voltage gate charge qg (nc) drain to source voltage v (v) ds gate to source voltage v (v) gs dynamic input characteristics drain current i (a) d switching time t (ns) switching characteristics
HAT2050T 6 5 4 3 2 1 0 0.4 0.8 1.2 1.6 2.0 5 v v = 0 gs 10 100 1 m 10 m 100 m 1 10 100 1000 10000 10 1 0.1 0.01 0.001 0.0001 d = 1 0.5 0.2 0.1 0.05 0.02 0.01 1shot pulse pulse test dm p pw t d = pw t ch ?f(t) = s (t) ? ch ?f ch ?f = 166 c/w, ta = 25 c q g q q pulse width pw (s) normalized transient thermal impedance s (t) g normalized transient thermal impedance vs. pulse width (1 drive operation) when using the glass epoxy board (fr4 40x40x1.6 mm) source to drain voltage v (v) sd reverse drain current i (a) dr reverse drain current vs. souece to drain voltage
HAT2050T 7 10 100 1 m 10 m 100 m 1 10 100 1000 10000 10 1 0.1 0.01 0.001 0.0001 d = 1 0.5 0.2 0.1 0.05 0.02 0.01 1shot pulse dm p pw t d = pw t ch ?f(t) = s (t) ? ch ?f ch ?f = 210 ?/w, ta = 25 ? q g q q vin monitor d.u.t. vin 4 v r l v = 10 v dd tr td(on) vin 90% 90% 10% 10% vout td(off) vout monitor 50 w 90% 10% t f when using the glass epoxy board (fr4 40x40x1.6 mm) pulse width pw (s) normalized transient thermal impedance s (t) g switching time test circuit switching time waveform normalized transient thermal impedance vs. pulse width (2 drive operation)
HAT2050T 8 package dimensions 0.50 0.10 0 ?8 *0.17 0.05 6.40 0.20 0.10 1.10 max 0.13 m 0.65 14 85 4.40 3.00 3.30 max 0.805 max *0.22 +0.08 ?.07 0.07 +0.03 ?.04 0.20 0.06 0.15 0.04 1.0 hitachi code jedec eiaj mass (reference value) ttp-8d *dimension including the plating thickness base material dimension as of january, 2001 unit: mm
HAT2050T 9 cautions 1. hitachi neither warrants nor grants licenses of any rights of hitachi? or any third party? patent, copyright, trademark, or other intellectual property rights for information contained in this document. hitachi bears no responsibility for problems that may arise with third party? rights, including intellectual property rights, in connection with use of the information contained in this document. 2. products and product specifications may be subject to change without notice. confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. hitachi makes every attempt to ensure that its products are of high quality and reliability. however, contact hitachi? sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. design your application so that the product is used within the ranges guaranteed by hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail- safes, so that the equipment incorporating hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the hitachi product. 5. this product is not designed to be radiation resistant. 6. no one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from hitachi. 7. contact hitachi? sales office for any questions regarding this document or hitachi semiconductor products. hitachi, ltd. semiconductor & integrated circuits. nippon bldg., 2-6-2, ohte-machi, chiyoda-ku, tokyo 100-0004, japan tel: tokyo (03) 3270-2111 fax: (03) 3270-5109 copyright ? hitachi, ltd., 2000. all rights reserved. printed in japan. hitachi asia ltd. hitachi tower 16 collyer quay #20-00, singapore 049318 tel : <65>-538-6533/538-8577 fax : <65>-538-6933/538-3877 url : http://www.hitachi.com.sg url northamerica : http://semiconductor.hitachi.com/ europe : http://www.hitachi-eu.com/hel/ecg asia : http://sicapac.hitachi-asia.com japan : http://www.hitachi.co.jp/sicd/indx.htm hitachi asia ltd. (taipei branch office) 4/f, no. 167, tun hwa north road, hung-kuo building, taipei (105), taiwan tel : <886>-(2)-2718-3666 fax : <886>-(2)-2718-8180 telex : 23222 has-tp url : http://www.hitachi.com.tw hitachi asia (hong kong) ltd. group iii (electronic components) 7/f., north tower, world finance centre, harbour city, canton road tsim sha tsui, kowloon, hong kong tel : <852>-(2)-735-9218 fax : <852>-(2)-730-0281 url : http://www.hitachi.com.hk hitachi europe ltd. electronic components group. whitebrook park lower cookham road maidenhead berkshire sl6 8ya, united kingdom tel: <44> (1628) 585000 fax: <44> (1628) 585160 hitachi europe gmbh electronic components group dornacher stra b e 3 d-85622 feldkirchen, munich germany tel: <49> (89) 9 9180-0 fax: <49> (89) 9 29 30 00 hitachi semiconductor (america) inc. 179 east tasman drive, san jose,ca 95134 tel: <1> (408) 433-1990 fax: <1>(408) 433-0223 for further information write to: colophon 2.0

▲Up To Search▲

Price & Availability of HAT2050T

	To Download HAT2050T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .