customer drawing te connectivity 300 constitution dr menlo park, ca 94025, u.s.a. title: soldersleeve low -fire-hazard with pre-installed lead . unless otherwise specified dimensions are in millimeter s. [inches dimensions are shown in brackets] raychem devices document no.: b-151-xx tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron te connectivity reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. rev: e1 date: 15-apr-11 revised by: hmr cage code: 06090 eco number: eco-11-005139 scale: nts size: a sheet: 1 of 1 ? 1998,2011 tyco electronics corporation, a te conn ectivity ltd. company. print date:4/15/2011 if this document is printed it becomes uncontrolled . check for the latest revision. component dimensions cable dimensions part name a min b min l max d max e min f min g max j ? 0.5 (j ? .020) B-151-05 4.3 (.169) 4.8 (.189) 29.3 (1.154) 4.8 (.189) 2.0 (.079) 1.5 (.059) 4.3 (.169) 9.0 (.354) b-151-07 6.4 (.250) 7.3 (.290) 32.5 (1.280) 7.3 (.290) 3.3 (.130) 2.8 (.110) 6.4 (.250) 11.0 (.435) b-151-11 10.0 (.395) 11.5 (.450) 35.5 (1.395) 11.5 (.450) 4.5 (.175) 4.0 (.155) 10.0 (.395) 13.0 (.510) b-151-13 13.0 (.510) 15.1 (.595) 45.5 (1.790) 15.1 (.595) 7.0 (.275) 6.5 (.255) 13.0 (.510) 17.0 (.670) b-151-17 16.5 (.650) 19.0 (.750) 55.0 (2.165) 18.0 (.710) 9.0 (.355) 8.0 (.315) 16.0 (.630) 23.0 (.905) material 1. insulation sleeve: radiation cross-linked modifi ed polyolefin. transparent clear. 2. solder preform with flux: solder: type cd18 per ansi j-std-006. flux: type rom1 per ansi j-std-004. 3. & 4. meltable sealing rings: thermally stabiliz ed thermoplastic. 5. ground lead: raychem 100g0111-1.00-9, stranded t in plated copper. color: white. application 1. these controlled soldering devices are designed for termination of a bare or tin plated copper shie ld on a cable having an insulation rated for at least 85 ? c. 2. temperature range: -55 ? c to +125 ? c. 3. for installation procedure and application equip ment consult rpip-688-01. for best results, prepare the cable as shown:
|
